Bedienungsanleitung Teltonika RUT905 (Seite 178 von 180) (Englisch)

681331

178

Zoom out

Zoom in

Vorherige Seite

1/180

Nächste Seite

178

DHCP – The Dynamic Host Configuration Protocol (DHCP) is a network configuration protocol for hosts on Internet

Protocol (IP) networks. Computers that are connected to IP networks must be configured before they can communicate

with other hosts. The most essential information needed is an IP address, and a default route and routing prefix. DHCP

eliminates the manual task by a network administrator. It also provides a central database of devices that are connected

to the network and eliminates duplicate resource assignments.

ETHERNET CABLE – Refers to the CAT5 UTP cable with an RJ-45 connector.

AP – Access point. An access point is any device that provides wireless connectivity for wireless clients. In this

case, when you enable WiFi on your router, your router becomes an access point.

DNS – Domain Name Resolver. A server that translates names such as www.google.lt to their respective IPs. In

order for your computer or router to communicate with some external server it needs to know it’s IP, its name

“www.something.com” just won’t do. There are special servers set in place that perform this specific task of resolving

names into IPs, called Domain Name servers. If you have no DNS specified you can still browse the web, provided that

you know the IP of the website you are trying to reach.

ARP – Short for Adress Resolution Protocol,a network layerprotocol used to convert an IP address into a physical

address (called a DLC address), such as an Ethernet address.

PPPoE – Point-to-Point Protocol over Ethernet. PPPoE is a specification for connecting the users on an Ethernet to

the internet through a common broadband medium, such as DSL line, wireless device or cable modem.

DSL – digital subscriber line - it is a family of technologies that provide internet access by transmitting digital data

using a local telephone network which uses the public switched telephone network.

NAT – network address translation – an internet standard that enables a local-area network (LAN) to use one set

of IP addresses for internet traffic and a second set of addresses for external traffic.

LCP – Link Control Protocol – a protocol that is part of the PPP (Point-to-Point Protocol). The LCP checks the

identity of the linked device and either accepts or rejects the peer device, determines the acceptable packet size for

transmission, searches for errors in configuration and can terminate the link if the parameters are not satisfied.

BOOTP – Bootstrap Protocol – an internet protocol that enables a diskless workstation to discover its own IP

address, the IP address of a BOOTP server on the network, and a file to be loaded into memory to boot the machine.

This enables the workstation to boot without requiring a hard or floppy disk drive.

TCP – Transmission Control Protocol – one of the main protocols in TCP/IP networks. Whereas the IP protocol

deals only with packets, TCP enables two hosts to establish a connection and exchange streams of data. TCP guarantees

delivery of data and also guarantees that packets will be delivered in the same order in which they were sent.

TKIP – Temporal Key Integrity Protocol – scrambles the keys using hashing algorithmand, by adding an integrity-

checking feature, ensure that the keys haven’t been tampered with.

CCMP – Counter Mode Cipher Block Chaining Message Authentication Code Protocol – encryption protocol

designed for Wireless LAN products that implement the standards of the IEEE 802.11i amendment to the original

IEEE802.11 standard. CCMP is an enchanged data cryptographic encapsulation designed for data confidentiality and

based upon the Counter Mode with CBC-MAC (CCM) of the AES (Advanced Encyprion Standard) standard.

MAC – Media Access Control – hardware address that uniquely identifies each node of a network. In IEEE 802

networks, the Data Link Control (DCL) layer of the PSO Reference Model is divided into two sub-layers: the Logical Link

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Teltonika RUT905 Seite 178

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info