Bedienungsanleitung Thomson 40FW3324 (Seite 14 von 15) (Englisch)

560346

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

EN 14

Other informationChapter 6

1. Press Option on the remote control and select

Quick access > PVR.

2. Press OK/► to enter.

3. Press:

- the red button to start recording, the record file is

put into a folder named after the channel number

under the PVR folder in Media center > Video;

- ▲/▼/◄/► to adjust the recording duration.

- the green button to stop recording manually;

in normal operation, the recording will stop

automatically when the recording duration has

passed.

4. In recording, PVR mini pane will also show on the

screen to indicate the recording progress.

5. To watch the recorded programme, exit PVR

mode first and go to Media center > Video. Select

the folder PVR, then select the related record file.

Press OK to play. (It is the same if you record a

digital radio programme).

Notes:

- Feature available only for digital non encrypted

channels. Even when CICAM (CI or CI+) is

inserted, feature is not available on encrypted

channels.

- Only supports USB drive of FAT32 format.

- Before you connect the USB drive to the set,

make sure you have backed up the data in the

drive to avoid the loss of your important data due

to unforeseen malfunction.

- The bigger the USB drive free memory for the

PVR function, the bigger the recording length.

- If you want to change channel or signal source

during recording, store the recording data before

changing the channel or source.

- The set cannot play files normally if the

parameters of the file exceed the limitations of

the system, the file format is not supported, the

file is damaged, or the file cannot be decoded.

- Do not disconnect the USB drive when the

system is reading a file or transmitting data,

otherwise the system or the drive may be

damaged.

Schedule list

This function is used to perform scheduled recording.

1. Press Option on the remote control and select

Quick access > Schedule list.

2. Press OK/► to display the schedule list.

3. To add a schedule into your schedule list, press

the red button first to display Schedule list. Then,

- Channel number: use ◄/► to select the

channel number.

- Start date: use the numeric buttons to set the

recording date.

- Start time: set the start time of the recording.

- Stop time: set the stop time of the recording.

- Schedule type:

• Set Reminder to be reminded that you can

switch to the scheduled programme when the

time you have set comes. When time is out

and you do not execute any operation, the

dialogue box will disappear and no further

operation will be executed.

• Set Record if you really want to start your

scheduled recording when the time you have

set comes. When time is out and you do not

execute any operation, scheduled recording

will start automatically.

- Repeat type: set different repeat modes for the

recording.

4. Press ▲/▼/◄/► to select Add, then press OK to

add the schedule you set into your schedule list.

5. Press the red button to repeat above procedures

to add another schedule.

6. If you wish to edit or delete a schedule, select it

and press OK to enter.

7. Press Exit to close the menu.

MHL (Mobile High-Definition Link)

(* not available for some models)

You can use the following functions by connecting the

TV HDMI port identied with MHL and the USB port of

mobile phone or similar device with an MHL cable.

• Charge your mobile phones from the TV.

• Two-way remote operation between TV and

mobile phone.

• Video/Audio output from your mobile phone.

Notes:

- These functions may not be available depending

on the connected equipment.

- If there is no more battery life left in the

connected device, charging will not start.

- To operate the mobile phone with the TV remote,

you need to turn on the T-Link function first,

then press Option and select Quick access >

T-Link > Setup > Guide Menu. Follow the

virtual keypad to do operations.

Connecting MHL-compatible Device

• Connect the MHL-compatible device to the

HDMI port identified with MHL on the TV using

an MHL cable (not supplied), charging will start

automatically.

• When connecting an MHL-compatible device to the

HDMI port identified with MHL on the TV, switch the

TV source to HDMI 2 or HDMI.

Note: Do not connect the MHL-compatible device

to any ports other than HDMI port identified

with MHL.

When using MHL

• Interoperability with MHL devices from other

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson 40FW3324 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Thomson 40FW3324

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info