541660
51
Zoom out
Zoom in
Vorherige Seite
1/65
Nächste Seite
50
Search satellite: This option allows the selection of the satellite that the
system is to search for when being switched on or when the automatic
search or the search by location is initiated. Several satellites covering
different regions and offering programs in different languages are
available. Please note that not all satellites can be received in all locations.
(See appendix 'Search satellites' on page 58)
Search transponder / beam:
Some satellites have several different
footprints. As a consequence, not all channels of a satellite can be
received within the satellite's overall coverage area. Also, it may be
possible that the automatic search will not yield a satellite when a
different footprint is selected for reference. With this menu item, a
footprint suitable for your location can be allocated to each satellite in
accordance with the specifications of the satellite operator.
Automat. satellite-swap:
When set to "Active", the system will check at
every program change whether the new program selected can also be
received from a satellite other than the current one. If such a satellite
change is recognized, the system will automatically adjust to the new
satellite.
To deactivate the automatic satellite-swap, set the setting to "Off". This
may be necessary if the automatic satellite-swap does not function
because of weak signals or if you prefer to perform a manual search (see
"Automatic satellite-swap" on page 50).
Reset search parameters:
Select this menu item and confirm it with
OK when you assume that your satellite system does no longer reliably
find the selected satellite via the automatic search or the search via
location. The satellite search function is reset to the default settings.
Please note that the first search after a parameter reset may take quite a
long time. This function should hence only be used after due
consideration.
51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Ten Haaft Caro wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Ten Haaft Caro

Ten Haaft Caro Bedienungsanleitung - Deutsch - 76 seiten

Ten Haaft Caro Bedienungsanleitung - Holländisch - 36 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info