Bedienungsanleitung Topcom KS-4249 (Seite 5 von 62) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Alle Sprachen)

719680

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Babyviewer - KS-4248 KS-4249

ENGLISH

10 Operation and use

10.1 Switching the baby unit and parent unit on

and off

– Press and hold the on/off button to switch on the

is activated.

– Slide the on/off switch up to switch on the baby

unit. The on/off LED is activated.

to switch off the parent

unit (press and hold until the display goes blank).

– Slide the on/off switch down to switch off the

baby unit.

–

10.2 Checking the connection between the parent

unit and the baby unit

You should always check the wireless connection when you use

the babyphone for the first time.

– Put the parent unit in the same room as the baby unit,

separated by at least two meters.

– Switch on both devices. The parent unit will try to

establish a connection with the baby unit.

– The display of the parent unit will show the captured

image from the baby unit after the connection has been

established (monitor mode).

– The sounds picked up by the microphone are

reproduced by the parent unit.

– The volume of the reproduced sound is indicated by the

volume LED’s at the top of the parent unit.

The higher the volume, the more LED’s are on.

– If no connection is established, “OUT OF RANGE” is

displayed.

10.3 Out of range indication

The maximum range between the parent- and baby unit is 300

meter in open area. Different factors, such as bricks and plaster

walls, will reduce the range. Moreover, reinforced concrete floors

will influence the range tremendously.

In a residence, normal operating range is up to 50 meters and 2

floors.

– If the connection is interrupted, “OUT OF RANGE” is

displayed.

– Reduce the distance between the parent and baby units

until a new connection is established.

10.4 Setting the reproduction volume of the

parent unit

There are 5 volume levels.

to increase the volume.

to decrease the volume.

10.5 Setting the parent unit display brightness

There are 5 brightness levels. When the display is on:

– Press button to increase the brightness.

– Press button to decrease the brightness.

10.6 Temperature indication

When the display is on, the baby’s room temperature is displayed

in the top right corner.

10.7 Temperature alert

You can set a high/low temperature alert, the unit will give beep

when the temperate will go beyond the preset range.

Use the arrow keys to highlight items, and use the menu

button to confirm your selection. Use the On/Off

button to go back one step.

– Enter the temperature menu to turn the temperature

alert function on or off.

– Use the arrow keys to set the lowest temperature

between 5°C and 24°C

– Next, use the arrow keys to set the highest temperature

between 25°C and 40°C

10.8 Zoom function

The parent unit has X2 zoom digital view function.

– When parent unit in X1 viewing mode, press and hold

the up button for 2 seconds,

– The live viewing area will change to X2 zoom mode

immediately.

– Press and hold the down button to go back to X1

zoom.

10.9 Talking with your baby

You can use the parent unit to talk with your baby.

– Press the Talk button on the parent unit and hold

it pressed.

– Hold the parent unit vertical with the microphone

approximately 10 cm from your mouth, and speak into

the microphone.

– Release button when you have finished talking.

10.10 Playing a lullaby

There are 5 pre-programmed lullabies that you can play on the

baby unit.

– Go to the main menu with the menu button and

enter the lullaby menu. You can turn the lullaby on or off

in this menu.

– To select a different lullaby, enter the songs menu and

select on of the 5 lullabies.with the menu button .

10.11 Switching the night light on and off

– Go to the main menu with the menu button and

enter the night light menu. You can turn the night light on

or off in this menu.

10.12 Voice activated transmission (VOX)

During night and to save energy, the babyviewer can be set in

VOX mode.

In VOX mode, the display will be activated as soon as the

microphone of the baby unit will capture sound.

You can set the sound detection sensitivity (VOX) of the

babyphone. If the sensitivity is set to high, the baby unit will pick

up weaker sounds.

– Press the menu button to enter the main menu.

Use the arrow keys to highlight items, and use the menu

CAUTION

Do not place the camera and wires within the baby’s reach!

Fix the camera at least 1 meter away from the baby.

The parent unit will try to establish a connection

with the baby unit. If captured image from the

camera is displayed, a connection has been

established.

224

parent unit. The display

– Press the on/off button

Allow your baby to get used to the talk function

before you use it in practice.

– Press button

– P

ess the m

enu button

enter the main menu.

2316

2317

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom KS-4249 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info