762366

TP-LINK EAP610 Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
©2021 TP-Link 7106509200 REV1.1.1
The products of TP-Link partly contain software code developed by third parties, including software code
subject to the GNU General Public License (“GPL”). As applicable, the terms of the GPL and any information on
obtaining access to the respective GPL Code used in TP-Link products are available to you in
GPL-Code-Centre under (https://www.tp-link.com/en/support/gpl/). The respective programs are distributed
WITHOUT ANY WARRANTY and are subject to the copyrights of one or more authors. For details, see the GPL
Code and other terms of the GPL.
The EAP supports two configuring options:
To configure and manage EAPs singly (usually suitable for a small network with a few
EAPs), Standalone Mode is recommended. Please refer to Option 1.
To configure and manage EAPs in batch, Controller Mode is recommended. Please refer to
Option 2.
The EAP can be powered via a power adapter or a PSE device (such as a PoE switch) which
complies with LPS or PS2 standard.
Option1: Standalone Mode
Option1: Via PoE Switch (Compliant with 802.3at)
Option2: Via Power Adapter
A DHCP server (typically a router with DHCP function enabled) is required to assign IP addresses to
the EAPs and clients in your local network.
Via Omada App
1. Connect wirelessly by using the default SSID (format: TP-Link_2.4GHz/5GHz_XXXXXX) printed
on the label at the bottom of the product.
2. Launch a web browser and enter http://tplinkeap.net in the address bar. Use admin for both
Username and Password to log in.
3. Set up a new Username and Password for secure management purpose. Modify the wireless
parameters and reconnect your wireless devices to the new wireless network.
To configure other EAPs, connect your device to the EAP by the coresponding default SSID and
repeat the steps listed above. You can configure some basic functions in Standalone Mode. If you
want to configure advanced functions, use Controller Mode.
1. Download the TP-Link Omada App on your mobile device. It can be downloaded from App Store or
Google Play:
2. Connect your mobile device to the EAP by using the default SSID (format:
TP-Link_2.4GHz/5GHz_XXXXXX) printed on the label at the bottom of the product.
3. Open the Omada App, and wait for the EAP to appear on the Standalone APs page. Tap on the
EAP you want to congure.
The Omada App is designed to help you quickly configure the common settings. If you want to
configure advanced settings, log in to the web page of your EAP or the controller.
Via a Web Browser
Omada Hardware Controller (OC200/OC300), which is pre-installed with Omada Software Controller, is a
good alternative if you have no spare PC to keep running Omada Software Controller in the network. It
needs to be purchased additionally. For more details, refer to the Installation Guide of OC200/OC300.
Via Omada Software Controller Via Omada Cloud-Based Controller
Via Omada Hardware Controller (OC200/OC300)
Option2: Controller Mode
Controller Mode applies to the large scale network with mass devices. All devices can be centrally
configured and monitored via Omada Software Controller, Omada Hardware Controller or Omada
Cloud-Based Controller.
1. Download the TP-Link Omada App on your mobile device. It can be downloaded from App Store or
Google Play:
Scan for Omada App Download Omada App
or
With Omada App, you can also manage your Omada Software Controller at a local site and remote site.
Note that Omada Software Controller needs to be kept running when using Omada App.
Local Management
For the detailed configurations, refer to the User Guide of the controller and EAPs. The guides can be found
on the download center of our official website: https://www.tp-link.com/support/download/.
Omada App
2. Launch your Omada App and configure the controller at a local site or remote site.
Remote Management
Omada Cloud Portal
Connect an Ethernet cable from the PoE switch (compliant with 802.3at) to the Ethernet port.
Plug one end of the provided power adapter into the power port of the EAP and the other end to a
standard electrical wall outlet.
Power Supply
3
PoE Switch (Compliant with 802.3at)
Switch
Power Adapter
Software Conguration
4
Internet
Clients
Router
EAP
EAP
Scan for Omada App Download Omada App
or
Switch
Router
For technical support, the user guide and other information,
please visit https://www.tp-link.com/support, or simply scan the QR code.
If you have any suggestions or needs on the product guides,
welcome to email techwriter@tp-link.com.cn.
To ask questions, find answers, and communicate with TP-Link users or engineers,
please visit https://community.tp-link.com to join TP-Link Community.
Safety Information
Keep the device away from water, re, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you
need service, please contact us.
Do not use the device where wireless devices are not allowed.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Adapter shall be installed near the equipment and shall be easily accessible.
Omada Cloud-Based Controller
1. Download the TP-Link Omada App on your mobile device. It can be downloaded from App Store or
Google Play:
2. Launch Omada App and log in with your TP-Link ID. Then go to Cloud Access. A list of controllers
that have been bound with your TP-Link ID will appear. Then you can further configure the controller.
Scan for Omada App Download Omada App
or
With Omada App, you can also manage your Omada Cloud-Based Controller.
Before managing the devices via Omada Cloud-Based Controller, make sure they can access the
internet.
Omada App
1. On the PC with Windows OS or Linux OS, download the Omada Software Controller installation
file from https://www.tp-link.com/support/download/omada-software-controller/.
2. Run the file and follow the wizard to install the Omada Software Controller.
3. Launch the Omada Software Controller and follow the step-by-step instructions to complete
the Quick Setup. After the wizard is finished, a login screen will appear.
4. Enter the username and password you created and click Log in. Then you can further
configure the network.
1. Enable Cloud Access on the setting page on the controller and bind a TP-Link ID to your
controller. If you have congured this in the setup wizard, skip the step.
a. Connect your mobile device to the EAP by using the default SSID (format:
TP-Link_2.4GHz/5GHz_XXXXXX) printed on the label at the bottom of the product.
b. Launch Omada App and go to Local Access, tap the + button on the upper-right corner to add
the controller. Then you can further congure the controller.
a. Make sure Cloud Access is enabled on your controller and your controller has been bound with
your TP-Link ID.
b. Launch Omada App and log in with your TP-Link ID. Then go to Cloud Access. A list of
controllers that have been bound with your TP-Link ID will appear. Then you can further
configure the controller.
2. Launch a web browser and enter https://omada.tplinkcloud.com in the address bar.
3. Enter your TP-Link ID and password to log in. A list of controllers that have been bound with your
TP-Link ID will appear. Then you can click Launch to further congure the controller.
After installing Omada Software Controller, you can remotely access the controller through Omada
Cloud Portal. Follow the steps below.
Clients
EAP EAP EAP
1. Launch a web browser and enter https://omada.tplinkcloud.com in the address bar. Enter your
TP-Link ID and password to log in.
2. Click Add Controller and register for an Omada Cloud-Based Controller. Follow the instructions to
complete the setup process.
3. Add devices with the serial number, make sure the devices are online and in factory default.
4. Assign appropriate licenses in order to manage and congure the devices on the cloud-based
controller. Then wait until your controller is deployed.
Switch
Router
EAP EAP
Clients
Omada Hardware Controller
Controller
Omada Software Controller
Or
EAP
running on the Host PC
(OC200/OC300)
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für TP-LINK EAP610 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info