Bedienungsanleitung Triton RTA300 (Seite 4 von 105) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

665082

Zoom out

Zoom in

Vorherige Seite

1/105

Nächste Seite

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and

any other condition that may affect the power

tool’s operation. If damaged, have the power tool

repaired before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

different from those intended could result in a

hazardous situation.

5) Service

a) Have your power tool serviced by a qualiﬁed repair

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

Safe use of the router table

Always follow these safety instructions when using

your router table

• Alwaysfeedtheworkpieceagainstthedirectionof

rotation arrows (printed around the central hole)

• Alwaysfeedfromthefrontpanel(switchboxend)ofthe

Workcentre or Router Stand, with the workpiece to the

left of the cutter

• Nevertrailyourngersbehindtheworkpiece.Always

use the fence if using a cutter without a bearing or pilot

• Forfree-handworkuseonlybearingorpilotguided

cutters

• Usethesafetyguardwheneverpossible,andkeepit

correctly adjusted

• Alwaysdisconnectyourrouterfrompowerwhenever

changing or adjusting cutters

• AlwayscheckthatthecutterisclearoftheMDF

fence faces, the insert ring, the safety guard and the

workpiece before starting the router

• Removealllooseobjectsfromthetablebefore

operating to prevent them from vibrating into the cutter.

• Alwaysdisconnectpowerwhenworkiscompletedfor

the day, or when leaving the unit unattended

• Followallsafetyinstructionssuppliedwithyourrouter

Wear goggles

Wear ear defenders

Wear a respiratory mask

Wear protective clothing

Wear gloves

The tool must be used only for its prescribed purpose.

Any use other than those mentioned in this manual will

be considered a case of misuse. The user and not the

manufacturer shall be liable for any damage or injury

resulting from such cases of misuse.

The manufacturer shall not be liable for any

modiﬁcations made to the tool nor for any damage

resulting from such modiﬁcations.

Even when the tool is used as prescribed it is not

possible to eliminate all residual risk factors. The

following hazards may arise in connection with the

tool’s construction and design:

•Damagetoeyesifeffectiveprotectionsisnotworn

•Damagetothelungsifaneffectivedustmaskisnot

worn

•Damagetohearingifeffectiveearprotectionisnot

worn

Safety Instructions

FULL_MANUAL123.indd 4 06/07/2012 10:25

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Triton RTA300 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info