Bedienungsanleitung Triton TA 235CSL (Seite 2 von 116) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

665063

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Model number: TA235CSL

Input voltage:

EU - 220V - 240V AC, 50Hz, 10.5A

SA - 220V - 240V AC, 50Hz, 10.5A

AU - 220V - 240V AC, 50Hz, 10.5A

Input power:

2300W / 3.08hp

No load speed: 4500min

-1

Blade diameter: 235mm / 9

⁄4”

Blade bore diameter: 30mm / 1.1”

Blade teeth: 40 TCT

Blade kerf: 2.2 – 3.5 mm / 0.09 – 0.14”

Bevel adjustment: 0° to 45°

Positive bevel stops: 0°, 15°, 22.5°, 30° and 45°

Cutting capacity at 90°: 82mm / 3.2”

Cutting capacity at 45°: 58mm / 2.2”

Insulation:

Net weight: 7.7kg / 16.98lbs

Laser: Class 2

Wave length: 650nm

Output power: ≤1mW

Sound and vibration information:

Sound pressure L

: 97,1dB(A)

Sound power L

: 108,1dB(A)

Uncertainty K: 3dB

Weighted vibration a

: 2,470m/s

Uncertainty: 1.5m/s

The sound intensity level for the operator may exceed 85dB(A) and sound protection

measures are necessary.

As part of our ongoing product development, speciﬁcations of Triton products may alter

without notice.

WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the

time of exposure if necessary. If sound levels are uncomfortable, even with ear protection, stop

using the tool immediately and check the ear protection is correctly ﬁtted and provides the

correct level of sound attenuation for the level of sound produced by your tool.

WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,

tingling and reduced ability to grip. Long term exposure can lead to a chronic condition. If

necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not

operate the tool with hands below a normal comfortable temperature, as vibration will have a

greater effect. Use the ﬁgures provided in the speciﬁcation relating to vibration to calculate the

duration and frequency of operating the tool.

Sound and vibration levels in the speciﬁcation are determined according to EN60745 or

similar international standards. The ﬁgures represent normal use for the tool in normal

working conditions. A poorly maintained, incorrectly assembled, or misused tool, may produce

increased levels of noise and vibration. www.osha.europa.eu provides information on sound

and vibration levels in the workplace that may be useful to domestic users who use tools for

long periods of time.

Thank you for purchasing this Triton tool. This manual contains information necessary for safe and effective operation of this product. This

product has unique features and, even if you are familiar with similar products, it is necessary to read this manual carefully to ensure you

fully understand the instructions. Ensure all users of the tool read and fully understand this manual.

Speciﬁcation

Original Instructions

330135_Z1MANPRO1.indd 2 29/09/2014 15:54

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Triton TA 235CSL Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info