Zoom out
Zoom in
Vorherige Seite
1/6
Nächste Seite
LED
NO LED
A
B
C
D
E
F
G
FUNCTION
Sound
Sound
Sound
Sound
Sound
Power
Connection
COLOUR
None
Blue
Blue
Blue
Blue
Red
Orange
Red
INDICATION
Sound level in nursery does not exceed
recognition threshold
Sound level 1
Sound level 2
Sound level 3
Sound level 4
Maximum sound level
Parent unit ON
Parent unit is securely docked on the station
and connection is good
parent unit LEDs
LED
H
I
FUNCTION
Power on
Low battery
COLOUR
Green
Red
INDICATION
Power is on
Battery level is low and needs to be replaced
baby unit LEDs
TEMPERATURE
BATTERY
Degree
Celsius
Fahrenheit
Empty and needs to be recharged
1/3 Battery Level
2/3 Battery Level
Full Battery Level
ON
baby unit icons
A
B
C
D
E
IH
G
F
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    baby unit icons

    parent unit LEDs
    A B C DE

    Degree
    Celsius
    Fahrenheit

    TEMPERATURE

    BATTERY

    ON

    Empty and needs to be recharged
    1/3 Battery Level
    2/3 Battery Level

    F

    Full Battery Level

    G

    LED

    FUNCTION

    NO LED

    COLOUR

    INDICATION

    None

    Sound level in nursery does not exceed
    recognition threshold

    A

    Sound

    Blue

    Sound level 1

    B

    Sound

    Blue

    Sound level 2

    C

    Sound

    Blue

    Sound level 3

    D

    Sound

    Blue

    Sound level 4

    E

    Sound

    Red

    Maximum sound level

    F

    Power

    Orange

    Parent unit ON

    G

    Connection

    Red

    Parent unit is securely docked on the station
    and connection is good

    baby unit LEDs

    H

    I

    LED

    FUNCTION

    COLOUR

    INDICATION

    H

    Power on

    Green

    Power is on

    I

    Low battery

    Red

    Battery level is low and needs to be replaced



  • Page 2

    DECT digital monitor
    INSTRUCTIONS FOR USE

    model 1082



  • Page 3

    baby unit (=BU)

    parent unit (=PU)

    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11

    12
    13
    14
    15
    16
    17
    18

    Power on/off. Screen illuminates when power is on.
    Nightlight control (low, medium, high).
    Low battery.
    Low battery indicator flashes if battery is low.
    Room temperature display.
    Power on.
    Volume control. (This does not control the volume of the baby’s sound) 7a) increase 7b) decrease
    Microphone.
    Mains adaptor input socket.
    Battery compartment takes 4 x AA batteries (not included). Remove casing using a screwdriver.
    Thermometer sensor.

    Mains power on/off/menu scroll back.
    Volume Control. 13a) increase 13b) decrease.
    Nightlight control - low, medium, high.
    Menu/ok.
    Power on light.
    Talkback button.
    Microphone.

    17

    2

    13a

    14

    13b

    15
    16
    18

    12

    parent unit docking station
    19 Charging indicator.
    20 Mains adaptor input socket.

    20

    19
    parent unit icons

    4

    5

    High

    NIGHT LIGHT

    3
    2

    6

    1

    7a
    7b
    8
    9

    Medium

    2

    Low

    1

    SPEAKER OFF
    Degree
    Celsius
    Fahrenheit

    TEMPERATURE

    BATTERY

    ON

    Empty and needs to be recharged
    1/3 Battery Level
    2/3 Battery Level

    10
    position
    for lead

    11

    3

    |

    Full Battery Level

    SIGNAL STRENGTH

    Signal obtained
    Signal weak
    Signal good
    Signal excellent



  • Page 4

    charging your monitor before first use:

    setting up your parent unit

    THE PARENT UNIT:
    1 The parent unit is supplied with rechargeable batteries 2 x AAA (LR3) that should be inserted before use.
    2 To insert batteries, open the battery casing with a screwdriver. Insert the supplied 2 x AAA (LR3)
    rechargeable batteries. Take extra care to ensure that the batteries are inserted correctly and the right
    way round. Refit the battery casing securely with a screwdriver.
    3 DO NOT use non-rechargeable batteries.
    4 Place the parent unit on the docking station and recharge for 10 hours before use.
    5 The charging icon on the LCD will show the charging status.
    6 Turn on the parent unit by pressing the POWER key (12) for 3 seconds.
    7 The docking station will light red to show that the parent unit is securely docked on the station and
    connection is good.
    8 Turn off the parent unit by pressing the power key (12) for 5 seconds.
    THE BABY UNIT:
    1 The baby unit does not require batteries if powered from the mains.
    2 If mains usage is not available, the baby unit will operate on batteries 4 x AA (LR6), which are not supplied.
    3 To insert batteries, open the battery casing with a screwdriver. Insert 4 x AA (LR6) batteries (rechargeable
    or non-rechargeable, but not mixed) and close casing securely with screwdriver. Take extra care to
    ensure that the batteries are inserted correctly and the right way round.
    4 There is NO charging function on the baby unit for rechargeable batteries.
    5 The screen will illuminate on the baby unit when switched on.
    6 The battery icons will indicate if the battery is low.
    7 Battery power is disconnected automatically when the mains adaptor is in use. If the adaptor is turned
    off at the mains and still remains connected to the monitor then the batteries will be automatically activated.
    8 When the baby unit is connected to the power supply, the LCD backlight will be on. With battery power
    only, the LCD backlight will last only approx. 20 seconds.
    9 Turn on the baby unit by pressing the POWER key (1).

    1 Connect the mains adaptor into a nearby wall socket.
    2 Press and hold (12) for 3 seconds until the LCD/Power LED illuminates.
    3 A link will now be made between the parent unit and baby unit.

    testing the parent unit


    First ensure that the baby unit has been set up and is working
    correctly following the previous instructions.
    • To test the parent unit you must ensure that it is at least 5 metres
    away from the baby unit.
    • Place a sound source such as a radio in the nursery at least 1 to
    1.5 metres away from the baby unit, close the nursery door and
    go to another room.
    • Set up the parent unit in the docking station.
    • Turn on the power (12) and adjust the volume up (13a) or down
    12
    (13b) to a comfortable level.
    • You will hear sounds from your nursery and some of the sound
    lights (A-E) will come on. The louder the sound the more lights
    will come on.
    • Lift the parent unit from the docking station and walk around
    your house and garden, ensuring that you can hear the sounds
    from the baby unit at all times. The monitor will work up to a distance range of 300 metres
    approximately. Depending on the surrounding conditions as well as spatial and structural factors, the
    range may be reduced. The range indoors is normally less than outdoors.
    If you lose the signal from the baby unit an alert tone will be emitted from the parent unit every 10
    seconds and the LCD will flash until the link is restored. The LCD will show 'No Link'. If this
    happens, move closer to the baby unit.
    2



    WARNING about using the baby unit!



    !

    The baby unit should be 1 to 1.5 metres away from the baby’s cot on a flat surface.
    Never place the baby unit in the baby’s cot.

    correct use of batteries








    Non-rechargeable batteries are not to be recharged.
    Rechargeable batteries are to be removed from the baby unit before being charged.
    Rechargeable batteries are only to be charged under adult supervision.
    Different types of batteries or new and used batteries
    are not to be mixed.

    Only batteries of the same or equivalent type as
    recommended are to be used.

    Batteries are to be inserted with the correct polarity.

    Exhausted batteries are to be removed from the
    monitor.

    CAUTION: risk of severe malfunction if battery is
    replaced by an incorrect type. Dispose of used
    batteries according to the instructions.










    setting up your baby unit
    1 Connect the mains adaptor into a nearby wall socket

    in your baby’s nursery and switch on the power at
    the mains.
    2 Press and hold (1) for 3 seconds until the LCD/Power
    LED illuminates.



    1



    WARNING about the danger of cords:

    STRANGULATION HAZARD! - Keep cords out of the reach of children.
    Do not use with an extension cord.
    Check immediately the location of corded monitors to make sure cords are out of arm’s reach of your
    baby and other young children.
    Place cords more than a metre away from any part of the cot. The monitor must not be used in any other
    sleep environment.
    Check the location of the monitor periodically, as what is within arm’s reach to a baby will change as the
    baby grows.
    Make sure the sensor cords are taut and not dangling to reduce the strangulation hazard.
    Do not place furniture or other obstructions on the adaptor cords and be sure to posistion them so that
    nobody can trip over them.
    Keep adaptor cords away from hot surfaces such as radiators and central heating pipes.
    Be careful not to posistion the adaptor where a child might try to step on it.
    Never use Tommee Tippee monitor adaptors with any other equipment. Nor should you use any other
    adaptors with your Tommee Tippee monitor.
    S004LB0600045 or S004LV0600045
    MODEL
    Please note that the adaptors become warm
    in use - this is quite normal and not a hazard.
    The adaptors convert your AC power to safe
    low DC voltage.
    Use the power adaptor provided.

    Input

    100 - 240V~ 50/60Hz 150mA

    Output

    6V - 450mA



  • Page 5

    adjusting the sound sensitivity settings of the baby unit:


    The sound sensitivity settings of the baby unit can be changed only when parent unit is linked with
    the baby unit.

    TO CHANGE THE SENSITIVITY SETTINGS:
    a. Press and +/- to go to SENSITIVITY menu in parent unit.
    b. Press and the current sensitivity level is displayed.
    c. Press +/- to adjust the sensitivity level from Level 1 to Level 5

    KEYS

    $#

    LCD DISPLAY

    EXPLANATION

    level

    level 5

    level

    level 4

    level

    level 3

    level

    level 2

    level

    level 1

    TO CHANGE VOLUME LEVEL:
    1 Press + (13a) to increase the speaker volume level (Level 1 to Level 5 and OFF).
    2 Press - (13b) to lower the speaker volume level (Level 1 to Level 5 and OFF).

    KEYS

    $#

    KEYS

    $#

    LCD DISPLAY
    volume
    volume

    volume
    volume
    volume
    volume

    The new volume level is shown on the display for 2s then saved.
    A warning tone is emitted on attaining the maximum or minimum volume level.

    changing volume of baby unit from parent unit
    1 Press

    (15) and +/- to go to BABY VOLUME menu in parent unit.
    and the current Volume level is displayed. If volume is not changed within 2 seconds,
    it will go back to idle.
    3 Press +/- to adjust the Volume level from Level 1 to Level 5
    4 Press to confirm the settings.
    5 "SAVED" will display temporarily.
    2 Press

    changing the baby unit volume

    TO CHANGE VOLUME LEVEL:
    1 Press + (7a) to increase the speaker volume level (Level 1 to Level 5).
    2 Press - (7b) to lower the speaker volume level (Level 1 to Level 5). There is no volume off option on
    the baby unit.

    volume

    volume off

    d. Press to confirm the settings.
    e. "SAVED" will display and back to previous screen.

    The baby unit volume is pre set to level 3. Changing the volume will affect the loudness of voice from the
    parent unit and the talkback mode.

    LCD DISPLAY

    using the nightlight
    1 To turn on the nightlight, press key (14) on parent unit and (2) on baby unit.
    2 To adjust the brightness or turn it off, press the key again with the sequence L>M>H>Off.
    3 If operating the baby unit on batteries the brightness of the nightlight is limited to the lowest level to

    conserve energy. In battery mode, both the parent unit and the baby unit will have the key sequence
    L>Off.
    4 The nightlight on the baby unit operates even if the parent unit is out of battery or turned off.
    5 Nightlight settings and the corresponding icons are synchronized between baby unit and parent unit if
    they are connected successfully.
    6 The nightlight fades out after 5 minutes in battery mode.

    volume
    volume
    volume

    The new volume level is shown on the display for 2 seconds then saved.
    A warning tone is emitted on attaining the maximum or minimum volume level.

    changing the parent unit volume
    The parent unit volume is set to level 3. Changing the volume will affect the loudness of voice from the
    baby unit, so when volume is off there will be no sound from the baby unit.

    HELPFUL ADVICE ABOUT USING THE NIGHTLIGHT


    You may find it useful to use a lower brightness if you wish your baby not to sleep in complete
    darkness and then adjust to a higher brightness for when baby needs attention during the night
    and you do not wish to turn on the main bedroom lights.



  • Page 6

    using talkback
    Talkback allows you to communicate from the parent unit to the baby unit.
    1 To use talkback press SIDE button (20) on parent unit and hold. The parent unit screen will show TALK.
    2 The audio from baby unit will be muted and the parent will not be able to hear the baby until the
    SIDE button has been released.
    3 If the volume of parent unit is set to OFF during TALKBACK, volume will be changed to default
    volume level (medium).

    paging to locate the parent unit
    1 If both Up + (7a) and Down – (7b) keys are pressed for 3 seconds on the baby unit at

    to reset settings to default
    and +/- to go to Reset menu.
    and "CONFIRM?" is displayed.
    3 Press to confirm reset or press
    to ignore the reset request and back to previous
    menu level.
    1 Press

    2 Press

    GENERAL SAFETY INFORMATION:



    Make sure you store your monitor in a safe place when not in use, away from heat and water.
    Take care not to drop either unit as this may affect the functioning of you monitor.

    the same time, the paging tone is emitted.
    2 Both parent unit and baby unit will display "PAGING" on the LCD.
    3 If volume is OFF before paging start, reset it to default volume level (medium).

    correct disposal of this product

    4 During paging, any key pressed on the parent unit or baby unit will stop the paging tone.
    5 If the link is lost between the parent unit and the baby unit, the paging tone will not be emitted when

    both Up + (7a) and Down – (7b) keys are pressed together. There will be no change on baby unit.
    6 If paging is not stopped, it will expire in 2 minutes.

    the room temperature display
    The temperature surrounding the baby unit will be displayed on both the baby unit and the parent unit
    between 10°C and 30°C. Both PU and BU will state LO below 10°C and HI above 30°C. To ensure accuracy
    of the temperature display, do not position the baby unit in direct sunlight or near a source of heat.

    selecting CELSIUS or FAHRENHEIT:
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. 6
    7. 7
    8. 8

    The monitor is preset to measure temperature in CELSIUS.
    To change this setting press (15) to access main menu.
    Press +/- to select FORMAT then press
    Press +/- to select CELSIUS or FAHRENHEIT.
    Press to confirm.
    "SAVED" will display and back to previous screen.
    Both parent unit and baby unit will change to the temperature format selected.
    Temperature format in baby unit and parent unit will be synchronized automatically when parent
    unit is linked with baby unit.

    selecting a different language
    1 The monitor is preset in English.
    2 To change to another language press

    (15) on the parent unit and +/- to go to language menu.
    and the current language is displayed.
    4 Press +/- to select desired language and press to confirm the settings
    5 "SAVED" will display and back to previous screen.
    3 Press

    Information on the disposal for Waste Electrical & Electronic Equipment (WEEE)
    This symbol on the products and accompanying documents means that used electrical and electronic
    products should not be mixed with general household waste. For proper disposal for treatment, recovery
    and recycling, please take these products to designated collection points where they will be accepted on a
    free of charge basis. In some countries you may be able to return your products to your local retailer upon
    the purchase of a new product.
    Disposing of this product correctly will help you save valuable resources and prevent any possible effects on
    human health and the environment, which could otherwise arise from inappropriate waste handling. Please
    contact your local authority for further details of your nearest collection point for WEEE.
    Penalties may be applicable for the incorrect disposal of this product in accordance with national legislation.
    Do not immerse in water.
    This appliance is not intended for use by persons (including children) with reduced physical, sensory or
    mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
    instruction concerning use of the appliance by a person responsible for their safety.
    Warning! Children should be supervised to ensure that they do not play with the appliance
    Keep this instruction sheet for future reference as it includes important information.
    If the supply cord is damaged, it must be replaced by a special cord or assembly available
    from the manufacturer or its service agent.
    WEE/JC0045SY






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tommee Tippee 1082 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Tommee Tippee 1082 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 0,23 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info