Bedienungsanleitung Trotec PSCS11 - 12V (Seite 14 von 18) (Englisch)

689482

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

13 EN

cordless drill driver PSCS 11-12V

Switching the device on and off

The device has an infinitely variable speed control. The more

firmly you push the on/off switch(14), the higher is the speed.

1. Check whether the tool clamped in and the torque setting

selected are suitable for the intended application.

2. Check whether the workpiece is secured and the worktop

prepared correspondingly.

3. Press and hold the on/off switch(14) during screwing or

drilling.

ð The device operates with the previously selected

settings.

ð The LED work lamp(15) is illuminated.

4. Let go of the on/off switch(14) to stop the device.

ð The LED work lamp(15) turns off.

Info

The motor has an integrated brake that quickly stops

the motor once you let go of the on/off switch(14).

Shutdown

1. Set the switch for clockwise/counter-clockwise rotation(5)

to centre position(lock).

2. If required, allow the device to cool down.

3. Remove the battery from the device (see Start-up chapter).

4. Remove the tool from the device (see Start-up chapter).

5. Clean the device according to the Maintenance chapter.

6. Store the device according to the Storage chapter.

Available accessories

Warning

Only use accessories and additional equipment

specified in the operating manual.

Using insertion tools or accessories other than those

specified in the operating manual may cause a risk of

injury.

Accessories Article number

Spare battery PSCS 11-12V 6.200.000.102

Screw bit set, 32-piece 6.200.001.001

Wood drill bit set, 15-piece 6.200.001.101

Metal drill bit set HSS,

15-piece

6.200.001.131

Errors and faults

The device has been checked for proper functioning several

times during production. If malfunctions occur nonetheless,

check the device according to the following list.

Troubleshooting tasks which require the housing to be opened

must only be carried out by an authorized specialist electrical

company or by Trotec.

Slight smoke or odour are emitted during first use:

• This is not a fault. These phenomena disappear after a

brief runtime.

The battery does not charge:

• Check whether the battery is correctly connected to the

quick charger.

Slide the battery into the quick charger in a way that the

battery terminals engage in the quick charger. The battery

must lock in place in the quick charger.

• Check the power connection.

• Check the power cable and mains plug for damages.

• Check the fuse (home).

• Check the quick charger for damages. Should the quick

charger be damaged, stop using it. Contact the Trotec

customer service.

• Check the battery terminals for dirt. Remove any dirt.

• The battery might be defective and have to be replaced.

Only use batteries of the same type.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PSCS11 - 12V Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PSCS11 - 12V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info