Bedienungsanleitung Toshiba e-STUDIO305CP (Seite 1 von 11) (Englisch)

804431

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

Quick Reference

Learning about the printer

Using the printer control panel

Use the To

1Display •Show the status of the printer.

•Set up and operate the printer.

2Home button Go to the home screen.

3Keypad Enter numbers, letters, or symbols on the

printer.

4Sleep button Enable Sleep mode or Hibernate mode.

Notes:

•Pressing any hard button, touching the

printer control panel, attaching a device to

a USB port, sending a print job, or

performing a power-on reset with the

main power switch wakes the printer from

Sleep mode.

•Pressing the Sleep button or the power

switch causes the printer to wake from

Hibernate Mode.

5Stop or

Cancel

button

Stop all printer activity.

Use the To

6Indicator

light

Check the status of the printer.

7USB port Connect a USB a flash drive to the printer.

Note: Only the front USB port supports flash

drives.

Understanding the colors of the Sleep

button and indicator lights

The colors of the Sleep button and indicator lights on the printer control

panel signify a certain printer status or condition.

Indicator light Printer status

Off The printer is off or in Hibernate mode.

Blinking green The printer is warming up, processing data,

or printing.

Solid green The printer is on, but idle.

Blinking red The printer requires user intervention.

Sleep button light Printer status

Off The printer is off, idle or in Ready state.

Solid amber The printer is in Sleep mode.

Blinking amber The printer is entering or waking from

Hibernate mode.

Blinking amber for 0.1

second, then goes

completely off for 1.9

seconds in a slow, pulsing

pattern

The printer is in Hibernate mode.

Understanding the home screen

When the printer is turned on, the display shows a basic screen,

referred to as the home screen. Use the home screen buttons and icons

to initiate an action.

Note: Your home screen may vary depending on your home screen

customization settings, administrative setup, and active embedded

solutions.

Touch To

1Change Language Change the primary language of the printer.

2Bookmarks Create, organize, and save a set of

bookmarks (URLs) into a tree view of folders

and file links.

Note: The tree view does not include

bookmarks created within Forms and

Favorites, and the ones in the tree are not

usable in Forms and Favorites.

3Held Jobs Display all current held jobs.

4USB View, select, or print photos and documents

from a flash drive.

Note: This icon appears only when you

return to the home screen while a

memory card or flash drive is connected to

the printer.

5Menus Access printer menus.

Note: These menus are available only

when the printer is in ready state.

6Status message

bar

•Show the current printer status such as

Ready or Busy.

•Show the status of printer supplies.

•Show intervention messages and the

instructions on how to clear them.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba e-STUDIO305CP Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Toshiba e-STUDIO305CP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info