513669

TP-LINK TL-WR710N Anleitung

1
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
150Mbps Wireless N Mini Pocket Router
MODEL NO. TL-WR710N
Package Contents
QIG
150Mbps Wireless N Mini Pocket Router
MODEL NO. TL-WR710N
Resource CD
Ethernet Cable
TL-WR710N
Quick Installation Guide
7106504220 REV1.0.0
For Windows 8
Click the icon at the bottom of your screen,
and a network list will appear at the right side of
your screen. Select your target network, and
then click Connect.
3 4
The screen will appear as shown below. Enter
the network security key, and then click Next.
Instant Wireless Connection
Physical Description
Hardware Connection
Wireless Router Mode (Default)
As the supplement of wired LAN, TL-WR710N
enables the wired LAN to connect to the
Internet wirelessly.
As a wireless router, TL-WR710N create an
instant private wireless network and share
Internet to multiple Wi-Fi devices.
Access Point Mode
2
1
After hardware connection, please write down the
Wireless Password and SSID on the label of your
Router for later use. Both are case-sensitive.
SSID
: Wireless Network Name of TL-WR710N.
*
Wireless Password/PIN
: Pre-encryption password of
TL-WR710N.
*
LAN/WAN
: This port works as LAN in Access Point/Repeater/
Client/WISP Client Router mode and as WAN in Wireless Router
mode.
Reset
It is used to reset the Router to its factory defaults.
Indication
TL-WR710N LED:
Status
Solid Blue
The device is working properly.
Blinking
Condition 1: System is booting.
Condition 2: The Ethernet Cable or USB Device
is connecting to the product.
For more detailed information about
Reset
, please refer to
Appendix: Troubleshooting
.
Client Mode
TL-WR710N is used as a wireless network
card to connect the wireless network signal
or wireless router.
3 4
WISP Client Router Mode
In WISP mode, TL-WR710N enables multiple
users to share Internet connection from WISP.
5
For Windows 7
Click the icon at the bottom of your desktop.
Click refresh button, and then select the target
network. Click Connect.
3 4
Enter the Security key. Click OK.
For Mac OS
Click the icon at the right top of your
desktop. Click refresh button, and then select
the target network.
3 4
The screen will appear as shown below. Enter
the Password, and then click OK.
LAN
: This port works as LAN in Wireless Router/Access
Point/Repeater/Client/WISP Client Router mode .
USB
It is used to connect USB Flash or Hard Disk for le sharing and
Mobile devices for charging.
S/N:XXXXXXXXXXXX
Model:TL-WR710N(EU) Ver:1.0
Wireless Password/PIN:12345678
SSID:TP-LINK_663D6C
MAC:B0487A663D6C
Repeater Mode
TL-WR710N is used to extend the range of
wireless signal of the existing AP or wireless
router.
The LAN devices share the same IP from ISP
through Wireless or Wired port. While
connecting to Internet, the LAN/WAN
Ethernet port works as a WAN port at
Wireless Router mode. It’s suitable for most
hotel and home network with Plug-N-Play
after nishing Instant Wireless Connection.
In this mode, this device can be connected to a
wired network and transform the wired access
into wireless that multiple devices can share
together, especially for a home, oce or hotel
where only wired network is available.
In this mode, this device can copy and
reinforce the existing wireless signal to
extend the coverage, especially for a large
space to eliminate signal-blind corners.
In this mode, this device can be connected to
another device via Ethernet port and act as
an adapter to grant your wired devices
access to a wireless network, especially for a
Smart TV, Media Player, or game console only
with an Ethernet port.
In this mode, the device enables multiple
users to share Internet connection from
WISP. The LAN port devices share the same IP
from WISP through Wireless port.
Go to Start > Control Panel > View network
status and tasks > Change adapter settings.
Right click Wireless Network Connection,
󰔥
and select Properties. Double click Internet
Protocol Version 4 (TCP/IPv4) in the item list.
1 2
Set up the TCP/IP Protocol in "Obtain an IP
address automatically" mode on your PC. Click
OK.
Click the icon at the right top of your
desktop. Then click Open Network
Preferences…. The screen will appear as
shown below. Choose AirPort and click
Advanced….
2
Set the Congure IPv4 as “Using DHCP”. Click
OK.
1
Go to Metro interface> Control Panel > View
network status and tasks > Change adapter
settings. Right click Wireless Network
Connection,
󰔥
and select Properties. Double
click Internet Protocol Version 4 (TCP/IPv4) in
the item list.
2
Set up the TCP/IP Protocol in "Obtain an IP
address automatically" mode on your PC.
Click OK.
1
The default SSID of the network is TP-LINK_xxxxxx
(The TP-LINK_xxxxxx is the SSID on the label. )
The pre-encryption function is enabled by default and the default Network key/Security key is the Password on the
label. The password is case-sensitive.
1.
2.
5
When you can see Connected as shown in the
following screen, you’ve successfully
connected to the wireless network.
5
When Connected appears behind the SSID,
you have successfully connected to the target
network.
5
When appears before the SSID, you have
successfully connected to the target network.
(This method is for connecting to the default Wireless Router Mode. If you want to configure Wireless Router Mode or choose other modes, please skip to Router Conguration.)
S/N:XXXXXXXXXXXX
Model:TL-WR710N(EU) Ver:1.0
Wireless Password/PIN:12345678
SSID:TP-LINK_663D6C
MAC:B0487A663D6C
IC: 8853A-WR710N
FCC ID: TE7WR710N
1PXFS

7
_
)["
.PEFM 5-
83/
%FGBVMU"DDFTT
IUUQUQMJOLMPHJOOFU
6TFSOBNFBENJO
1BTTXPSEBENJO
.CQT8JSFMFTT/.JOJ1PDLFU3PVUFS
Reset
LAN/WAN LAN
USB
Protected by
NAT Firewall
Wired Network
Cable
Wired Network
Cable
SSID: def
Connect the plug directly to the TL-WR710N to finish
hardware connection.
The provided power plug may differ from the picture due
to different regional power specifications. Here we take
the EU version as an example.
Note:
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

tp-link-tl-wr710n

Suche zurücksetzen

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für TP-LINK TL-WR710N wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von TP-LINK TL-WR710N

TP-LINK TL-WR710N Bedienungsanleitung - Englisch - 284 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info