IMPORTANT SAFEGUARDS
4
17
TROUBLE SHOOTING
HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
32. Do not use any accessories or attachments with this appliance other than those recommended by the supplier,
as unapproved attachments may result in personal injury.
33. The manufacturer and distributor are not responsible for any damage caused to this appliance due to incorrect use.
34. This appliance must only be used to process liquids or soft solid foods. It is recommended to thaw frozen
foods to room temperature to reduce strain on the blades and enable ingredients to cook evenly when using the
cooking functions.
35. When crushing ice or pieces of frozen fruit to make smoothies or cold drinks, do not process more than the equivalent
of 4 ice cubes or pieces of frozen fruit up to a maximum size of 2.5x2.5x2.5cm (1x1x1in) at one time. Ice and frozen
fruit may only be processed inside the Infusion Chamber.
36. Although a limited amount of ice or frozen fruit can be placed inside the Infusion Chamber when making smoothies
or other cold drinks, this appliance should not be used as an ice crushing device or to process foods that are frozen
solid, as this may damage the blades and cause them to get stuck and overheat the motor, which can in turn burn the
motor fuse.
37. This unit is not suitable for boiling milk and/or other dairy products.
38. Before turning the appliance on, make sure all parts are properly assembled (refer to ‘Assembly’ section below).
39. Before placing foods in the appliance for processing, make sure all wrappers have been removed (i.e., paper,
aluminum foil or plastic).
40. Avoid contact with moving parts while the appliance is in use to prevent personal injury or damage to the appliance.
41. Never place fingers or any kitchen utensils into the container. Use the measuring cup to add ingredients into the
container.
42. Do not operate the appliance without the lid. Make sure the lid completely seals the container before turning the
appliance on to avoid splashing or injury from a projectile.
43. Remove the measuring cup from the lid when mixing hot liquids. To prevent burns, do not touch the lid.
44. When making soup and using the “BLEND” function, do not fill the container past the SOUP MAX/BLEND MAX marking.
45. The MAXIMUM hot liquid overflow sensor should never get in contact with liquid, to avoid overheating.
46. The container will be very hot after cooking or warming. To avoid burns, do not touch the container directly without
allowing sufficient time to cool.
47. As the container body gets hot during use, always use the handle to pick it up.
48. When removing the container from the unit base, always turn power off and unplug the unit.
49. When boiling/cooking liquid or food, CAUTION IS REQUIRED during the mixing process as hot steam may escape
through the lid.
50. Special care must be taken when removing the lid at the end of any cooking process, as it will be very hot and heat/
steam will be emitted.
51. Always observe the appliance carefully when any of the functions are on. The sensors are very particular and will react
only in the following specific situations. The MINIMUM liquid sensor only reacts if a cooking cycle is started without
enough liquid in the container. This sensor will not react if the water level in the container drops below the MIN mark
during cycle. The safety micro-switch cut-off (aka the internal sensor) will react, but only when the liquid in the
container is completely evaporated. The MAXIMUM hot liquid overflow sensor only reacts during cooking processes
(excluding the “REHEAT” function) or if a cooking cycle starts with too much liquid.
52. Always wait until the motor completely stops before removing the lid or the container.
53. Always unplug the appliance from the outlet when not in use and before removing parts for cleaning.
54. After use, make sure to wipe down any spills on the unit and the outside of the container. The Infusion Chamber
should be cleaned immediately after use.
55. Let the appliance cool down (at least 15 min) before cleaning and storing.
56. To avoid personal injury, care must be taken when cleaning the hot plate and the stainless steel blades, as the blades
are very sharp.
57. The FlavorFull™ container, lid and measuring cup should not be stored in the refrigerator or freezer.
58. The unit base and container are NOT to be put in the dishwasher; only the lid, measuring cup and Infusion Chamber
are dishwasher safe.
Problem Solution
The lid is loose or not closed
properly.
Not enough liquid in the container.
Liquid or food is touching the
MAXIMUM hot liquid overflow
sensor at the upper end of the
handle inside the container.
The container is not seated
securely on top of the unit base.
The security system is blocked.
The container lid is loose and is not
locked in properly.
The lid is not locked into place
correctly. The security system is
blocked.
Liquid or food has reached the
MAXIMUM hot liquid overflow
sensor at the upper end of the
handle inside the container.
The contents of the container are
not sufficient.
The container is loose and not
connected with the base properly.
Remove the lid and make sure to lock into place
properly. Refer to the “Assembly” section of this
User’s Guide.
Add more liquid so that it extends slightly above the
MIN mark.
Remove some liquid or food from the container,
and clean and dry the MAXIMUM hot liquid overflow
sensor completely.
Secure the container onto the unit base properly.
Refer to the “Assembly” section of this User’s Guide.
Remove the lid and make sure to lock into place
properly. Refer to the “Assembly” section of this
User’s Guide.
Lock the lid into place properly. Refer to the
“Assembly” section of this User’s Guide.
Remove some liquid or food and clean and dry the
sensor completely.
Add more liquid so that it extends slightly above the
MIN mark.
Secure the container onto the unit base properly.
Refer to the “Assembly” section of this User’s Guide.
The unit is beeping and the lights are
flashing continuously
The unit is beeping.
The unit is not starting.
The unit has stopped during a cycle
(mid-program).
The ingredients may contain too
much sugar or starch.
There was too much food and not
enough liquid in the container.
Some of the liquid could have
evaporated during the selected
cooking process.
The inside of the container was not
cleaned properly the last time it
was used and the leftover food has
burnt.
Watch the cooking process closely. If possible, use
less sugar or starch-containing ingredients.
Next time, make sure to add some more water/
broth/juice, but not above the MAX mark. Always
observe the unit while cooking, and if too much liquid
evaporates add some as needed.
Empty the container and clean it properly and try the
cycle again. Refer to the “Cleaning & Maintenance”
section for cleaning User’s Guide.
The f
heating plate.
