Bedienungsanleitung Tristar BO-2102 (Seite 4 von 29) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

530959

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

Operation and maintenance

Remove all packaging of the device.

Check if the voltage of the appliance corresponds to the main voltage of your home.

Rated voltage : AC220-240V 50Hz.

Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around

the device. This device is not suitable for installation in a cabinet or for outside use.

Never use the appliance near a sink filled with water or something.

If the device has fallen into the water never try to hold it, but pull the plug from the socket.

Never use the device for opening cans of flammable liquids.

Before first use

Attach the lever (No. 1) on the unit standing by sliding the shaft in the hole above the control

wheel (No. 2) of the device. Attention! The blade of the lever is very sharp.

Use

Turn the lever (No. 1) up and put the can under the retainer axis and against the control wheel

(No. 2). Push the lever down and pierce the can, the machine will start working now. Keep

pushing on the lever, the device will automatically stop when the lid is fully opened.

Grab the can and lift the lever to remove the tin.

Please ensure that you do not cut yourself when you remove the lid, the lid is very sharp.

The size of the can opener is also suitable for opening high cans.

Place the can opener on the edge of the work surface and hold it firmly, to avoid tilting the

device.

Use of the grinder

Make sure that the blade is clean and not oily to prevent to grinding wheel to be dirty.

Do not attempt to sharpen serrated knives! Uneven polishing can be avoided by not pushing

too hard on the knife during sharpening. Hold the lever (No. 1) down to switch on the device.

Place the blade (near the handle) into the opening of the knife sharpener (No. 4) until it

touches the grinding wheel. Pull the knife slowly toward you through the opening.

Repeat 4-5 times until the knife sharpening.

Cleaning

Unplug the appliance from the socket.

Remove the lever (no. 1) of the machine and clean it with warm water. Dry thoroughly before

replacing. Attention! The blade of the lever is very sharp.

Never immerse the appliance in water or other liquid.

Clean the outside of the appliance with a damp cloth and dry it with a soft, clean cloth. Never

use abrasives.

IMPORTANT SAFEGUARDS

• Read all instructions before use.

• Do not touch hot surfaces. Use handles or knobs.

• To protect against electric shock, do not immerse cord, plug or appliance in water or

any other liquid.

• Unplug from outlet when not in use and before cleaning. Allow the device to cool

before putting on or taking off parts. Do not operate any appliance with a damaged

cord or plug or after the appliance malfunctions, or has been damaged in any

manner.

• The use of accessory attachments not recommended by the appliance manufacturer

may cause injuries and invalidate any warranty you may have.

• Do not use outdoors, or on or near direct heat sources

• Do not let cord hang over edge of table or counter, or touch hot surfaces or come

into contact with the hot parts or allow the product to be situated underneath or close

to curtains, window coverings etc.

• This appliance is for household use only and only for the purpose it is made for.

• The appliance must be placed on a stable, level surface.

• This appliance is an attended appliance, and as such should never be left ON or

whilst hot without adult supervision.

• This appliance is not intended for use by persons (including children) with reduced

physical sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by a

person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• Note: To avoid danger by the accidental resetting thermal protection, the device may

not be powered through an external switching device, such as a timer, or connected

to a circuit and is turned regularly by the subject.

• This device is not intended for use with an external timer or a remote control system.

• Note: To avoid danger by the accidental resetting thermal protection, the device may

not be powered through an external switching device, such as a timer, or connected

to a circuit and is turned regularly by the subject.

• A damaged cord or plug must be replaced by an authorized technician to avoid a

hazard. Do not repair the device yourself.

• Using an extension cord or something similar is not allowed.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tristar BO-2102 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info