Bedienungsanleitung Trust SP-6350X 5.1 Surround Speaker Set (Seite 1 von 18) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

462732

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

SP-6350X 5.1 Surround Speaker Set

…

Introduction

This manual is intended for users of the ‘TRUST 4500P 5.1 HOME THEATRE SYSTEM‘. The speaker

can be used with the 5.1 plug of your computer, but is also suitable for use in combination with your

DVD player.

This speaker set includes a powerful sub-woofer (for the bass tones), perfect satellites for the higher

tones, and a separate amplifier to control the speakers.

This product complies with all essential demands and with the other relevant stipulations of the valid

European directives. The Declaration of Conformity (DoC) is available on www.trust.com/13735/ce.

Safety

1. Remove the power plug from the wall socket before cleaning the speaker set. Do not use any

liquid cleaners or spray cans. Wipe the loudspeaker set clean with a moist cloth.

2. Never use the loudspeaker set in the vicinity of water.

3. Ensure that no objects or furniture stand on the power cord. Do not place the loudspeaker set

where the power cord may become worn.

4. Never insert any object, of any kind, into any of the openings in the loudspeaker casings.

5. Do not attempt to repair the speaker set yourself. The set should only be maintained by qualified

personnel.

Connections (see figure 1)

NOTE: There are two types of audio cables included with this audio set. Consult the handbook for your

sound source (DVD player, sound card) for the connecting cables you should use.

1. Connect the audio cable to the output connectors of the sound source.

2. Connect the other end of the audio cables to the “5.1 Audio input” of the amplifier.

In the event you are only using stereo: Connect the cable to “Stereo / Front “L/R”.

3. Connect the foremost loudspeakers to FL (left) and FR (right).

Connect the rearmost loudspeakers to RL (left) and RR (right).

Connect the sub-woofer to the connector “Sub” and the center loudspeaker to “Center”.

4. Connect the low-tension plug from the sub-woofer to the socket “POWER IN”.

5. Lastly, plug the power cord into the wall socket.

Operation

Before you turn the speaker set on, turn the volume control completely to the left, so that the sound is

off. This avoids possible damage to the unit, and your ears. The control knobs for Front, Rear, Center

and Sub volume can all be set to a neutral position.

1. Switch the speaker set on (knob 1, figure 2). The lamp (1, figure 2) will light up.

2. Have an audio signal play back from the sound source, e.g. by playing an MP3. Ensure that the

audio settings of your sound source are correct (consult the manual for the sound source).

3. Adjust the volume using the volume knob (3, figure 2).

4. Using the volume knobs Front, Rear, Center and Sub, you can adjust the sound level across the

speakers to suit your preference.

Troubleshooting

Problem Cause Possible solution

Audio cable(s) not

correctly connected to

the sound source.

Check that the audio cable(s) is/are correctly

connected to the sound source and the amplifier.

Check that the low-tension connector is correctly

plugged into the “POWER IN” socket.

Power not connected

properly.

Check that the main power cord is correctly plugged

into the wall socket, and that the power socket is

switched ON.

No sound

from the

speakers

Master Volume knob is

set too soft.

Set the Master Volume harder.

Loudspeaker system

switched off.

Turn the loudspeaker system on.

Audio balance

is not good

The volume setting per

channel is correct.

Set the right audio balance to suit your preference

using the volume knobs Front, Rear, Center and

Sub.

Sound can

only be heard

from the

foremost

loudspeakers

The sound source is

adjusted to generate

only stereo sound.

Consult the manual for the sound source on how to

generate a 5.1 audio signal.

Sound source does not

support 5.1

Use a decoder.

Problem not

in this list.

Latest FAQ update

available on internet.

Go to

www.trust.com/13735 for FAQ and other

product information.

If, after having attempted all these solutions, you still have problems, please make contact with one of

the Trust Customer Care Centers. You should in any case have the following information ready: the

article number (in this case 13735) and a good description of exactly what is not working, and when.

Conditions of guarantee

- Our products carry a 2-year factory guarantee, starting on the date of purchase.

- In case of defect, return the product to your dealer with an explanation of the defect, proof of

purchase and all accessories.

- During the period of guarantee, you will receive back from your dealer a comparable model, when

this is available. Should this not be available, the product will be repaired.

- For missing components such as manual, software or other parts, please make contact with our

helpdesk.

- The guarantee ceases to apply in the event of tampering with a product, mechanical damage,

misuse, modifications to the product, repair by third parties, carelessness and using the product for a

purpose other than the intended.

- Exclusions to the guarantee

• Damage caused by accidents or disasters, such as fire, flood, earthquake, war, vandalism or

theft.

• Incompatibility with other hardware/software which are not mentioned in the minimum system

demands.

• Accessories such as batteries and fuses (as applicable).

- On no account is the manufacturer responsible for any incidental or consequential damage,

including loss of income or other commercial losses, arising from the use of this product.

Trust SP-6350X 5.1 Surround Speaker Set Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info