Bedienungsanleitung TFA 30.5034.02 Domino (Seite 1 von 2) (Englisch)

576785

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

708mm

90mm

59mm

Instruction Manual

DOMINO

Remote Thermo-Hygrometer

for Smartphones

[For iPod, iPhone and iPad User] Nr. 30.5034

Main Unit

Location of control

1. Connect

2. Reset

3. Battery

compartment

Stand

Screws

distance

30mm

Sensor ID label

LED

Features

Thank you for choosing the DOMINO Remote Thermo-

Hygrometer from TFA.

Before you start using it

• Please make sure to read the instruction manual

carefully.

• Following and respecting the instructions in your

manual will prevent damage to your instrument and

loss of your statutory rights arising from defects

due to incorrect use.

• We shall not be liable for any damage occurring as a

result of non-following of these instructions.

Likewise, we take no responsibility for any incorrect

readings and for any consequences which may

result from them.

• Please take particular note of the safety advice!

• Please keep this instruction manual for future

reference.

Field of operation and all the benefits of your new

instrument at a glance

• Temperature and humidity by means of a transmitter via

Bluetooth (BLE 4.0) with a range of up to 40 m

• Climate control for outside or inside

• Free app for easy operation

• Maximum and minimum values

Various international parameters for climate monitoring

such as WBGT

• Constant updating (while within transmission range)

• Simple link-up also possible with multiple devices

How to Install Sensor and RTH App

1. Install battery

1.1 Open the battery compartment.

1.2 Insert 2 x AAA batteries in polarity (+) and (-)

as indicated.

1.3 Close the battery compartment.

2. Install RTH App on your smartphone.

2.1 Access App Store and search for RTH .

2.2 Select and install RTH App on your mobile device.

Connect Your Sensor with RTH App

3. Connect sensor with RTH App

3.1 RTH App will check your Bluetooth condition. If

Bluetooth is it will show pop up menu on display.

Press and then

turn the Bluetooth in your mobile.

3.2 Start RTH App in your mobile device.

Connect Your Sensor with RTH App

Change Another Sensor with RTH App

5. Change another sensor

OFF

Settings

3.5 After a successful connection,

the pop up menu above will

show you the connected sen-

sor ID (eg. sensor _AA302C.

(This code is printed on the

sensor)

3.6 If the sensor is not working

properly, press the RESET

button with a pointed object.

4. Repeat step 2-3 to connect

additional mobile devices

with the same sensor (The

sensor unit is able to support

multiple mobile devices).

5.4 After a successful connection,

the pop up menu above will

show you the connected sen-

sor ID (eg. sensor _AA3031).

Make sure the ID belongs to

your desired sensor. If the

connection fails, the existing

sensor connection will be

kept.

5.5 After changing the sensor,

you may need to clear all

the recorded data. (See

No.10 Clear recorded

contents.)

3.3 For first connection

press and hold the

CONNECT button

on the sensor for 2

seconds. The red LED

on front side will light

up for 2 seconds and

flash until connection

succeeds.

3.4 During connection

“Connecting...” will

pop up on the display.

5.1 Press and hold the

CONNECT button

on the sensor for 2

seconds. The red LED

on front side will

light up for 2 seconds

and flash until

connection succeeds.

5.2 Open the RTH App. The

pop up menu above

appears. The user can

select confirm

another sensor or

to keep the existing

sensor connection.

5.3 During connection

“Connecting...” will pop

up on display.

AA302C

Yes

8.3 After pressing

appears at each

index, except “Fahrenheit /

Celsius” and “Recorded

MAX / MIN” contents.

8.5 Press button and your

home screen will show the

indices in the sequence you

set.

8.1 User can turn or

to each index

by swiping the switch.

8.2 User can personalize

the sequence of

indices by pressing

the button.

Index Setting

8. Index setting

Index Setting Change The Temperature Reading

9. Change format reading

9.1 To change temperature

reading in Fahrenheit or

Celsius, press button

to enter setting.

9.2 At Fahrenheit / Celsius

row switch °C / °F to

your desired format.

How to Personalize Home Page Screen

7. Personalize you home page

Press left corner icon to enter setting. User can turn

each index or .

If all indices are turned the home screen will show as

below.

OFF

9:41 AM3G

Temperature

°C

Temperature

27.0

Humidity

75%

Humidity

Therm Hygrometer

Remote

9:41 AM3G

Temperature

CURRENT

75%

MAXIMUM

80% 90%

MINIMUM

20% 10%

DAILY

MAXIMUM

MINIMUM

RECORDED

Therm Hygrometer

Remote

Temperature

CURRENT

27.0

°C

9:41 AM3G

MAXIMUM

28.5°C 30.0°C

MINIMUM

6.0°C 3.5°C

DAILY

MAXIMUM

MINIMUM

RECORDED

Therm Hygrometer

Remote

OFF

8.4 Press and hold to

drag any index up or

down to personalize

your own sequence.

Flu Index

CAUTION

29°C

Review DAILY / RECORDED Contents

6. Swipe the screen of Temperature and Humidity left and

right to browse the Maximum and Minimum records.

6.1 DAILY: Resets automatically at 0:00

Recorded data between 0:00 to the time

you view daily Max / Min

RECORDED: Recorded highest and lowest values

since the last manual reset

Flu Index

CAUTION

29°C

Humidity

MAXIMUM

80% 90%

MINIMUM

20% 10%

DAILY

MAXIMUM

MINIMUM

RECORDED

75%

CURRENT

Temperature

MAXIMUM

28.5°C

MINIMUM

6.0°C 3.5°C

DAILY

MAXIMUM

30.0°C

MINIMUM

RECORDED

27.0

°C

CURRENT

Swipe the screen to the

right: The DAILY and

RECORDED Temperature

Max / Min. appears

Swipe the screen to the

left: the DAILY and

RECORDED Humidity

Max / Min. appears

9:41 AM3G

TFA 30.5034.02 Domino Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TFA 30.5034.02 Domino

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info