Bedienungsanleitung Toshiba RDXV59 (Seite 76 von 84) (Englisch)

465047

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

This feature allows you to go to a specific point on a tape by

entering the exact amount of time you want to skip in order to

reach the point.

1 Press [SEARCH] repeatedly until the time

search menu appears.

2 Enter your desired time to skip using

[the Number buttons] within 30 seconds.

3 Press [FWD D] or [REV E] to start time

search.

If you want to go in the forward direction, press

[FWD D].

If you want to go in the reverse direction, press [REV E].

After index search, the unit will play back the tape

automatically.

Note

• This function is not available during recording.

•Press [STOP C] to stop the search.

• If the tape reaches the end during the search, this unit will

cancel it and rewind the tape.

• You can set the time up to 9:59 (9h. 59min.).

Other Operations

To cue or review picture during playback

(Picture Search):

Press [FWD D] or [REV E] during playback.

Press it again and the unit will search in super high speed (in

the LP mode only).

To freeze the picture on TV screen during playback

(Still mode):

Press [PAUSE F]. Each time you press the button, the picture

will be forwarded frame by frame.

If the picture begins to vibrate vertically during the still mode,

stabilise the picture by pressing the [PROG. G\H]. If the

picture is distorted or rolling vertically, adjust the vertical hold

control on your TV, if equipped.

To reset the tape counter:

Press [CLEAR].

To play back in slow forward motion:

During playback, press [PAUSE F], then press [FWD D].

If the noise bars appear on the TV screen, you can reduce it

by pressing [PROG. G\H]. Slow reverse is not available in

VCR mode.

Note

• Still / Slow / Pause mode will be automatically cancelled

after 5 minutes to prevent damage to the tape and the video

head.

• To return to normal play back from the Picture Search / Still /

Slow mode, press [PLAY B].

Hi-Fi Stereo Sound System

This unit will record and playback Hi-Fi stereo sound.

In addition, it has an A2 and NICAM stereo sound decoder.

This unit will receive stereo and bilingual broadcasts and it is

possible to record in several ways and to play back the sound.

Selecting the Audio Mode

You can select each mode by pressing [AUDIO D] on the

remote control. Each mode is indicated on the TV screen as

following.

Audio mode during playback of the recorded tape in Hi-Fi

mode:

Audio mode during reception of bilingual broadcasts:

Note

• If you play back non-Hi-Fi tapes, the unit will play back

automatically in monaural even if you select any mode.

• If the stereo signal becomes weak, the broadcast is

automatically recorded in monaural.

Time Search

VCR

Mode Audio output

Display on the

TV screen

Stereo Stereo STEREO

L L audio from both speakers LEFT

R R audio from both speakers RIGHT

Normal Monaural MONO

Mode Audio output

Display on the

TV screen

Main Main audio from the both speakers Main

Sub Sub audio from the both speakers Sub

Main /

Sub

• Main audio from the left speaker

• Sub audio from the right speaker

Main

Sub

E3TK2BD_EN.book Page 76 Thursday, April 16, 2009 12:00 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba RDXV59 Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info