Bedienungsanleitung Toshiba RDXV59 (Seite 42 von 84) (Englisch)

465047

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

You can copy the contents of a videotape to HDD or DVD disc.

Limitation:

• If a copy control signal is detected during dubbing, the

dubbing will be stopped.

• Copy-once programmes which are recorded directly

from the TV can be dubbed to the HDD and CPRM

compatible VR mode DVD-RW.

• Copy-once programmes which are copied from the HDD

/ DVD to a videotape cannot be dubbed further from the

videotape to the HDD / DVD.

Limitation (VCR to HDD):

• With VCR to HDD dubbing, the unit recognise the HDD’s

remaining time as the dubbing duration. The maximum

possible duration is 12 hours.

Limitation (VCR to DVD):

• You cannot dub to the finalised video mode DVDs.

• You cannot dub to the protected VR mode DVDs.

Preparing for dubbing:

• Insert a videotape to be dubbed.

Preparing for dubbing (VCR to HDD):

• Make sure there is enough space on the HDD.

Preparing for dubbing (VCR to DVD):

• Insert a recordable DVD.

• Make sure there is enough space on the DVD.

You can copy the contents of the HDD / DVD to a videotape.

Limitation:

• If a copy control signal is detected during dubbing, the

dubbing will be stopped.

Limitation (DVD to VCR):

• The contents of DVDs made on this unit can be dubbed.

Other discs may not be dubbed.

Preparing for dubbing:

• Insert a recordable videotape with a record tab intact.

• Make sure that the videotape has enough space to

record the contents.

Preparing for dubbing (DVD to VCR):

• Insert a disc to be dubbed.

You can start dubbing right away with just one touch.

If you want to record a title in the HDD, press [HDD] first.

If you want to record a title in a disc, press [DVD] first.

During playback of the title you want to dub, press

[DUBBING].

If you are playing back an HDD, HDD to DVD dubbing will start

right away.

If you are playing back a DVD, DVD to HDD dubbing will start

right away.

(HDD to DVD only)

During playback of the title you want to dub, press

[DUBBING HDD M DVD] on the front panel.

HDD to DVD dubbing will start right away.

To stop the dubbing in progress:

Press [STOP C] on the front panel.

Press [STOP C] for 2 seconds on the remote control.

Note

• When dubbing from DVD to HDD, only One Touch Dubbing

will be available for finalised DVD-R, video mode DVD-RW

or DVD+R.

• The dubbing will start from the beginning of the title being

played back.

• The unit will dub only the title being played back.

• If the title was in the resume stop mode, the dubbing will

start from the beginning to the end of the resume stopped

title.

• When dubbing from HDD to DVD or VR mode DVD-RW to

HDD, recording mode will automatically be set to “High”

whenever the conditions are met. (See page 41.)

• If the high speed dubbing is not available, the title will be

dubbed in normal speed with the recording mode of the title.

• If the title is recorded in other brand’s DVD recorder, the title

will be dubbed in normal speed with the recording mode that

you set with [REC MODE].

• If there is not enough space left on the disc for high/normal

speed dubbing with the title’s recording mode, the title will be

dubbed in normal speed with “Auto” mode. If there is not

enough space left on the disc for normal speed dubbing with

SLP mode, the title will be dubbed in normal speed with SLP

mode until the space of the disc runs out.

• If you press [DUBBING HDD M DVD] on the front panel in

stop mode without selecting any title, the unit will start

dubbing the last title in the Original List or the Playlist. It will

start dubbing the title in the Original List if the Original List

was the last selected list. It will start dubbing the title in the

Playlist if the Playlist was the last selected list.

If you want to record a title in the videotape, press [VCR]

first.

1 Press [PLAY B] to start the playback of the

videotape you want to dub.

2 Press [STOP C] or [PAUSE F] where you want

to start dubbing.

3 Press [DUBBING VCR M DVD] on the front

panel.

The dubbing will start from there to the end.

To stop the dubbing in progress:

Press [STOP C] on the front panel.

Press [STOP C] for 2 seconds on the remote control.

Note

• When dubbing starts, the video image may be distorted

because of the Digital Tracking function. This is not a

malfunction. Play the videotape until the image clears up

and then start the dubbing.

• Dubbing takes as much time as the playback does.

VCR to HDD / DVD

HDD / DVD to VCR

One Touch Dubbing

One Touch Dubbing between HDD and DVD

HDD

DVD-RW

Video

DVD-RW

DVD-R

DVD+RW

DVD+RW DVD+R

DVD+R

VCR

One Touch Dubbing from VCR to DVD

E3TK2BD_EN.book Page 42 Thursday, April 16, 2009 12:00 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba RDXV59 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info