548099
3
Zoom out
Zoom in
Vorherige Seite
1/82
Nächste Seite
3
Cross Trainer
Assembly instructions
Step 1: Rear Rail and Pedal Tube Assembly
1. Slide the rail assembly (2) under the rear support
tube of the main body. Bolt the two together with two
3/8” x 2-1/4” bolts (97) and 3/8” washers (100)
from the top of the tube, and four 3/8” x 3-3/4”
bolts (98) and 3/8” curved washers (99) through the
front of the support tube. Make sure all six bolts are
tightened very securely.
2. Attach the two foot pedals (52 left & 53 right) to the
pedal mounting plates with eight M5 x 10mm
Phillips head screws (112).
3. Assemble the inner pedal tube assemblies (5 & 6) to
the crank axles of the main body. The bearings in the
pedal tubes should slide onto the axles, do not force
them because damage to the bearings can occur.
The pedal tubes have been previously assembled at
the factory to assure the correct fi t. Secure the pedal
tubes with two 5/16” x 18mm bolts (111) and
5/16” washers (84).
1.
4. Install the two covers (50 right, 49 left) over the
pedal tube connection at the axle with two M6 x
15mm Phillips head screws (94). Install the two
roller covers (54) with four M5 x 12mm Phillips
head screws (77).
5. Install the four mounting brackets (17) and (26) to
the rails with four 5/16” x 3/4” socket hex head
bolts (75). Install the two steel covers (15 right &
16 left) by lifting the pedal tubes so the wheels
are off the tracks then slide the pedal tubes,
wheels fi rst, through the opening of the steel cover.
Align the cover with the mounting brackets and
secure them with eight M5 x 12 mm Phillips head
screws (77). Install the four small covers (2 x #19
& 2 x #20) with twelve M5 x 12mm Phillips head
screws (77).
6. Install the centre aluminium step rail (72) with
two 3/8” x 3-3/4” bolts (98) and 3/8” curved
washers (99) at the rear and two 3/8” x 2-1/4”
bolts (97) and 3/8” x 19mm fl at washers (100)
at the front. Install the two support tube covers (67
left & 68 right) with two M5 x 12mm Phillips head
screws (77).
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Tunturi Platinum Crosstrainer wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info