753343
8
Zoom out
Zoom in
Vorherige Seite
1/13
Nächste Seite
8 EN
glue gun PGGS 10-230V
Operation
Tips and notes on handling the glue gun
General information:
Degrease metallic surfaces before gluing. Processing
machines often leave oil residues.
The glue cannot be completely removed from textiles. Due
to its high melting point, even hot washing does not
remove the glue.
Moisture can make the glue joint come undone.
If required, use special glue sticks for different types of
material.
If your skin comes into contact with hot glue, immediately
hold the affected area under a jet of cold water for several
minutes.
The materials to be bonded and the surface on which you
are working must neither be highly flammable nor
combustible.
When working with heat-sensitive materials, use a sample
to test whether the material is suited for hot gluing.
Gluing:
Apply the glue in zigzag lines when working with flexible
materials such as textiles.
Heat up quickly cooling materials such as steel e.g. using a
heat gun to improve the adhesive bonding.
Briefly press the workpieces together by hand after gluing.
A clamping device is not required.
You can use the device for point gluing or seam gluing.
Glue joints can be dissolved again by heating.
Glue residues can easily be removed from the nozzle after
the tool has cooled down.
After cooling, remove the glue residues ideally with a sharp
knife.
The glue joints can be painted.
Roughen smooth surfaces before gluing.
Switching the device on and off
Wear your personal protective equipment when working with
the device.
The device allows for both corded and cordless working.
Corded working (continuous operation)
1. Connect the power cable(5) to the socket(11) on the glue
gun.
ðThe operating light(12) is illuminated.
11
5
12
2. Fold out the wire stand(6) and put the glue gun down.
6
3. Allow the glue gun to heat up for approx.5minutes.
ðThe glue gun is ready for operation.
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Trotec PGGS 10-230V wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Trotec PGGS 10-230V

Trotec PGGS 10-230V Bedienungsanleitung - Deutsch - 13 seiten

Trotec PGGS 10-230V Bedienungsanleitung - Holländisch - 13 seiten

Trotec PGGS 10-230V Bedienungsanleitung - Französisch - 13 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info