Bedienungsanleitung Trotec PJSS12-230V (Seite 5 von 20) (Englisch)

753902

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

EN 5

850W pendulum action jigsaw PJSS 12-230V

•Make sure that the base plate is positioned securely

on the contact face during sawing. A jammed saw blade

could break or cause a kickback.

•Keep your hands out of the sawing area. Do not reach

underneath the workpiece. Risk of injury upon contact with

the saw blade.

•Keep your hands away from lifting rod and quick-

release chuck. Crushing hazard upon contact with these

components.

•Ensure sufficient ventilation.

•Regularly check the quick-release chuck for wear or

damage.

•Only use intact, flawless saw blades. Bent and blunt

saw blades could break or cause a kickback.

•Do not attempt to slow down the saw blade movement

by pressing against the blade from the side once the

device is switched off. The saw blade could be damaged,

break or cause a kickback.

•Switch off the power tool when your operation is

completed, but do not remove the saw blade from the

kerf until it has come to a standstill. This serves to

avoid a kickback, then you can put the power tool down

safely.

•Immediately switch off the power tool if the insertion

tool blocks. The power tool can lash out to the side owing

to the forces that build up consequently.

•Wait until the power tool has come to a standstill,

before putting it down. The insertion tool could get

caught resulting in a loss of control of the power tool.

Intended use

Only use the device PJSS 12-230V:

• for straight and curved cuts at angular workpieces made of

wood, plastic and light metal while keeping base plate

contact,

• for mitre cuts up to an angle of 45° at angular workpieces

made of wood, plastic and light metal,

whilst adhering to the technical data (see instructions).

We recommend using the power tool with original Trotec

accessories.

Foreseeable misuse

• The device is not intended for processing damp wood.

• The device is not intended for processing glass or stone.

• The device is not intended for freehand operation without

base plate contact.

Any other use than the one described in the chapter "Intended

use" is regarded as reasonably foreseeable misuse.

Personnel qualifications

People who use this device must:

• have read and understood the instructions, especially the

Safety chapter.

Personal protective equipment

Wear hearing protection.

Excessive noise can lead to hearing loss.

Wear eye protection.

With it you protect your eyes from splintering, falling

and flying pieces which could cause injuries.

Wear a protective mask.

It saves you from inhaling harmful dusts generated

when processing workpieces.

Wear protective gloves.

They protect your hands from burns, crushing injuries

and skin abrasions.

Wear tight-fitting protective clothing.

This protects you from the draw-in and entanglement

hazard posed by rotating parts.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PJSS12-230V Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PJSS12-230V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info