640724

Topcom KS-4240 BABYVIEWER Seite 6

6
Zoom out
Zoom in
Vorherige Seite
1/98
Nächste Seite
Babytalker 3500 SEDS
6
®
10.11 Playing a lullaby
There are 5 pre-programmed lullabies that you can play on the
baby unit.
– To play the currently selected lullaby or stop playback,
press the music button on the baby unit.
– To select a different lullaby, repeatedly press the up
button or down button until the desired
lullaby is selected. The lullaby icon will display the
selected lullaby (1 to 5).
– Press the on/off button when the desired lullaby
is selected.
10.12 Switching the night light on and off
– Press the menu button 5 times. The night light
icon is displayed.
– Press the up or down button to switch
the night light “ON” (night light is on) or “OFF”.
– Press the menu button to confirm.
– After 10 seconds the parent unit will switch back to
monitor mode.
10.13 Voice activated transmission (VOX)
During night and to save energy, the KS-4240 can be set in VOX
mode.
In VOX mode, the display will be activated as soon as the
microphone of the baby unit will capture sound.
You can set the sound detection sensitivity (VOX) of the
babyphone. If the sensitivity is set to high, the baby unit will pick
up weaker sounds.
– Press button 6 times. “VOX” is displayed.
– Repeatedly press button or to set the
VOX sensitivity.
– To switch off VOX mode, select “OFF”.
– Press the menu button to confirm.
10.14 Night vision
The camera has 6 high-intensity LED’s for picking up clear images
in the dark. When the build in light sensor measures the
ambient light level as low, the LED’s will automatically activate.
10.15 Registering the parent unit with the baby unit
or register a new camera.
Up to 4 baby units can be registered to one parent unit.
To re-register your baby unit, or register a new baby unit, follow
the procedure below:
– Switch on the parent unit
– On monitor mode, press and hold camera button
for 5 seconds, it will go to registration mode.
– After registration icon comes out, pthe up button
or down button to select the camera
channel [C1] or [C2] or [C3] or [C4] that you want the
baby unit to pair with.
– Press and release the menu button to confirm
which camera number to be registered.
– The Link LED then flashes rapidly for 10 seconds.
– Switch the baby unit ON. Press the pair button once
(at the back of the camera).
– If registration is completed, camera video appears on
LCD screen and return to normal mode. Baby unit will
return to normal mode too.
– If the registration time is expired or registration is failed,
“Out of Range” appears on LCD.
NOTE: If a particular channel had been registered already,
register this particular channel again will over-write the old
registration.
10.16 Selecting the camera
When more than 1 camera is registered.
On monitor mode:
– Press the camera button briefly. The camera
number is displayed.
– Press the camera button again to select another
camera or select ‘SCAN’. In scan mode, each camera
image will be displayed sequentially.
If only one camera registered, a short press on the camera button
will have no response!
11 Cleaning and maintenance
This section contains important instructions for cleaning and
maintaining the equipment.
Follow these instructions to ensure trouble-free use and prevent
damage to the equipment due to improper maintenance.
11.1 Safety Instructions
11.2 Cleaning
– Clean the equipment with a soft, slightly dampened
cloth.
– Clean soiled connectors and contacts with a soft brush.
– Clean the battery contacts and battery compartment with
a dry, lint-free cloth.
– If the equipment gets wet, switch it off and remove the
batteries immediately. Wipe the battery compartment dry
with a soft cloth in order to minimize potential water
damage. Leave the battery compartment open until it is
completely dry. Do not use the equipment before it is
completely dry.
11.3 Maintenance
– Check the batteries (regular or rechargeable) in the
equipment regularly and replace them when necessary.
– Check the connectors and cables for defects.
12 Troubleshooting
This section provides important instructions for localising and
correcting problems.
Follow these instructions in order to avoid hazards and damage.
12.1 Safety Instructions
The VOX sensitivity is indicated by a black bar on
the display:
- high sensitivity
- low sensitivity
The image changes automatically into black and
white mode under the night vision mode.
18
16
17
25
23
16 17
2
23
23
16
17
23
9
19
16
17
23
21
10
DANGER
Risk of fatal injury due to electric shock!
• Before cleaning the equipment, switch it off and
unplug the power cable from the mains receptacle.
CAUTION
Risk due to leaking battery fluid
Fluid from leaking batteries (regular or rechargeable) can
cause injuries (skin irritation) or damage to the equipment.
Wear safety gloves.
CAUTION
• Do not use cleaning products or solvents. They can
damage the case or seep into the equipment and
cause permanent damage.
CAUTION
• If you suspect that the equipment is damaged, always
have it checked by an expert before using it again.
DANGER
Risk of fatal injury due to electric shock!
• Unplug the power cable before attempting to correct a
problem.
19
19
19
… 6 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

topcom-ks-4240-babyviewer

Suche zurücksetzen

  • Kann die beide Geräte nicht mit ein ander verbinden Eingereicht am 3-1-2020 12:36

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Topcom KS-4240 BABYVIEWER wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info