Bedienungsanleitung Turbotronic T-SB68 (Seite 2 von 2) (Englisch)

808771

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

How to

Use the

Odor Filter

*if provided with

your model

General

Trouble-

shooting

Steps

The touchless sensor operation promotes a germ-free environment. The lid sensor uses

invisible and harmless, patented infrared technology for accurate and responsive lid open and

close operation. There are two buttons on the front of the lid, “OPEN” and “CLOSE”, to open

and close the lid manually, and an ON/OFF power switch on the back of the trash can lid. The

infrared sensor on the lid will automatically open the lid when your hand or object is within 6

inches/10 cm of the sensor. The lid will remain open if the sensor detects any object within its

radius and will automatically close in 4 seconds after the object is withdrawn.

                  

1. When there is an object in the Sensor Zone, the LED Indicator Light will remain green and

the Lid will remain open until object is removed from the sensor zone.

indicate that the lid will close in 6 seconds.

red, the light will turn solid green again and the Lid will remain open.

About your

ibin

Trash Can

Some models of the Touchless Trash Can are equipped with an Odor

Filter Compartment that houses the odor-neutralizing Activated

Carbon Odor Filter. One (1) replaceable Odor Filter is pre-installed

inside the Odor Filter Compartment. Please follow these instructions

upside down.

2. Slide Odor Filter Compartment (Fig.1) to the right (Fig.2) to remove.

3. Remove Activated Carbon Odor Filter from the Compartment.

4. Remove new Odor Filter pouch from plastic bag (Do NOT cut open

the Odor Filter pouch).

5. Insert new Odor Filter pouch (Fig.3) into the Compartment.

6. Return the Odor Filter Compartment to Lid Cover (Fig.1) and slide

to the left (Fig.2) to lock the Odor Filter Compartment in position.

7. Replace Odor Filter every 3 months or when odor becomes too

strong.

the sensor area with a soft damp cloth and dry it immediately with a soft dry cloth.

Re-insert batteries or plug in AC adapter (DO NOT USE battery and AC adapter at the

same time).

2. Place trash can in an open area where nothing is blocking or within 10 inches of the

sensor eye. Make sure no sunlight or direct light shines on the sensor. Turn on the power

and try opening lid again.

3. If trash can is still not working correctly, remove the batteries or AC adapter. Let trash

can sit for at least 2 hours to reset. Try opening lid after reset.

Trouble-

shooting

Operating

Instructions

1. Remove Lid Unit from the trash can. Open battery compartment cover to insert 4 "D" size

batteries. Replace cover.

2. Insert one 13 gallon to 18 gallon trash bag through Trash Bag Retainer Ring and wrap the

top part of the bag over the Ring (STEP 1 in How To Use The Trash Bag Retainer Ring ). Put

the Ring onto the top edge of the can body (STEP 2).

3. Place Lid Unit onto the can body and make sure it is securely attached.

4. Turn on the power switch on the back of Lid Unit . A red Indicator Light will turn on for 3

5. Place hand or any object 6 inches above Infrared Sensor on the front of Lid Unit to open.

When there is an object in the Sensor Zone, the LED Indicator Light will remain green and

the Lid will remain open until object is removed from the Sensor Zone. Once item is

lid will close in 6 seconds. If an object is placed back into the Sensor Zone when the LED

open.

6. If you press the open button, Lid will open, and remain open for 5 minutes before closing

automatically – unless you press the close button. The trash can will then resume

operating in automatic mode.

How To

Use The

Trash Bag

Retainer

Ring

STEP 

Place trash bag inside

trash can, then wrap the

top of the bag over Ring.

STEP 

Secure Ring onto the

edge of the can body.

• Sensor Trash Can Lid

• Brushed Stainless Steel Can Body

Contents

of the Box

• Trash Bag Retainer Ring

• User Manual Fig. 3

Fig. 2

Fig. 1

Problem Solution

1. The trash can is brand new,

and only works occasionally

2. The lid stays open or lid opens

and closes continuously

3. Grinding noise when the lid

opens/closes

4. The lid does not open/close

5. I wave my hand over the sensor

eye, but the lid does not open

doesn’t work regularly, try a new set of batteries. Then follow the General

Troubleshooting Steps .

another direction, and follow the General Troubleshooting Steps .

This can be caused by broken gears or lid hinge.

• Check for damage on the hinges that connect to the lid

• Follow the General Troubleshooting Steps

If you are using Batteries:

• Turn power switch to “ON" position to see if the indication light is visible

If you are using AC Power Adapter:

• Unplug the adapter and insert new alkaline batteries to see if the lid works

on battery

• If the lid works with batteries, the AC adapter may be broken

It is not a motion sensor. Hold your hand or object steadily (do not wave your hand)

within 4-6 inches over sensor eye for it to detect and open.

Important: Do not use batteries

and the AC power adapter at the

same time. It can only be

www.zline-world.com

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Turbotronic T-SB68 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info