627611

Thomson CT390 Seite 4

4
Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
EN
CLOCK RADIO
CT390
INSTALLATION
• Plug the mains adaptor into the socket.
• Insert the mains adaptor plug in the power connector at
the back of the device.
• Only use the adaptor provided. If you wish to
use another adaptor, ensure that it has the same
specications and complies with current standards.
SETTING THE TIME AND DATE
Automatic conguration:
After connecting the device, the radio is off; press SYNC
TIME to automatically congure the clock using RDS
frequencies. If this is not possible due to poor frequency
reception, you can congure the clock manually.
Manual conguration:
• Press SET: the hours display ashes the (clock set).
• Turn the TUNING/ADJUST wheel to set the hours.
• Press MODE to set the minutes.
• Turn the TUNING/ADJUST wheel to set the minutes.
• Press MODE to change the date.
• Turn the TUNING/ADJUST wheel to set the current
year.
• Press MODE to change the month.
• Turn the TUNING/ADJUST wheel to set the month.
• Press MODE to change the day.
• Turn the TUNING/ADJUST wheel to set the day.
• The settings will be conrmed in 10 seconds.
ALARM 1 AND ALARM 2 SETTINGS
The device has 2 different alarms that can be set on different
modes (BUZZ, RADIO, WEEK and WEEKEND).
• Press SET twice: the alarm time display ashes (Alarm1
set).
• Turn the TUNING/ADJUST wheel to set the hours.
• Press MODE to change the minutes.
• Turn the TUNING/ADJUST wheel to set the minutes.
• Press SET: the alarm time display ashes (Alarm2 set).
• Turn the TUNING/ADJUST wheel to set the hours.
• Press MODE to change the minutes.
• Turn the TUNING/ADJUST wheel to set the minutes.
• Press SET to exit the alarm settings.
ACTIVATING AND SELECTING ALARM1 OR ALARM2
MODE
• Press / repeatedly to select the type of alarm
function:
• BUZZ WEEK: the alarm rings every day of the week.
• BUZZ WEEKEND: the alarm rings every day of the
week, except on weekends.
• RADIO WEEK: the alarm starts the radio every day of
the week.
• RADIO WEEKEND: the alarm starts the radio every day
of the week, except on weekends.
USE
DEACTIVATING THE ALARM
• To deactivate alarm 1 or alarm 2, press or
repeatedly until the alarm lights turn off.
ALARM REPEAT (SNOOZE)
• Touch or pass your hand over the SNOOZE SENSOR
proximity sensor to stop the alarm. The alarm will
sound every 9 minutes. The word SNOOZE ashes
intermittently until the alarm sounds again.
SWITCHING OFF THE ALARM
• Press / to turn off the alarm. It will ring again the
next day (after 24 hours).
USING THE RADIO
The reception of RDS signals depends on the physical
location of the device. An obstacle between the FM
transmitter and the device can affect radio reception
(furniture, high voltage power cable, etc.).
• Press RADIO to switch on the radio and the LCD screen
will display the FM frequency.
• Turn the TUNING/ADJUST wheel to search for the
frequency. The frequency steps are of 0.05 MHz.
• Turn the VOLUME wheel to adjust the volume.
• While the radio is playing, press the SET button
repeatedly to display the programme service (PS),
programme type (PTY) and radio text (RT). The
information is available if the RDS is active and there is
adequate signal strength.
• Press RADIO to put the device on standby.
Note: use and position the wire aerial to improve reception
of FM signals.
SAVING YOUR FAVOURITE RADIO STATIONS
• Turn the TUNING/ADJUST wheel quickly to set the
closest radio station. The search automatically stops
once a transmitted radio station is correctly identied.
• To save a station, press and hold the MODE button
for 2 seconds. Repeat these steps to pre-set up to 20
stations.
ACCESSING THE MEMORISED STATIONS
When the radio is switched on:
• Press the MODE button repeatedly to go from one
saved station to another (P01 to P20).
INDOOR AND OUTDOOR THERMOMETER
Measuring the indoor temperature:
• The device’s built-in probe measures the indoor room
temperature. It is permanently displayed at the bottom
of the small LCD screen.
Measuring the outdoor temperature:
• Remove the battery compartment cover of the external
probe.
• Insert 2 LR03 1.5 V batteries, ensuring that the polarity
is as indicated.
• Set the external probe switch to I: this will switch on the
red light.
• Replace the battery compartment cover of the external
probe.
• Press SYNC TEMP at the back of the device to start
synchronisation. The two dashes at the bottom of the
screen ash.
• The synchronisation is nished when the temperature
is displayed.
• The temperature of the probe is detected every minute.
Note: the external probe has a maximum range of 20
metres.
ADJUSTING THE BRIGHTNESS OF THE DISPLAY
• Press DIMMER to adjust the backlight intensity of the
two LCD screens.
USB CHARGER SOCKET
• Allows you to charge your Smartphone or MP3 player
battery.
AUXILIARY IN
Allows you to play music from an external audio source on
the radio speakers.
• Use a male/male 3.5 mm jack cable (not provided).
• Insert one of the male jack plugs into the MP3 player or
Smartphone device.
• Insert the other male jack plug into the AUX IN input at
the back of the device.
• Switch the radio on.
• The music being played on the external audio source is
played on the radio.
DESCRIPTION OF THE PRODUCT
4
1
8
19
13 33
16 18151214 1411
7 6
5
10 9
9 10
17
8
2
4
5
20
22
23
21
ON OFF
1 Main LCD display
2 Temperature LCD display
3
SNOOZE
SENSOR
Alarm repeat
4 SET
Time, date and alarm settings/ (in
radio mode) details of the RDS
function
5 MODE
Settings mode/radio station
storage
6 DIMMER Backlight intensity settings
7 SYNC TIME Time synchronisation using RDS
8 RADIO Switching on/off the radio
9 VOLUME Volume settings
10
TUNING
ADJUST
Radio frequency settings/changing
the settings
11 Function selector for alarm 1
12 Function selector for alarm 2
13 SYNC TEMP
Synchronisation of the external
probe
14 Battery compartment
15 USB socket: USB charger
16 Power outlet
17
MP3 Connect
Auxiliaire IN
Auxiliary audio source input
18 FM antenna
19 Loudspeaker
20
External temperature thermal
sensor
21 Indicator light
22 I/O (On/Off)
23 Battery compartment
… 4 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

thomson-ct390

Suche zurücksetzen

  • Geht der Weckruf (Musik) nach einer Stunde automatsch aus Eingereicht am 4-8-2019 09:54

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Thomson CT390 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info