Bedienungsanleitung Transcend MP330 (Seite 33 von 36) (Englisch)

485480

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Cannot RECORD voice, Line-In, or the FM radio

To make sure recorded files do not get lost, two safety mechanisms are built into the MP330:

• If remaining battery capacity is less than 10%, you cannot enter the RECORD Mode.

• While recording, if the remaining battery capacity goes below 10% the MP330 will automatically stop

and save the recording.

Track playback sounds intermittent

Unplug the earphones and plug them back in again to make sure they are securely connected.

MP330 powers off automatically

The MP330 features SLEEP Mode and Auto Power Off functions, which are power-saving features. You can

preset your MP330 to power-off automatically. Please refer to the SETTINGS section for more information.

MP330 just isn’t working properly

If your MP330 ever stops working properly, or locks up, try powering it on and off a few times, if this does not

correct the problem you can Reset the MP330 by using a paperclip or pencil tip to hold down the “Reset” button

for 3 to 5 seconds.

Cannot find the file that was just copied to the MP330

Re-copy the file and refer to the “Disconnecting from a Computer” section to remove the MP330 after the copy

process is completed.

A File that was just deleted still appears

Re-delete the file and refer to the “Disconnecting from a Computer” section to remove the MP330 after the

delete process is completed.

MP330 does not operate after formatting in Windows

Formatting the MP330 using the “Quick Format,” or “Full Format” option in Windows

erases the default

system information that the MP330 requires to operate. To re-install the system information, please visit

http://www.transcend.com.tw/ and download a Firmware Update for your MP330.

How do I find out what Windows Media Player version I am using?

• Open your Windows Media Player program.

• Click on the “Help” menu and select the “About Windows Media Player” option.

• The version of your Windows Media Player will be displayed on the computer screen.

Lyrics Sync: Why can’t I see the words of the song I am listening to?

3. For detailed Lyrics Sync instructions, please see the FAQ section on our website at:

http://www.transcend.com.tw/Support/FAQ

An “Insuffucient Power” message is displayed on the screen

If your MP330 displays an “Insufficient Power” message, this means the device supplying USB power to your

digital music player is not outputting stable or adequate voltage to charge the player’s internal battery (usually a

result of a USB hub or extension cable used. This message does not indicate a problem with the music player.

Plug the MP330 directly into your computer’s USB port or a Transcend USB Power Adapter to properly charge

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Transcend MP330 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Transcend MP330

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info