Bedienungsanleitung Thorma Levanto (Seite 5 von 29) (Deutsch, Englisch)

745838

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

LANDSCAPE, LIVORNO, LEVANTO

2.9 Problem sources and their solving

In case of failures (e.g. smoke) appearing during operation, contact your local competent chimney sweeper. If damage is

caused to the fireplace, contact the shop where you purchased the fireplace. These are the most common failures, their

sources and solutions:

Type of failure

Possible cause

Solution

Smell creating

Used protective paint drying

out, evaporation of oil

residues.

Operate the fireplace according to the operation manual for few

hours at low power. Then heat for few hours at maximum power.

Too low thermal

power

Selected power is too small.

Insufficient chimney blast.

Smoke tube is incorrectly

connected.

Let the heat necessity be checked by an expert.

Chimney blast must be at least 12 Pa! Check the chimney for

tightness. Doors of other devices connected to the chimney must be

closed tight. Ensure tightness of cleaning covers. Possibly use 1,5 m

long vertical smoke tube (slope path).

Check the smoke tube.

Fireplace reeks

and smokes

Smoke is insufficiently drawn

away (obstructed chimney or

return flow in chimney).

Chimney is too weak.

Combustion of wet wood.

The cause is nearly always in the area of combustion gases route.

Check the smoke tubes and chimney blast, if possible, consult a

chimney sweeper.

Only use well dried wood.

Glass in stoker

door gets

quickly dirty with

soot

Incorrect combustion, e.g.

wet wood.

Smoke is insufficiently drawn

away (obstructed chimney or

return flow in chimney).

Only use well dried wood.

Check the smoke tubes and chimney blast, if possible, consult a

chimney sweeper.

Fireplace heats

too strong

Sealing of stoker door is

damaged.

Change the seal.

Curl of smoke,

puff of smoke

Sometimes obstructed

chimney or return flow in

chimney.

When all air suppliers are

closed.

Too much fuel in hearth.

Consult a chimney sweeper.

During operation, all air suppliers cannot be closed.

Only add one layer.

Damage to grate

Grate is burnt through, or

scaled.

Burning of grate is always caused by full ash box. Empty ash box.

2.10 Accessories list

- protective glove

- manipulating handle

2.11 Spare parts list

- stoker door

- stoker door glass

- stoker door gasket

- stoker door handle

- vermiculittes set

- ash box

- cast-iron grate

- steel grate for saving of glass

Only use these spare parts.

3. Warranty

If a failure of function or failure of surface coating appears during the warranty period, never repair it yourself. Warranty and

after-warranty repairs are performed by the manufacturer.

We guarantee for the quality, function and elaboration of the fireplace for the period of 2 years from the date of purchase by

customer, in terms that all failures undoubtedly caused by incorrect manufacturing we repair in short time at our own expense,

under the condition that the fireplace:

- was operated exactly according to the manual

- was connected to the chimney according to the standards

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thorma Levanto Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info