Bedienungsanleitung Topcom Twintalker 6000 (Seite 1 von 24) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

462260

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

TwinTalker 6000

User Guide

U8006155/1

1. DESCRIPTION

(see front cover)

2. INSTALLATION

2.1. Removing/Installing the Belt Clip

1. To remove the clip from the unit, push up on the belt clip (2) while pulling

the clip tab (1).

2. When re-installing the belt clip, a click indicates the BeltClip is locked into

position.

2.2. Battery Installation

1. Remove the belt clip (2).

2. Pull the Battery Cover Tab (4) and remove the Battery Cover (3).

3. Install the battery Pack.

Ensure the metal contacts on the site of the battery are facing outwards from

the radio to connect with the contact on the battery door.

4. Re-install the Battery Cover (3) and Belt Clip (2).

Note: Instead of the supplied battery pack, the TT6000 can be used with

3xAAA standard rechargeable batteries. Follow the polarity as shown when

installing. You are not able to use the desktop charger with standard recharge-

able AAA batteries installed

Important :

Dispose of the batteries at a designated battery disposal unit and not in

the household waste.

Remove the batteries when you do not use your radio for a longer period.

Do not try to diassemble the battery pack.

Do not shortcircuit & dispose of in ﬁre.

1. Microphone

2. Monitor button

3. Talk button

4. Call button

5. Ear/mic/connector

6. Antenna

7. LCD display

8. Up/Down button

9. Menu/Lock button

10.On/Off button

11.Scan button

12.Speaker

2.3. Desktop charger

The desktop charger provides drop-in charging conveniency

1. Put the desktop charger on a ﬂat surface.

2. Plug one end of the supplied adapter into the electric socket and the other

end into the connector on the backside of the desktop charger.

3. Put the radio in the charger as indicated.

4. The charging LED will turn on if it’s properly inserted and charging.

5. It will take about 8 to 10 hours to fully charge the batteries

3. LCD SCREEN

a. RX icon. Displayed when receiving a signal.

b. TX icon. Displayed when transmitting a signal.

c. Displays the current VOLUME LEVEL.

d. CTCSS code. Changes from 1 to 38 as

selected by user.

e. Displayed during the CHANNEL SCAN mode.

f. Displays during the VOX mode.

g. Button lock symbol

h. The current battery level charge.

i. Channel number. Changes from 1-8 as

selected by user.

4. GETTING STARTED

4.1. Turning the Unit ON/OFF

To activate; press and hold the POWER button . The unit will “beep” and the

LCD Screen will display the current channel.

To switch off; press and hold the POWER button again. The unit will “beep”

and the LCD Screen will turn blank.

hgec

id a

4.2. Adjusting Speaker Volume.

The Speaker Volume can be adjusted using the up /down key . The

Speaker Volume level is displayed on the LCD(see §3)

4.3. Receiving a Signal

The unit is continuously in the RECEIVE mode when the unit is ON and not

transmitting. When you receive a signal on the current channel, the RX icon is

displayed (see §3)

4.4. Transmitting a Signal

1. Press and hold the TALK button to TRANSMIT. The TX icon will be

displayed

2. Hold the unit in a vertical position with the MICROPHONE 5 cm from the

mouth and speak into the microphone.

3. Release the TALK button when you have ﬁnished transmitting.

NOTE: To check the channel activity; press and hold the MONITOR button.

You’ll hear static if the channel is unoccupied. Don’t TRANSMIT if someone is

talking on the channel.

IMPORTANT: In order for other people to receive your transmission, they must

also be on the same channel and have set the CTCSS code you are currently

using. Refer to the ‘Changing Channels’

5. OPERATION

5.1. Changing Channels

The PMRS has 8 available channels.

To change channels:

1. Press the MENU button once, the current channel number ﬂashes on

the LCD Screen.

2. Press the UP or DOWN button to change the channel.

3. Press the MENU button to conﬁrm the channel selection and go to

CTCSS SUB-CHANNEL SELECTION mode, or press the TALK button to

select the desired channel and return to NORMAL mode.

5.2. CTCSS (Continuous Tone Coded Squelch System)

The 2 digit CTCSS code corresponds to a speciﬁc tone frequency the radio

emits. Two users, with the same channel and CTCSS set can hear one

another.They will not

be able to hear anyone else on the channel unless the

other radios have the same exact CTCSS code enabled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Topcom Twintalker 6000 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info