Bedienungsanleitung Telekom Sinus 1054 data (Seite 3 von 10) (Englisch)

680858

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

14.01.2005 KA_GB_1054_data.fm

SSID

All computers in the domain of a WLAN (wireless local network, radio network) must have the same identity

in order to be recognized by the other computers. It only makes sense to use the SSID of a network which

is within your range.

(Only if you use more than one profile)

Select the profile

you would like to assign an SSID to.

Click the

opening arrow

to the right of the SSID entry field.

You will then be shown the SSID of all networks which are within range of your computer. Select the

SSID you require.

If the SSID of the radio network is not displayed although you are sure that you are within its range,

this usually means that the access point/router is not transmitting its SSID. In this event, you must en-

ter the SSID manually.

Click the

Speichern

(Save) button beside the Profil entry field.

If you have not selected a profile, the selected SSID will be assigned to the current profile. At

the time of the initial configuration this will be the default setting (WLAN).

If you would like to access another network with your computer and it is within your radio range,

you can select this network via the Netzübersicht (Network overview) tab. Then you only have

to select the corresponding profile which you set up at an earlier time.

Betriebsmodus (Operating mode)

When you define the operating mode, you are specifying the kind of network environment you are making

a connection to with your computer and the Sinus 1054 data:

Infrastruktur

(infrastructure): A local network in which the computers can communicate with one another

via cable as well as radio signals. This is achieved by means of one or more access points (also, for example,

routers which have this access function) which are capable of entering other networks. The Infrastruktur set-

ting does not work in ad hoc networks. You cannot set the radio channel because it is dependent upon the

access point.

Ad Hoc:

A local network in which the computers can only communicate directly with one another via radio

signals. There is no access to a cable-linked network. The ad hoc setting does not work in infrastructure net-

works. In this kind of network you have to set the radio channel and all computers must use the same chan-

nel.

Click the

opening arrow

beside the Betriebsmodus (Operating mode) field.

Select the mode you want to use.

Click

Übernehmen

(Apply).

Click

Speichern

(Save) next to the Profil entry field.

Transmission rate

All computers in the domain of a WLAN (radio network) must use the same transmission rate during a con-

nection in order to be able to communicate. The transmission rate, however, can vary depending upon the

strength of the signal (e.g. on account of the distance) or the kind of WLAN access point/router (e.g. a router

of the 11 Mbps class (IEEE 802.11b)) being used. The best setting is therefore

Auto

Click the

opening arrow

beside the

Übertragungsrate

field.

Select the transmission rate you want to use (recommended:

Auto

Click

Übernehmen

(Apply).

Click

Speichern

(Save) next to the "Profil" entry field.

The transmission rate will then be assigned to this profile.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Telekom Sinus 1054 data Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Telekom Sinus 1054 data

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info