485464
54
Zoom out
Zoom in
Vorherige Seite
1/59
Nächste Seite
EN
54
Why can't I hear any sound on my television when I connect it via HDMI?
i
An audio output format that is not supported by your television is selected.
Please go to the audio settings menu and select the menu entry "D
I GI T AL -AU D I O -OU T " and
choose the option "HDMI LPCM" if your television set does not support real surround sound.
My MovieStation does not play any sound.
i
The volume is to low / Mute is active.
Please check if the volume for your MovieStation and your television or your home
entertainment system are set to an adequate volume and that the sound is not switched off
via the "Mute" button.
Why mustn't I disconnect the MovieStation from the mains supply without having
switched if off beforehand?
i
The loading or saving of the current system settings takes approx. 10 seconds when the
MovieStation is turned on or off. If the MoveStation is disconnected from the mains supply
without having beem switched off beforehand, settings and data may be lost. Please always
switch off the MovieStation by pressing the / button on the device or on the remote control
and wait until the / button on the MovieStation lights up red.
Why is the
/ button still lit in blue even though I have switched it off?
i
The loading or saving of the current system settings takes approx. 10 seconds. The illumination
of the / button changes to red only after all settings have been saved and the MovieStation
has entered the standby mode. If you want to, you can then disconnect the MovieStation from
the mains supply.
The language of the user interface has been changed. How do I change the
language?
In order to change the selected language, enter the "S
E T T I N G S " menu by pressing the "SETUP"
button on your remote control. Select the right menu ("SY S T E M ") and press the z button on
your remote control. The available languages are displayed. Please mark the desired language
and confirm your choice by pressing the z button.
I have adjusted the settings of the MovieStation under "Settings" and would like to
restore the factory defaults.
As described in the "Configuration of the TrekStor MovieStation" chapter, execute the
menu item "L
O A D D E F A U L T S ". The MovieStation will be reset to the factory defaults. The saved files
are not deleted when you do this.
54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Trekstor MovieStation Antarius PLUS wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info