Bedienungsanleitung Trotec PPLS10-750 (Seite 4 von 18) (Englisch)

753367

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

4 EN

planer PPLS 10-750

General Power Tool Safety Warnings– Power tool

use and care

•Do not force the power tool. Use the correct power tool

for your application. The correct power tool will do the

job better and safer at the rate for which it was designed.

•Do not use the power tool if the switch does not turn it

on and off. Any power tool that cannot be controlled with

the switch is dangerous and must be repaired.

•Disconnect the plug from the power source and/or

remove the battery pack, if detachable, from the power

tool before making any adjustments, changing

accessories, or storing power tools. Such preventive

safety measures reduce the risk of starting the power tool

accidentally.

•Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool or

these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

•Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage of

parts and any other condition that may affect the

power tool's operation. If damaged, have the power

tool repaired before use. Many accidents are caused by

poorly maintained power tools.

•Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to

bind and are easier to control.

•Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

•Keep handles and grasping surfaces dry, clean and

free from oil and grease. Slippery handles and grasping

surfaces do not allow for safe handling and control of the

tool in unexpected situations.

General Power Tool Safety Warnings– Service

•Have your power tool serviced by a qualified repair

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

Safety instructions for planers

•Wait for the cutter to stop before setting the tool down.

An exposed rotating cutter may engage the surface leading

to possible loss of control and serious injury.

•Hold the power tool by insulated gripping surfaces,

because the cutter may contact its own cord. Cutting a

"live" wire may make exposed metal parts of the power

tool "live" and could give the operator an electric shock.

•Use clamps or another practical way to secure and

support the workpiece to a stable platform. Holding the

workpiece by your hand or against the body leaves it

unstable and may lead to loss of control.

•Only hold the power tool against the workpiece when

the tool is switched on and running. Otherwise there is

a risk of kickbacks.

•Do not use the power tool for processing metal.

Otherwise, the blade or cutting head could be damaged.

•During operation hold onto the power tool with both

hands and make sure you stand firmly on the ground.

It is safer to handle the power tool with two hands.

•Do not under any circumstances use the power tool if

you detect damages on the mains plug or power cable.

If the supply cord is damaged, it must be replaced by the

manufacturer, his service agent or similarly qualified

persons in order to avoid a hazard.

Defective power cables pose a serious health risk!

•Keep your hands away from the cutting head. Do not

reach into the area between the power tool and the

workpiece. Do not rest your hands near the power tool.

Risk of injury upon contact with the blade.

•Do not treat the surface to be processed with liquids

containing solvents. Toxic fumes may be produced

during scraping owing to the heat-up of the materials.

•Use appropriate detection equipment to track down

concealed supply lines or consult the local utility

companies. Contact with electrical lines may result in fire

and electric shock. Damaging a gas line may lead to an

explosion. Penetrating a water line causes property

damage and may cause an electric shock.

•Use sharp blades only.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PPLS10-750 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PPLS10-750

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info