727848
6
Zoom out
Zoom in
Vorherige Seite
1/15
Nächste Seite
6 EN
infrared radiant heater IRD 1200 / IRD 1800 / IRD 2400 / IRD 3200
Storage
When the device is not being used, observe the following
storage conditions:
dry and protected from frost and heat
in an upright position where it is protected from dust and
direct sunlight
with a cover to protect it from invasive dust, if necessary
Remove batteries from the remote control.
Assembly and installation
Scope of delivery
TIMERP3
P2P1
6
7
8
9
10
11
12
13
4
14
15
161718
1x Device (not pictured)
4x Mounting bracket(6)
2 x Device holder(7)
4 x Hexagon nut M8(8)
4 x Spring washer Ø 8.1 mm(9)
4 x Washer Ø 8.4 mm(10)
4 x Threaded steel anchor M8(11)
2 x Wing screw M6(12)
4 x Hexagon screw M6(13)
4 x Spring washer Ø 6.1 mm(14)
4 x Hexagon nut M6(15)
4 x Spring washer Ø 4.1mm(16)
4 x Hexagon nut M4(17)
4 x Phillips screw M4(18)
1 x Remote control(4)
1xManual (not pictured)
Unpacking the device
1. Open the cardboard box and take the device out.
2. Completely remove the packaging.
3. Fully unwind the power cable. Make sure that the power
cable is not damaged and that you do not damage it during
unwinding.
Assembly
The device is suited for wall and ceiling mounting. Observe the
following requirement for installation inside a room:
Warning
Risk of fire due to improper installation!
There is a risk of fire if the required minimum
distances are not observed.
The device must be positioned at a distance of at least
220 cm from the floor and at least 100 cm from walls
and other objects such as curtains or sockets.
Mounting the wall/ceiling holder
Info
The mounting procedure is identical for all devices.
ü Use tools suitable for the intended task.
1. Connect one device holder and one mounting bracket each
using two medium hexagon screws(M6), hexagon
nuts(M6) and spring washers(Ø6.1mm).
2. Connect the second device holder to the second mounting
bracket.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Trotec IRD3200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Trotec IRD3200

Trotec IRD3200 Bedienungsanleitung - Deutsch - 15 seiten

Trotec IRD3200 Bedienungsanleitung - Holländisch - 16 seiten

Trotec IRD3200 Bedienungsanleitung - Französisch - 14 seiten

Trotec IRD3200 Bedienungsanleitung - Italienisch - 16 seiten

Trotec IRD3200 Bedienungsanleitung - Spanisch - 16 seiten

Trotec IRD3200 Bedienungsanleitung - Polnisch - 16 seiten

Trotec IRD3200 Bedienungsanleitung - Türkisch - 16 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info