Bedienungsanleitung Trotec PWLS 06-10 (Seite 3 von 10) (Englisch)

753925

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

EN 3

LED work lamp PWLS 05-10 / PWLS 06-10

General Power Tool Safety Warnings– Electrical

safety

•Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodified plugs and

matching outlets will reduce risk of electric shock.

•Avoid body contact with earthed or grounded surfaces,

such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is

earthed or grounded.

•Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

•Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away

from heat, oil, sharp edges or moving parts. Damaged

or entangled cords increase the risk of electric shock.

•When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

•If operating a power tool in a damp location is

unavoidable, use a residual current device(RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

General Power Tool Safety Warnings– Power tool

use and care

•Do not force the power tool. Use the correct power tool

for your application. The correct power tool will do the

job better and safer at the rate for which it was designed.

•Do not use the power tool if the switch does not turn it

on and off. Any power tool that cannot be controlled with

the switch is dangerous and must be repaired.

•Store idle power tools out of the reach of children and

Do not allow persons unfamiliar with the power tool or

these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

•Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage of

parts and any other condition that may affect the

power tool's operation. If damaged, have the power

tool repaired before use. Many accidents are caused by

poorly maintained power tools.

•Use the power tool, accessories and tool bits etc. in

accordance with these instructions, Take into account

the working conditions and the work to be performed.

Use of the power tool for operations different from those

intended could result in a hazardous situation.

•Keep handles and grasping surfaces dry, clean and

free from oil and grease. Slippery handles and grasping

surfaces do not allow for safe handling and control of the

tool in unexpected situations.

General Power Tool Safety Warnings– Battery tool

use and care

•Recharge only with charger specified by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of fire when operated with

another battery pack.

•Keep the USB inputs closed with the rubber side cover

to prevent them from contamination. If you do not follow

this advice and the USB inputs become contaminated, it

might not be possible to plug in the USB charging cable.

•Follow all charging instructions and do not charge the

battery pack or tool outside the temperature range

specified in the instructions. Charging improperly or at

temperatures outsides the specified range may damage

the battery and increase the risk of fire.

•Keep charger and USB charging cable clean.

Contamination entails a risk of electric shock.

•Do not operate the charger on highly combustible

ground (e.g. paper, textiles etc.) or in an inflammable

environment. The heat generated by the charger during

charging entails a risk of fire.

•Only use the supplied USB charging cable by Trotec for

the devicePWLS 06-10. Do not use any other USB cables.

General Power Tool Safety Warnings– Service

•Have your power tool serviced by a qualified repair

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

Intended use

Use the devices PWLS 05-10 and PWLS 06-10 according to the

technical data and only for a temporary illumination of indoor

and outdoor areas, e.g. for construction sites.

Foreseeable misuse

Any other use than the one described in the chapter "Intended

use" is regarded as reasonably foreseeable misuse.

Personnel qualifications

People who use this device must:

• have read and understood the instructions, especially the

Safety chapter.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PWLS 06-10 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PWLS 06-10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info