664750

TP-LINK AP200 Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
Frequently Asked Questions (FAQ)
Hardware Information
©2016 TP-LINK
Power the device with the included passive PoE injector when the device is
located far from a power outlet.
Note: The passive PoE injector supports a cable length up to 30 meters due to the environment.
AP200’s Wi-Fi Name
or
Passive PoE Injector
Internet
Wired Router
Wired Router
A
B
C
D
Internet
AP200’s SSID
VLAN 2
VLAN 1
1. Connect the AP device according to steps A to D in the diagram.
2. Turn on the power and wait until the Power ( ) and Wireless ( & )
LEDs are lit and stable, use the default SSID and Password printed on
the product label to join the AP device’s Wi-Fi network.
Q3. How do I recover the AP device’s web management password or
retrieve my Wi-Fi password?
• If you forget the password required to access the AP device's web
management page and your Wi-Fi password, you must restore the
AP device to its factory default settings.
• If your forget your Wi-Fi password, but are able to access the AP
device's management interface, connect a computer or mobile
device to the AP device via wired or wireless. Log in and go to
Advanced > Wireless > Basic Settings to retrieve or reset your Wi-Fi
password.
Q5. What can I do to maximize my signal strength in Repeater/Bridge
mode?
When choosing an ideal location to optimize wireless signal in
Repeater/ Bridge mode, please use the following recommendations.
Q1. How do I restore the AP device to its factory default settings?
With the device powered on, use a pin to press and hold the Reset button
for five seconds until the Power LED starts blinking, then release the
button.
Q2. What can I do if the login window does not appear?
• Change the computer's static IP address to obtain an IP address
automatically.
• Verify if http://tplinkap.net or http://192.168.0.254 is correctly entered in
the web browser.
• Use another web browser and try again.
• Reboot your AP device and try again.
Q4. What can I do if my wireless is not stable?
It may be caused by too much interference, you can try the following
methods:
• Set your wireless channel to a different channel.
• Move the AP device to a new location away from Bluetooth devices
and other household electronics, such as cordless phone, microwave,
and baby monitor, etc., to minimize signal interference.
Note: Upon resetting, all previous configurations will be cleared, and the AP device will
reset to the default AP Mode.
Enjoy!
• Less Obstacles Ensure Better Performance
Choose a location with less obstacles that may block the signal between
the AP device and the host network. An open corridor or a spacious
location is ideal.
• Less Interference Provides More Stability
Choose a location away from Bluetooth devices and other household
electronics, such as cordless phone, microwave, and baby monitor, etc.,
to minimize signal interference.
• The Best Way is Halfway
Generally, the ideal location for the repeater is halfway between your
wireless router and your wireless clients. If that is not possible, place it
closer to your wireless router to ensure stable performance.
LED:
Power
On
Off
Blinking
The device is on.
The device is off.
The device is initializing or upgrading.
2.4GHz and 5GHz
On
Off
The 2.4GHz and 5GHz wireless are working properly.
The 2.4GHz and 5GHz wireless are disabled.
( Always off when in Client mode. )
LED Status Indication
Ethernet
A device is connected to the Ethernet port.
No device is connected to the Ethernet port.
WPS/Signal Strength
Slow blinking
On
Quick blinking
Solid green
Solid orange
Solid red
Off
WPS connection is in process.
WPS connection is successful.
WPS connection fails.
The signal strength is great.
The signal strength is good.
The singal strength is too weak.
The device is disconnected from the host network.
Signal strength indicator (Repeater/Bridge/Client mode)
On
Off
WPS operation indicator
The AP device creates multiple wireless networks to provide VLAN groups.
Multi-SSID Mode
3. Launch a web browser and enter http://tplinkap.net, then
log in using admin (all lowercase) for both Username and
Password.
Now, connect your wireless devices to the different Wi-Fi
networks to be isolated by VLANs.
4. Click Quick Setup, then select Multi-SSID mode and click
Next. Follow the step-by-step on-screen instructions to
complete the configuration.
Power on via PoE Injector
• Power off your host AP and enter http://tplinkap.net into the web
browser to try again.
Default Wireless Network Information:
The default case-sensitive SSIDs (Network Names) and Wireless
Password/PIN are
printed on the product label.
LED Button:
Press this button to turn on or turn off the LEDs.
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für TP-LINK AP200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von TP-LINK AP200

TP-LINK AP200 Bedienungsanleitung - Englisch - 54 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info