485390
44
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
DVB 168 S (GB)-20 050908
Go to the Main Menu, select "Installation", select "Delete All Channels".
Enter password upon request
A warning message appears. Press "EXIT" to cancel or OK to confirm.
The "Welcome" screen appears.
Make your language selection and press OK.
Follow the instructions on the screen: either load the pre-programmed channel data or start
your individual channel search process.
www.triax.com
20
"Sending" appears on the sending receiver and "Receiving" appears on the receiving
receiver.
The transfer progress bar shows the progress of the channel data transmission. When the
transfer is completed, "Complete" appears.
You can check that the channel data on the Slave and Master receivers are the same.
PC to Receiver (PC - STB)
You will need a suitable software to be able to transfer the channel information from a
receiver to your PC and vice versa. This software will be provided upon request.
Please visit TRIAX website : www.triax.com
Use a RS-232C cable (cross type) to connect the Receiver to your PC.
In your PC programme set your PC as "3.Ch.Data Sender (STB->STB)". "Sender" signifies
the device that is transmitting the channel information.
On the receiver go the Main Menu, select "Installation" and then select menu option "Data
Transfer".
Set your receiver as "2.Ch.Data Receiver (STB<-PC)"
Follow the instructions on the PC program to complete the rest of this process.
9.10 Delete all Channels
This function will delete all channel data from the receiver.All other individual settings will be
kept.
9.11 Factory Preset
Go to the Main Menu and select "Factory Preset".
Enter password upon request.
A warning message appears. Press "EXIT" to cancel or OK to confirm.
The "Welcome" screen appears.
Make your language selection and press OK.
Follow the instructions on the screen: either load pre-programmed channel data or start
your individual channel search process.
This function will delete all channel data and all individual settings from the receiver. The pre-
programmed channel data will be loaded again, and all settings will be reset to their default
values.
44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Triax DVB 168S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info