4
GETTING STARTED
DAB/FM AERIAL
Before using your radio for DAB or FM reception, always
fully extend the telescopic aerial. The telescopic aerial
has a swivel base to enable it to be adjusted to dierent
positions for the clearest sound.
CONNECTING POWER
Before connecting the power, check that the mains
voltage on the rating plate of the AC adapter is the same
as the voltage in your area.
Connect the small plug into the DC IN jack on the •
back of the unit.
Plug the AC adapter into the wall socket and switch •
the mains power on.
The unit is now ready for use.
NOTE:- The AC adapter may become warm during
operation - this is normal.
SETTING THE CLOCK
The clock on your radio is automatically set when rst
used from the time signal broadcast with DAB radio
stations.
If a DAB station is not available, the clock may be set
manually via the MENU system (see page 7).
FITTING BATTERIES
You can t a set of batteries for fully portable operation.
Referring to the diagram, press the catches on the •
battery compartment lid in the direction shown and
lift the lid o.
Fit 4 x C (UM-2) batteries (not supplied) into the •
battery compartment, observing polarity as shown.
Lay the batteries over the ribbon as shown to help
with removal. Alkaline batteries are recommended
for best performance.
Re-t the battery cover.•
BATTERY DISPOSAL
Dispose of used batteries with regard to the recycling
regulations in your area. Do NOT short circuit batteries or
throw them into water, the general rubbish or in a re.
Weak batteries can leak and damage the radio. Replace
them in good time!
