Bedienungsanleitung Tiptel 3020 (Seite 1 von 2) (Englisch)

628721

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Hardware Overview

LEDs

1. Power Indicator: Steady green when power on, blinking green when the call is ringing.

2. Line Keys

Steady green: during the conversation, or plan to dial a call.

Blinking red: the call is ringing.

Off: idle interface

Place a call

Three ways to make a call:

1) Handset: Pick up the handset; enter the number, and then press the send soft key or

press

2) Speaker

: Press or the line keys; enter the number, and then press the send soft key

or press

3) Headset: Press ; enter the number, and then press the send soft key or press .

Note: You can also use Contacts or call log to dial the number you want, press place the

call by the three ways mentioned. More, you can also alternate the mode during the call.

End a call

To end a call in three different modes:

1) Handset: hang up the handset or press the cancel soft key.

2) Speaker: press , or press the cancel soft key

3) Headset: press the cancel soft key.

Answer a call

1) Handset: pick up the handset;

2) Speaker: press ;

3) Headset: press .

Note: You can also reject the call by press the Reject soft key.

Redial

Press to redial the last call that dialed.

Hold

Press or press the hold soft key during a call to hold the call,

Press

or resume soft key to resume the call.

Call Transfer

Blind Transfer

a. Press or transfer soft key during the conversation, the call is on hold now.

b. Enter the number that transfers to.

c. Press

or the transfer soft key, and now the blind transfer completed.

Attended Transfer (at least one line key set as Auto)

a. Press or transfer soft key during the conversation, the call is on hold now.

b. Enter the number that transfer to, and press the send soft key or

c. Start the second conversation, press

or transfer soft key, then, transfer completed.

Semi-Attended Transfer (at least one line key set as Auto)

a. Press or transfer soft key during the conversation, the call is on hold now.

b. Enter the number transfer to, and then press

, then you can hear the ring tone.

c. Press

or the Tran soft key, and now the Semi-attended transfer completed.

Call Conference

Assuming that A and B are in conversation. A wants to bring C (or D & E) in a conference:

1) A press line 2, the call is placed on hold.

2) A enter the number of C and then press send soft key or

. C answers the call.

3) A press

or the conference soft key, then A, B and C are now in a conference.

4) If add D&E, press Line 3, the current conference is on hold, dial D and press

, the four

are in conference. Press line 4, and dial E, press

, then A,B,C,D,E are in conference.

Note: 1) If C does not answer the call, A can back to continue the conversation with B; 2)

Once A hangs up the call, the conference is ended, while if B or C drops the call, A&C or

A&B conversation continues.

Call Mute

Press to mute the microphone during the call

Press

again to un-mute the conversation.

Alphanumeric

Keypad

Message

Speaker

Headset

Transfer

Information

Hold Volume Keys

Redial / Send

Speaker

DSS Keys

Conference

Mute

Navigation

Soft Keys

Line Keys

Power Indicator

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tiptel 3020 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tiptel 3020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info