Zoom out
Zoom in
Vorherige Seite
1/7
Nächste Seite
This product may be purchased from Connevans Limited secure online store
at www.DeafEquipment.co.uk
DeafEquipment.co.uk
Solutions to improve the quality of life
SSoolluuttiioonnss
ttoo
iimmpprroovvee
tthhee
qquuaalliittyy
ooff
lliiffee
Connevans
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    Connevans

    Solutions to improve the quality of life

    This product may be purchased from Connevans Limited secure online store
    at www.DeafEquipment.co.uk

    DeafEquipment.co.uk
    Solutions to improve the quality of life



  • Page 2

    DECLARATION OF CONFORMITY
    Tomy declare that the Walkabout Classic Advance:

    TUK
    02/05 Rev.2
    Ref No. 1243
    Made in China

    1. Is in compliance with the essential requirements and other relevant provisions
    of European Directive 1999/5/EC.
    2. Has been tested to all essential radio test suites.
    3. Is in conformity with all applicable essential requirements of all applicable EC Directives.
    List of reference standards: EN301489-1, EN301489-3, EN61558-2-6, EN60065, EN50366, EN50371,
    EN300220-1, EN300220-3, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3.
    Permitted countries of use: UK and Eire only
    This declaration is issued under the sole responsibility of Tomy UK Ltd., Totton, Hants, SO40 3SA. ENGLAND.

    Head of Product Integrity

    We are delighted that you have
    chosen the Tomy Walkabout
    Classic Advance to monitor your
    child. It is a high performance
    monitor with advanced unique
    technology specifically
    designed for Tomy Monitors.
    This monitor combines many
    useful features including:
    ɀ 2 way transmission of sound allowing you to talk to your baby as well as listen.

    TECHNICAL SPECIFICATION

    ɀ 4 Channel Selection for clear reception and reduced interference.

    Power Supply: Mains adaptor rating: PRI: 230V 50Hz SEC: 7.5V 200mA 2VA
    Batteries: Parent Unit – 3 x AA (LR6) 1.5v. Baby Unit – 4 x AA (LR6) 1.5v
    Operating Range: 300m* in optimum ‘open field’ conditions.
    Operating Temperature: 0 - 50ºc
    Frequencies – 49.820 – 49.980MHz
    Transmission Power: <10mW.

    ɀ A secure link and privacy feature which prevents others from listening in.
    ɀ Sound-Activated transmission – An option to set your monitor to Sound-Activated
    transmission only (to conserve battery power).
    ɀ Fully portable Parent & Baby Units.
    ɀ Tomy’s original pioneering Moving Light Display - a great addition for monitoring
    with or without sound.

    CUSTOMER CARE INFORMATION

    ɀ A reassuring soft glow Night Light on the Baby Unit which can be remotely
    operated from the Parent Unit.

    Before you call, please read this instruction manual carefully.
    When calling the Tomy Careline, please quote the model number of your Tomy Walkabout Classic
    Advance which is 1243 and the date of purchase:

    __ / __ / __

    Contact us by calling 023 80662600 or by writing to us at TOMY Careline, PO BOX 20, Totton, Hants,
    SO40 3YF or by clicking online at www.tomy.co.uk. Telephone lines open Monday to Friday 9am-5pm,
    some calls may be monitored as part of our ongoing commitment to customer excellence.
    If your monitor requires servicing, please send it to the Tomy Monitor Service Centre which offers a 48
    hour express turnaround service. Tomy Monitor Service Centre, Units 6/9 South Hampshire Ind. Park,
    Brunel Road, Totton, Hampshire, SO40 3SA.
    Please retain your proof of purchase to validate your guarantee. Full details of your guarantee can be
    obtained by contacting the Tomy Careline (details above). Please note your monitor is guaranteed
    against manufacturing defects for two years from the date of purchase. This does not affect your
    statutory rights.

    Tomy UK Ltd., Totton, Hants. S040 3SA, England.
    Please retain for future reference.
    * in optimum ‘open field’ conditions.

    PLEASE READ INSTRUCTIONS CAREFULLY BEFORE
    USE AND RETAIN FOR FUTURE REFERENCE.

    INSTRUCTIONS FOR USE



  • Page 3

    BABY UNIT
    B1
    B2
    B3
    B4
    B5
    B6
    B7

    INDEX

    BABY UNIT
    B1

    POWER/LIGHT Button
    Green Light Power Indicator
    Soft Glow Night Light
    Hanging Slot
    Power Jack Socket
    Battery Compartment
    Sound-Activation Switch

    B1
    B4

    B1

    B5
    B6

    B2

    B7

    POWER/LIGHT Button
    Hanging Slot
    Power Jack Socket
    Battery Compartment
    Sound-Activation Switch

    BEFORE YOU START

    6

    • Safety information
    • Battery safety
    • Caring for your monitor

    B4

    QUICK START

    7

    FEATURES AND FUNCTIONS

    8

    B3

    • Connection Status
    B5

    • Communication Range
    • Channel Selection
    B7
    P1

    • Portable Use

    P1

    • Low Battery Warning

    B6
    P2

    9

    P2

    • Moving Light Display

    P5

    P4

    Fig 2(a)

    • Volume Control

    Fig 2(b)

    P6

    • Sound-Activated Transmission
    P7

    • Night Light

    PARENT UNIT
    P1
    P2
    P3
    P3

    P4
    P5
    P6
    P7
    P8
    P9
    P10

    Fig 1(a)

    POWER/LIGHT Button
    TALK-BACK Button
    TALK-BACK Microphone
    Moving Light Display
    Green Light Power Indicator
    CHANNEL SELECT Button
    Volume Control
    Power Jack Socket
    Battery Compartment
    Belt Clip

    • Talking Back to Your Baby

    PARENT UNIT
    P8
    P1
    P2
    P6
    P7
    P8
    P9
    P10

    POWER/LIGHT Button
    TALK-BACK Button
    CHANNEL SELECT Button
    Volume Control
    Power Jack Socket
    Battery Compartment
    Belt Clip

    10

    • Belt Clip
    • Wall Mounting

    P10

    FREQUENTLY ASKED QUESTIONS

    11

    PROBLEM SOLVING

    12

    DECLARATION OF CONFORMITY

    14

    TECHNICAL SPECIFICATION

    14

    CUSTOMER CARE INFORMATION

    14

    P9

    Fig 1(b)



  • Page 4

    BEFORE YOU START
    SAFETY INFORMATION
    The Tomy Walkabout Classic Advance is designed to help you monitor your child and is not a substitute for
    adult supervision.

    QUICK START
    Please refer to the fold out pages at the front of this booklet for detailed product illustrations; you will find it
    useful to refer to these whilst reading this booklet.
    ɀ Plug in both Units.

    Always keep electrically operated items and their cables out of reach of babies and younger children.

    ɀ Place the Baby Unit within 1metre (3 feet) of your baby ensuring all parts are kept out of reach. Under no
    circumstances should you place any parts of the monitor in or on a cot.

    Under no circumstances should the adaptors supplied with this monitor be used with any other equipment.

    ɀ Ensure both units are more than 2 metres (6 feet) apart.

    No other adaptors than those supplied should be used with your monitor.

    ɀ To activate, press the POWER/LIGHT button B1 P1 on both the Baby Unit and Parent Unit. (IMPORTANT!
    To establish a quicker connection, activate the Baby Unit before the Parent Unit)

    Be careful not to position the adaptor where a child is likely to use it as a step. Putting weight on the
    adaptor whilst it is plugged in could damage the unit or cause injury to your child.
    Under no circumstances should you place any part of your monitor in or on a cot.
    Ensure all wiring is positioned safely so that children cannot become entangled and no trip hazard is
    created.

    ɀ The (Green Light) Power Indicator at the front of both units
    are active.

    B2 P5

    will glow to indicate that both units

    ɀ To turn the Units OFF, press & hold the POWER/LIGHT button on both units for two seconds

    B1 P1

    .

    The chargers may become hot during use – take care when handling, allow heat to disperse. DO NOT
    COVER. Disconnect charger if the product will not be used for several days. To prevent a shock hazard, please
    disconnect from power supply before cleaning.
    Do not attempt to dismantle any part of this product.
    This product is not a toy.

    BATTERY SAFETY
    Take special care to ensure batteries are inserted correctly, observing (+) and (-) marks on battery and
    product. Removal and replacement of batteries should be carried out by an adult or under adult
    supervision. Do not attempt to recharge non-rechargeable batteries.
    Rechargeable batteries must be removed from the monitor before recharging. Removal and recharging of
    rechargeable batteries should be carried out by an adult or under adult supervision. Do not short circuit the
    contacts in the battery compartment or the battery terminals.
    Remove exhausted batteries from product. Do not mix old (used) and new batteries or batteries of different
    types, eg. rechargeable and alkaline or batteries of different makes/brands. Dispose of exhausted batteries
    safely, and never dispose of batteries in a fire. Remove batteries from product after use or if storing for long
    periods. Only use batteries of the same or equivalent type to those recommended.

    CARING FOR YOUR MONITOR
    Do not immerse any parts in liquids.
    Do not place in direct sunlight.
    Periodically examine product for signs of damage to electrical parts and do not use until damage has been
    properly examined.
    Always remove batteries from both units if using the mains adaptors for long periods of time.

    6

    7



  • Page 5

    FEATURES AND FUNCTIONS OF YOUR TOMY
    WALKABOUT CLASSIC ADVANCE
    CONNECTION STATUS
    The Parent and Baby Unit will automatically try to connect to each other upon switching on.
    No Connection
    Should your monitor be unable to establish a connection or should the connection break during
    transmission for a period of more than one minute a continuing beep will sound (through the parent unit)
    until a connection is re-established.To re-establish a connection move the units back within range and if
    necessary change to another channel. Should a connection not be made after 5 minutes the Baby Unit will
    automatically switch off.

    COMMUNICATION RANGE

    LOW BATTERY WARNING
    When the batteries begin to run low in either Unit, the Parent Unit will give an audible and visual alarm
    as follows:
    ɀ 2 Beeps every 40 seconds: Baby Unit low battery (through the Parent Unit).
    ɀ 3 Beeps every 40 seconds: Parent Unit low battery.
    Green Power Light Indicators on both Units
    sequence with the audio alarms.

    B2 P5

    will change colour from green to red and flash in

    NOTE! Audible beeps are only emitted through the Parent Unit to avoid disturbing your baby.

    MOVING LIGHT DISPLAY
    ɀ Tomy’s unique moving light display located on your Parent Unit
    without sound, ideal for those quiet moments.

    P4

    allows you to monitor your baby

    ɀ Your monitor has been carefully designed to operate at its best within a generous 300 metre range*
    (suitable for the majority of household environments).

    ɀ The light display consists of 5 green and 3 red coloured lights, the louder the noise of your baby, the more
    lights will illuminate.

    ɀ Moving the units within 2 metres of each other will result in the parent unit automatically switching to
    mute, to avoid any annoying feedback.

    ɀ The light display is always active whilst your monitor is switched on.

    ɀ The range and general quality of reception may vary depending on battery power and number of
    obstructions such as walls, buildings etc.
    ɀ For best performance we recommend both Units are operated using the mains adaptors supplied.
    ɀ Although this monitor has a range of 300 meters (in optimum conditions) a baby should never be left
    unattended at a distance which could delay prompt adult attention.
    Out of range
    As maximum range is reached, the Parent Unit will automatically switch the speaker to mute (to avoid hearing
    a loud hiss) and the continuous beeping ‘loss of connection’ alarm will sound after 1 minute of no contact.

    VOLUME CONTROL
    ɀ The listening volume through your Parent Unit can be adjusted from levels 0-9, via the VOLUME +/ buttons P7 . Each press will adjust the volume by one step.
    ɀ The Parent Unit will emit a click every time the volume is adjusted.
    ɀ Selecting level 0 will mute the sound, allowing you to monitor using the light display.

    SOUND ACTIVATED TRANSMISSION

    CHANNEL SELECTION
    You can select one of the four channels to give you the best possible sound quality by pressing the
    ‘CHANNEL SELECT’ Button on the Parent Unit P6 , this will synchronise both units to the next channel.
    SECURE & PRIVATE TRANSMISSION
    Unique transmission and scrambled audio between the Parent and Baby Units ensures total privacy.

    PORTABLE USE

    ɀ Your monitor has a Sound-Activated Transmission feature. Once this power saving feature is switched on,
    the Parent Unit will remain silent (no transmission) until your baby stirs.
    ɀ To change between continuous transmission or Sound-Activated Transmission, unscrew the Baby Unit’s
    battery compartment B6 remove any batteries and move the switch B7 to your prefered choice.
    (see image below)

    P9

    B6
    B7

    ɀ The Baby Unit requires 4 x AA (LR6) 1.5v batteries, the Parent Unit requires 3 X AA (LR6) 1.5v batteries.
    Please note; batteries are not included.
    ɀ To insert batteries into either unit unscrew the battery compartment cover B6 P9 and insert the
    required batteries ensuring the ‘+’ & ‘-‘ are positioned correctly (see images opposite). Replace the
    compartment cover; you are now ready for portable use.
    ɀ We recommend the use of disposable alkaline batteries. Rechargeable batteries will give inferior performance.
    ɀ For best performance we recommend both units are operated using the mains adaptors supplied.
    ɀ Always remove batteries from both Units if using the mains adaptors for long periods of time.

    8

    Parent Unit
    Battery Compartment

    Baby Unit Battery Compartment
    and Sound-Activation Switch

    9



  • Page 6

    NIGHT LIGHT
    ɀ The Baby Unit has a reassuring soft glow Night Light B3 , which can be operated by both the Parent and
    Baby Units by pressing the POWER/LIGHT button on either unit B1 P1 . (Note! Holding the POWER/LIGHT
    button for more than 2 seconds will turn your monitor off ).
    ɀ Every time the Night Light is turned ON/OFF via the Parent Unit, an audible click will sound through the
    Parent Unit.

    FREQUENTLY ASKED QUESTIONS
    Q.

    Why do I still get interference even after channel selection has been performed?

    A.

    This could be due to your local environment. Overhead power cables, local radio transmitters, tall
    buildings, similar monitoring/radio equipment operating in your local area may create interference.

    Q.

    Where can I obtain spare and replacement parts for my Tomy Walkabout Classic Advance?

    A.

    Spare and replacement parts are available from our Careline; please refer to the customer care section within
    these instructions for contact details.

    Q.

    My monitor does not appear to have the required range?

    A.

    The Walkabout Classic Advance is designed to have a range of approximately 300 metres in optimum (open
    field) conditions. Environmental obstructions such as overhead power cables, local radio transmitters, tall
    buildings etc may reduce the range. For best performance we recommend operating your monitor using the
    mains adaptors supplied. If problem persists please contact the Tomy Careline.

    ɀ If powering the Baby Unit with the use of batteries, the Night Light function will fade out after 5 minutes,
    otherwise the Night Light will remain illuminated until switched off.

    TALKING BACK TO YOUR BABY
    ɀ The Talk-Back function allows you to talk to and reassure your baby by transmitting sound from your
    Parent Unit to the Baby Unit
    ɀ Press and hold the TALK button P2 , and speak clearly into the Parent Unit’s microphone P3 . It is
    important that the button is held down whilst talking. (Note: Normal monitoring will be temporarily
    suspended whilst using Talk-Back).
    TALK-BACK volume
    ɀ To adjust the Talk-Back volume press and hold the TALK button P2 with VOLUME +/– P7 .
    The Talk-Back volume can be adjusted from levels 1-9; each press will adjust the volume by one step. The
    Parent Unit will emit a click every time the volume is adjusted.

    BELT CLIP
    ɀ Attach the Parent Unit to a belt or clothing using the clip at the back of
    the Unit P10 .

    WALL MOUNTING
    ɀ The Baby Unit can be mounted on a wall using the hanging slot on the
    reverse of the unit B4 . Ensure that the unit is safe and secure out of a child’s
    reach and away from the cot.

    Belt Clip

    P10

    ɀ Ensure all wiring is made safe and is fixed so that children cannot become
    entangled and that no trip hazard is created.

    10

    11



  • Page 7

    PROBLEM SOLVING
    If a fault occurs, please check the points listed below. If you are unable to rectify the problem yourself,
    please contact our Careline.
    PROBLEM

    POSSIBLE CAUSE

    SOLUTION

    No sound coming through
    your Parent Unit.

    ɀ Units are less than 2 metres apart.
    ɀ Batteries incorrectly inserted.
    ɀ Batteries running low.
    ɀ Adaptor not connected or connected incorrectly.
    ɀ Volume on Parent Unit is set too low.
    ɀ Unit is out of range.

    ɀ Move Units further apart.
    ɀ Check batteries’ polarity.
    ɀ Check and/or replace batteries.
    ɀ Check adaptor connection.
    ɀ Increase Parent Unit volume.
    ɀ Move units closer.

    8
    8
    8

    Parent Unit remains silent or
    only becomes active
    intermittently.

    ɀ Units are set to Sound-Activated transmission.

    ɀ Refer to Sound-Activated transmission within this instruction leaflet to switch
    units to continuous transmission.

    9

    No electrical function –
    Parent Unit

    ɀ Batteries inserted incorrectly.
    ɀ Batteries running low.
    ɀ Adaptor not connected or connected incorrectly.

    ɀ Check batteries polarity.
    ɀ Check and/or replace batteries.
    ɀ Check adaptor connection.

    8
    8

    No electrical function –
    Baby Unit

    ɀ Batteries are inserted incorrectly.
    ɀ Batteries have run down.
    ɀ Adaptor not connected or connected incorrectly.

    ɀ Check batteries’ polarity.
    ɀ Check and/or replace batteries.
    ɀ Check adaptor connection.

    8
    8

    Poor reception/interference

    ɀ Parent and Baby Units are too far apart.
    ɀ Local interference from other devices.
    ɀ Batteries are low or dead.

    ɀ Move Units closer.
    ɀ Press ‘CHANNEL SELECT’ to change to another frequency.
    ɀ Replace batteries or power via the mains.

    8
    8
    8

    High pitched noise

    ɀ Units are too close together.
    ɀ Volume too high.

    ɀ Move Units apart.
    ɀ Decrease volume.

    8
    9

    Sound-Activated transmission
    will not activate

    ɀ Sound-Activated transmission has not been activated despite moving
    the switch.

    ɀ Turn both Parent and Baby Units OFF and back ON to activate.

    9

    Night Light does not work

    ɀ Night Light not switched on.

    ɀ Turn Night Light on.

    10

    ɀ Check and/or replace batteries or power via mains operation.
    ɀ The Night Light is designed to switch off automatically after 5 minutes to conserve battery life.
    ɀ The Night Light is designed to remain active until switched off.

    8
    10
    10

    ɀ Batteries have run down.
    Night Light keeps switching OFF ɀ Powering the Baby Unit via the batteries.
    Night Light stays constantly ON ɀ Powering the Baby Unit via the mains.
    and will not fade out.

    12

    PAGE

    9
    8

    Talk-Back not functioning

    ɀ You are not holding the TALK button throughout Talk-Back.
    ɀ Talk volume set too low.

    ɀ Hold TALK button continuously whilst talking.
    ɀ Adjust the Talk-Back volume, to a higher level.

    10
    10

    Unable to adjust the Talk
    Back volume

    ɀ You are not holding the TALK button at the same time as adjusting
    the volume controls.

    ɀ Hold the TALK button and adjust volume.

    10

    13






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tomy Walkabout Classic Advance wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Tomy Walkabout Classic Advance in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 0,27 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info