703890
15
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
15
· Cinebar 50
If a problem should occur, please check through
the following advice before contacting our ser-
vice staff.
No power
Ě Please check whether the plug is properly
inserted in the mains socket.
Ě Check whether the corresponding electric
circuit is live.
No sound or poor sound output
Ě You may have inserted an incompatible disc.
To test this, insert an audio CD into your playback
appliance and use the remote control to select
the correct input.
Ě Check whether the television and Cinebar 50
are switched on and ensure the correct
programme source is selected.
Ě Check the cable connection between the TV,
player and Cinebar 50.
Ě Check whether the mute function has been
activated.
Ě Check whether the subwoofer is switched on.
Ě The USB device is not recognised or does not
contain any readable data. First try to play
other tracks or another medium.
Ě Condensation may have formed in the appliance.
Remove the USB device and leave the appliance
switched on for one to two hours.
Malfunctions
Ě If the Cinebar 50 System malfunctions,
disconnect the device from the power supply
for at least 30 minutes. Then connect the
Cinebar 50 unit again. The internal restore
function should reset the appliance.
No surround sound playback
Ě The transfer of surround-encoded data requires
a digital connection to the Cinebar 50 Unit.
Ě Check whether the operating mode has been
set to “Reference” or “Wide” (mode button).
Ě Not every DVD has surround sound. Try inserting
another DVD to test this.
The remote control does not work
Ě First check whether the batteries are still
charged and if necessary replace them.
Ě Point the remote control at the sensor on the
Cinebar 50 Unit.
Ě Make sure that there are no obstacles between
the remote control and Cinebar 50 Unit. Remove
these, if necessary.
Ě Check whether the batteries in the remote
control have been inserted with the correct
polarity.
Ě Check whether the batteries have leaked.
Ě Check whether there are fluorescent lamps
close by.
The appliance does not react to input com-
mands
Switch the appliance to standby and switch it on
again. If this doesn’t help, switch the system off
completely and then on again. To do this, switch
the Cinebar 50 Unit to standby. Now switch the
subwoofer off and disconnect the power supply
to the Cinebar 50 Unit. Follow this procedure in
reverse to switch the system on again.
The USB stick is not recognised
Due to the wide variety of USB sticks on the mar-
ket, it is not possible to guarantee 100% compa-
tibility with all sticks. We have had the best test
results with the latest USB memory sticks (using
the USB 2 standard).
No MP3 playback/noisy MP3 playback
Ě If data files and MP3 files are mixed together
on the same data storage device, playback
may be noisy or even blocked altogether.
Ě Check to see whether all of the files on the
storage medium are MP3 files. If necessary
skip files and try to play other MP3s.
Troubleshooting
15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Teufel Cinebar 50 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info