753928
6
Zoom out
Zoom in
Vorherige Seite
1/9
Nächste Seite
6 EN
LED construction site spotlight PWLS 10-150
Start-up
Unpacking the device
Take the device out of the packaging.
Warning of electrical voltage
Electric shock from insufficient insulation.
Check the device for damages and proper functioning
before each use.
If you notice damages, no longer use the device.
Do not use the device when the device or your hands
are damp or wet!
Check the contents for completeness and look for
damages.
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Dispose of the packaging material according to the
national regulations.
Putting the device into operation
Warning of hot surface
Some parts of this product can become very hot and
cause burns. Particular attention has to be given where
children and vulnerable people are present!
Warning of electrical voltage
Do not touch the device's power cable or power cable
connection with wet or damp hands.
Warning of electrical voltage
Do not touch the device's power cable or power cable
connection with wet or damp hands.
Warning
Do not look directly into the LEDs! The optical radiation
can be harmful for your eyes.
Adjusting the lighting position
Please proceed as follows to adjust the lighting position:
1. If necessary, switch the device off by setting the on/off
switch(7) to positionO.
2. Allow the device to cool down and remove the mains plug
from the mains socket.
3. Loosen the locking screw(3) on both sides of the device by
turning in counter-clockwise direction.
4. Rotate the surface LED(2) to the desired position.
2
3
5. Tighten the locking screw(3) on both sides of the device.
6. Loosen the surface LED(2) together with the outer frame
by turning the central locking screw(5) in counter-
clockwise direction.
ðYou can now rotate the surface LED(2) together with
the frame in both directions.
2
5
Info
The transport handle of the LED construction site
spotlight and the surface LED can be rotated by up
to 360°.
7. Lock the new position of the surface LED(2) by turning the
central locking screw(5) in clockwise direction.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Trotec PWLS 10-150 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Trotec PWLS 10-150

Trotec PWLS 10-150 Bedienungsanleitung - Deutsch - 9 seiten

Trotec PWLS 10-150 Bedienungsanleitung - Holländisch - 9 seiten

Trotec PWLS 10-150 Bedienungsanleitung - Französisch - 10 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info