Bedienungsanleitung Toshiba TDP-T250 (Seite 27 von 31) (Englisch)

485557

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

5352

Others

The indicator lights and a beep sound inform you of internal abnormalities.

No power

⇒ Problem with projector

• Unplug the power cord, and contact your dealer.

Lamp went out during use, or won’t come on

⇒ Lamp temperature is high so that it is difficult to turn on, the

lifetime of

the lamp has ended or the projector is malfunctioning. In this

case, a beep sound is made.

•

Unplug the power cord and wait for a short while, then turn the power

back on.

• If a lamp burns out, replace it with a new one.

❈ After approx. one minute of abnormal display, the projector

returns to the standby state waiting for internal cool down.

Power went out during use

⇒ Internal overheating, or the outside temperature is too high. In

this case, a beep sound is made.

• Place the projector so that the air intake and exhaust are not

blocked.

•

Unplug the power cord and wait for a short while, then turn the power

back on.

❈ The icon will appear before the power goes out.

❈ After approx. one minute of abnormal display, the projector

returns to the standby state waiting for internal cool down.

Power went out during use

⇒ Problem with internal cooling fan. In this case, a beep sound is

made.

• Unplug the power cord, and contact your dealer.

❈ The

icon will appear before the power goes out.

❈ After approx. one minute of abnormal display, the projector

returns to the standby state waiting for internal cool down.

Power went out during use

⇒ Problem inside the projector. In this case, a beep sound is made.

•

Unplug the power cord and wait for a short while, then turn the power

back on.

• If the above action will not clear the problem, unplug the power

cord, and contact your dealer.

❈ The

icon will appear before the power goes out.

❈ After approx. one minute of abnormal display, the projector

returns to the standby state waiting for internal cool down.

WARNING

•

Request cleaning and maintenance of a ceiling-mounted unit from your projector dealership

Attempting to clean/replace the lamp at a high site by yourself may cause you to drop

down, thus resulting in injury.

■ Lens cleaning

• Clean the lens with a commercially available blower and/or

lens cleaner.

• The lens is easily scratched, so do not rub it with hard objects,

or strike it.

■ Main unit cleaning

• Clean the main unit after unplugging the power cord.

• Wipe dirt off the main unit gently with a soft cloth.

• If the soiling is severe, dip the cloth in a neutral

detergent diluted in water, wring well, and gently wipe

off the dirt, then finish up by wiping with a dry cloth.

Lens and main unit cleaning

(Off)

Or (Orange lit)

(Red lit)

Trouble indications

(Red lit)

(Green lit)

(Red lit or

flashing)

(Red lit)

(Red lit or flashing)

(Red lit)

(Green

lit or Off)

(Green

flashing)

(Green lit

or Off)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba TDP-T250 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info