483914
4
Zoom out
Zoom in
Vorherige Seite
1/66
Nächste Seite
4 Topcom Deskmaster 4100
Topcom Deskmaster 4100
6.2 Set the area code
When you have a subscription to the caller ID
service it can be necessary in some countries to
enter your area code. When the telephone re-
ceives a caller ID it will remove the entered area
code from the incoming number.
Press to enter the menu
Use / to select “
6(7&RG(
Press to enter the area code settings
Use / to change
Press to move to the next digit.
6.3 Set the LCD contrast
There are 8 levels of LCD contrast (0..7). Choose
the most convenient level.
Press to enter the menu
Use / to select “
6(7/FG
Press to enter the LCD contrast settings
Use / to select the level
Press to confirm
You can also access the LCD-contrast settings,
just by pressing the R/LCD key
6.4 Set the PBX code
When your phone is connected to a PBX system
you can enter the PBX line access code.
The line access code will be added when dialling
out a number from the caller ID list.
Press to enter the menu
Use / to select “SET 4 PcodE”
Press to enter the settings
Use / to change select the digit
Press to move to the next digit
6.5 Select PULSE or TONE dialling
By default, the telephone is set for Tone dialling
(DTMF). Some old lines require pulse dialling.
Press to enter the menu
Use / to select “
6(73W
Press to enter the Pulse/Tone settings
Use / to select ‘toNE’ or ‘PULSE’
Press to confirm
6.6 Set the flash time
The R/LCD-key (flash) is used for services like
“Call waiting” (if this service is provided by your
telephone company) or to transfer calls when the
telephone is connected to a PBX-system.
Depending on the country, this flash-time can be
different.
The telephone supports 4 possibilities : 100, 300,
600 and 1000 msec.
Press to enter the menu
Use / to select “SET 6 FLASH”
Press to enter the FLASH settings
Use / to select your flash-time
Press to confirm
6.7 Ringer volume
At the back panel of the telephone you find a
switch that can be set in three positions : off, low
and high.
Choose the most comfortable volume setting
6.8 Anti-dialling from parallel line
You can prevent that other telephones, connected
to your line, can make a call.
When this function is activated you will be alarmed
when someone tries to make a call with another
telephone connected to your line.
Press and hold # for three seconds
“SPI oFF” appears
Press # again to activate “SPI on”
Press to confirm
Follow the same procedure to deactivate this
function (“SPI oFF”)
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Topcom DESKMASTER 4100 - TE 6601 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info