Bedienungsanleitung Toshiba TDP-T80 (Seite 18 von 22) (Englisch)

485623

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Maintenance

Used Lamps

This projector’s lamps contain trace amounts of environmentally harmful inorganic

mercury. Be careful not to break used lamps, and dispose of them in accordance with

local regulations.

Lens and main unit cleaning

WARNING

•

Request cleaning and maintenance of a ceiling-mounted unit from your projector dealership

Attempting to clean/replace the lamp at a high site by yourself may cause you to drop

down, thus resulting in injury.

■ Lens cleaning

• Clean the lens with a commercially available blower and/or

lens cleaner.

• The lens is easily scratched, so do not rub it with hard objects,

or strike it.

■ Main unit cleaning

• Clean the main unit after unplugging the power cord.

• Wipe dirt off the main unit gently with a soft cloth.

• If the soiling is severe, dip the cloth in a neutral

detergent diluted in water, wring well, and gently wipe

off the dirt, then finish up by wiping with a dry cloth.

● Replacing cooling fans

To maintain the performance, it is recommended that cooling fans should be replaced

about every 2 to 3 years. Consult with your dealer for details.

Lamp replacement (Continued)

Unplug power cord.

Wait until lamp is sufficiently cooled.

Wait for at least 1 hour.

Remove the lamp cover.

Loosen the 1 screw, then pull up to the direc-

tion of the arrow with your fingers as shown to

remove the lamp cover. Use care to avoid any

damage to nails and/or tip of your finger(s). If

you have any difficulty in removal, you can use

a screwdriver or any other smaller tool for your

convenience.

Pull out the lamp.

Loosen the 2 screws holding the lamp in place,

and pull up the handle to remove the lamp.

Mount the new lamp.

Align the orientation, press down until the bottom is

reached, and lock in place using the two lamp

locking screws.

Replace the lamp cover.

Align the cover, and press it in, then tighten the

screws loosened in step

until the lamp cover is

no longer loose.

Reset the lamp timer.

See the lamp’s manual for instructions on resetting

the lamp timer.

Notes and Precautions

• Press the button twice to display (a rough guide) the time of lamp use, the Lamp time

item, in the Status display menu.

p.32

• It is recommended that the lamp be replaced after 2,000 hours of use. When Lamp time

reaches 2,000 hours, the

icon and a message will appear. This display disappears

when you press

button.

• Attach the lamp cover correctly so that it is not loose. If it is not attached correctly, the

lamp may fail to come on

p.36

, and the lamp’s lifetime may be shortened.

• Always replace the lamp with a new one.

• The lamp is made out of glass. Do not touch the glass surface with your bare hands,

bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)

Lamp cover

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toshiba TDP-T80 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info