Bedienungsanleitung Toshiba RDXV59 (Seite 35 von 84) (Englisch)

465047

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Introduction Connections Playback Editing OthersFunction SetupRecording VHS Functions

Basic Setup /

TV View Operation

You can deactivate the periodical (Daily, Mon-Fri or Weekly)

timer recording temporarily.

1 In stop mode, press [TIMER PROG.].

2 Select the periodical timer recording

programme you want to skip using [K \ L], then

press [ENTER\OK].

3 Select “Programme Change” using [K \ L], then

press [ENTER\OK].

4 Move the cursor to the “Skip” field using

[{ \ B], then select “ON” using [K \ L] and

then press [ENTER\OK] to activate the setting.

• “✔” will be displayed on the left side of the timer

programme.

• The setting will go back to “OFF” after the programme is

skipped once.

On the front panel:

Press [STOP C].

On the remote control:

1Press [STOPC].

2 Select “Yes” using [K \ L], then press

[ENTER\OK].

The error number appears on “Timer Programming” list.

The error programme will be displayed in gray with an error

number.

The error numbers indicate:

• Timer programme with an error number will be cleared once

the entry screen for the programme is displayed.

• If there is a power failure or the unit is unplugged for more

than 30 seconds, the clock setting and all timer settings will

be lost.

• If a disc is not inserted or if a inserted disc is not recordable

(finalised DVD-RW/-R, finalised DVD+R, a fully recorded

disc, etc.), the unit will perform the alternate recording to the

HDD. (See page 34.)

• When a timer recording is completed, the unit will ask you

whether to turn off the unit if there is no timer recording which

starts within 4 minutes, except under conditions listed below.

- During playback of HDD or DVD.

- While displaying menus or information on the screen.

The unit will be turned off automatically if you select “Yes” or

if you do not reply in 1 minute.

• When the programmed starting and ending time are earlier

than the current time, the setting will not be accepted.

• The audio language which is selected in the “DVB Setting”

will be recorded for digital TV broadcasting.

• Timer recording whose recording time exceeds 12 hours

cannot be made.

• It is prohibited to turn off the unit from 4 minutes before the

programmed starting time.

• It is prohibited to change channel from 15 seconds before

the programmed starting time.

• [REC I] does not work from 2 minutes before the

programmed starting time. If it comes to 2 minutes before

the starting time during regular or one-touch timer recording,

the recording in progress will be stopped.

• Playback of DVD/CD is prohibited from 2 minutes before the

programmed starting time when the recording media is DVD.

If it comes to 2 minutes before the programmed starting time

during DVD/CD playback, the playback will be stopped.

• When 2 or more programmes are overlapped, “Timer

programme overlapped” appears, and the overlapped

programme will be displayed in blue. To correct the timer

programme refer to “Checking, Cancelling or Correcting the

Timer Programming Information” on page 34.

• If the Start time is earlier and the End time is later than the

current time, the recording will start immediately after you

press [ENTER\OK] at step

10 on page 34.

• As to the timer recording in progress (which is shown in red

in the timer programme list), you only can edit the end time.

The changes made during recording will be recognised as

only specific to that recording in progress and it will not

affect the daily or the weekly recording setting.

Skip the Periodical Timer Recording

Stop the Timer Recording in Progress

If the Timer Programming did not

Complete Correctly

E1–E22, E37–E39 Recording error

E23–E24 Unrecordable disc

E25/E51 • Copy prohibited programme

• Cannot record because of the NTSC /

PAL-60 signal is received.

E26–E28 Copy prohibited programme

E29 Disc protected

E30 Disc full

E31 Already recorded 99 titles (video mode)

E32 Already recorded 99 titles (VR mode)

E33 Already recorded 999 chapters

E34 No space for Control Information

E35 PCA (Power Calibration Area) full

E36 Already finalised video format disc

1/1

E40

03/12 7:00 9:00

1 BBC1

03/1210:00

Date Start End CH

Timer Programming

STTL

PDC

THU

New Programme

E40 • There are some unrecorded parts due

to the overlapped timer programmes.

• Recording did not start at the start

time.

E41 Power failure

E42 No disc

E43 Already 49 titles recorded (+VR mode)

E44 Already 254 chapters recorded (+VR

mode)

E45 Copy prohibited programme

E46 It is impossible to record additionally on

a disc recorded by other units when

setting “Make Recording Compatible” to

“OFF”. (+VR mode)

E47 Already 600 titles recorded on the HDD.

E49–E50 HDD recording is cancelled due to the

insufficiency of the disc space on the

HDD.

Notes for the Timer Recording

E3TK2BD_EN.book Page 35 Thursday, April 16, 2009 12:00 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba RDXV59 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info