Bedienungsanleitung Thermor Equateur 2 (Seite 91 von 94) (Englisch, Französisch)

648194

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

User’s manual User’s manual

 89

12.1.2 - The WIRE PILOT programme

By default, the programme mode on every day of the week is the external programme, the

one responding to the “pilot wire” order (FP) sent by the centralised external programming.

Using this, if your device is connected to a centralised programming installing, you have

no manipulation to be made other than to put yourself in Prog mode.

Press on key

Equilibrium

Set : D/H/Min

Setting appears on the screen.

Press once on key

Set : Prog

Prog Setting appears.

Validate by

Press on keys

PROG: Central.

PROG : FP displayed on screen.

Validate by

To leave menu, press

on key

Equilibrium

Day Hour

Return to rest screen.

To activate the Prog

mode, press several

times on the right

 or left hand 

movement keys until

the selection arrow is

on Prog mode.

The mode selection  ashes

above the mode during selection.

13 - IF YOU HAVE A LOAD SHEDDING

If your installing includes a consumption reducer, this can alternatively cut the heating

radiators (depending on your contract with your energy supplier).

Caution, A load shedding system by a power supply cut is incompatible with our radiators

because it damages the thermostat. During load shedding periods, your radiator will

display « Load shedding ». It then returns to its initial operating mode.

During consumption reduction periods, your radiator will display “Consumption reduction”.

It then goes back to its initial operating mode.

14 - MAINTENANCE

Do not perform any maintenance action before switching your equipment off by doing a

long press on the

button.

If you want to maintain the performances of your radiator, you will need to use a vacuum

cleaner or a brush to remove dust from the lower and upper radiator grills about twice

every year.

You can clean the radiator with a damp cloth; never use abrasive products or solvents.

Dirt can accumulate on the radiator grill in a polluted environment. This phenomenon is

related to the poor quality of ambient air. It is recommended that correct aeration of the

room (ventilation, air intake, etc.), and cleanliness of the air should be veried if this arises.

Such dirt will invalidate the radiator replacement guarantee.

15 - IF A PROBLEM OCCURS

Problem encountered Check to be made

The radiator does not

heat

If you are in programming, make sure that the program is in

COMFORT mode.

Make sure that the circuit breakers of the installation are

closed or that the load shedder (if you have one) has not

switched the heating off (see part 13 "If you have a load

shedding).

Check the air temperature in the room; if it is higher than

the set temperature, the heating pictogram will not come on

and the radiator will not heat.

The radiator heats all

the time

Check that the radiator is not located in a draft, and that the

temperature setting has not been modied.

Equateur2_1880-1585_interieur.indd 89 18/06/12 06:23

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thermor Equateur 2 Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info