Bedienungsanleitung TP-LINK RE350K (Seite 2 von 2) (Englisch)

772850

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Frequently Asked Questions

Option 2 Setup Using a Computer

1 Plug In

Plug in the range extender to an electrical wall outlet near your router.

Toggle the Power switch to On and wait until the Power LED is lit a

solid green.

2 Connect via Wireless

Disconnect the Ethernet connection from your computer (if any). Click the

Wi-Fi icon on the taskbar and select the extender’s default SSID (network

name), e.g. TP-LINK_2G_EXT. No password is needed to connect.

3 Log In

Launch a web browser and type: http://tplinkrepeater.net in the

address ﬁeld. Enter admin (all lowercase) for both username and

password to log in.

4 Extend your Wi-Fi Network

Follow the Quick Setup wizard to extend your 2.4GHz and 5GHz Wi-Fi

networks.

5 Relocate your Extender

A Plug in the extender to an outlet around the midpoint between your

Wi-Fi router and the Wi-Fi “dead” zone.

B Wait for the extender to reconnect and both Wi-Fi LEDs are lit a solid

green. If not, relocate the extender closer to the router.

6 Connect to Extended Networks

Unless you customized the extended network names during the

conﬁguration, the extender adds _EXT to the end of the main network’s

SSIDs and uses the same Wi-Fi password.

1. How do I reset my Range Extender to factory defaults?

With the Range Extender plugged in, press and hold the Reset button until the

Power LED turn oﬀ and turn back on (about 2 seconds).

2. How to troubleshoot if the App-Cong process fails?

Follow Kasa’s instruction to reinitiate the App-Conﬁg process or use Option 2 to set

up the extender using a computer.

3. What should I do if I cannot access the extender’s web interface?

• Make sure that you only use either Ethernet or Wi-Fi connection when accessing

the extender’s web interface but not both.

• Make sure that your computer is set to obtain an IP address automatically

(DHCP).

admin

http://tplinkrepeater.net

Quick Setup

Connect to router’s 5GHz Wi-Fi Summary

2.4GHZ NETWORK MAC ADDRESS SECURITY

MyHome 00:AA:BB:11:CC:22 WPA2

Connect to router’s 2.4GHz Wi-Fi Setup Extended Wi-Fi

2.4GHz Wi-Fi Password:

MyHome

MyHome_5G

MyHome_EXT

MyHome_5G_EXT

Wi-Fi: On

Turn Wi-Fi Off

TP-LINK_2G_EXT

TP-LINK_5G_EXT

Join Other Network...

Open Network Preferences...

Networks

Airplane mode

Off

Wi-Fi

TP-LINK_2G_EXT

Connect automatically

TP-LINK_5G_EXT

Connect

MAC OSX Windows

4. What should I do if the Wi-Fi LEDs are not on after completing the

setup process?

You may have entered the incorrect W-Fi password of your main network. Log into

the extender’s web interface to check the password and try again.

5. Why does the range extender sometimes slow down my Wi-Fi

connection?

With the addition of the range extender into your network, peformance between

the extender and your Wi-Fi device is aﬀected. We recommend that you connect

to the main router when you are within its Wi-Fi range, and only connect to the

extender when your Wi-Fi device is in the Wi-Fi “dead” zone.

To minimize signal interference, choose a location away from Bluetooth®

devices and other household electronics such as cordless phones,

microwave ovens, baby monitors, etc.

Keep away from

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

TP-LINK RE350K Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von TP-LINK RE350K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info