Bedienungsanleitung Trotec BZ30 (Seite 9 von 12) (Englisch)

795067

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

EN 9

CO₂ air quality data logger BZ30

Diagram control

In the following you will find information regarding the subitems

of the diagram control section(4).

Data graph Data list

Setting the scale format

Data overview

Setting the graph format Undo zoom

[Temperature] [Relative humidity]

ppm [CO2]

°C

%RH

Button Function

Data graph Displays the graph with the recorded

values for CO2, temperature and relative

humidity.

Setting the scale

format

Opens the dialog window for adjusting

the horizontal and vertical scales of the

individual channels.

Data list Changes from the graphic display of the

measured values to a list indicating the

individual measuring points.

Data overview Displays a summary of the gathered

data.

Setting the graph

format

Opens the dialog window for adjusting

the background colour, grid lines and

depiction of the three channels.

Undo zoom Indicates the total view of the data

graph.

Zoom Allows to zoom into sections of the

graph.

Cursor Allows to select individual data points.

Adjusting the data logger settings

Click the icon on the toolbar(2) to open the Data logger

settings dialog window.

Data logger settings

Time settings

Current time

Date format DD/MM/YY

Sampling setting

Sampling rate Second

Recording time 1day 4hours 5minutes 36seconds

Cancel

Starting recording

Automatically Manual

CO2 alarm settings

Limit value alarm

Alarm Value

1. Time settings

The current system time is displayed in the Current time

field.

The date format can be set as year/month/day,

month/day/year or day/month/year.

2. Sampling setting

The Sampling setting field prompts the device to record the

measured values at a certain frequency. In the combo box

on the left, you can enter a specific value for the sampling

rate. From the combo box on the right, you can select the

time unit. The Recording time combo box shows the

maximum recording time (depends on the set sampling

rate).

3. Starting recording

The Manual and Automatic selection options allow for the

user to start data logging immediately after exiting the

setting window (Automatic) or to manually start at a later

point in time by pressing the respective button (Manual).

4. CO2 alarm settings

If the Limit value alarm checkbox is checked, the user can

enter the alarm value (in ppm). If the respective measured

value is beyond the alarm limit, the device triggers an

alarm.

Info

Prior to setting the logger to recording mode, the

logger settings [Data logger settings] must always be

made first! In this process, it is irrelevant whether the

settings are changed or remain the same. All saved

data are permanently deleted when set-up is complete.

To save those data before they are deleted, click

Cancel and then download the data.

Adjusting the scale setting

Click the Set scale format button to adjust the horizontal and

vertical graph scales. The Scale format dialog window opens.

Timescale

Start date and time End date and time

Automatic scale User-defined scale

Selecting a channel

Vertical scale

Unit

Minimum

Maximum

Automatic scale User-defined scale

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec BZ30 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec BZ30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info