Zoom out
Zoom in
Vorherige Seite
Nächste Seite
© 2013 Uniden America Corp. Printed in Vietnam
Ft. Worth, Texas U01UN530EZZ(0)
Accessory handset
and charger
If you purchased
model number...
You should have:
D1364 None
D1364-2 1 of each
D1364-3 2 of each
Not pictured:
x Rechargeable battery (BT-1021)
x Battery cover
x AC adapter (PS-0035)
x Telephone cord
Not pictured:
x Rechargeable
battery (BT-1021)
x Battery cover
x AC adapter
You may also nd:What's in the box?
x If any items are missing or damaged, contact our Customer Care Line
immediately. Never use damaged products!
x Call waiting, CID, CIDCW, and Voice Mail are telephone line services. Contact your
provider for details.
x Need help? Get answers 24/7 at our website: www.uniden.com.
If You... Contact Uniden’s... Phone Number
have a question or problem Customer Care Line*
817-858-2929 or
need a part or an accessory Parts Department* 800-554-3988
need special assistance due to
a disability
Accessibility Help Line
(voice or TTY)
* During regular business hours, Central Standard Time; see our website for detailed
business hours.
D1364 base
with Caller ID
and cordless
D1361/D1364 Series User's Guide

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.


Inhalt der Seiten

  • Page 1

    D1361/D1364 Series User's Guide
    What's in the box?

    You may also find:
    Accessory handset
    and charger

    D1364 base
    with Caller ID
    and cordless

    Not pictured:
    xxRechargeable battery (BT-1021)
    xxBattery cover
    xxAC adapter (PS-0035)
    xxTelephone cord

    Not pictured:
    battery (BT-1021)
    xxBattery cover
    xxAC adapter
    If you purchased
    model number...

    You should have:
    1 of each
    2 of each

    xx If any items are missing or damaged, contact our Customer Care Line
    immediately. Never use damaged products!
    xx Call waiting, CID, CIDCW, and Voice Mail are telephone line services. Contact your
    provider for details.
    xx Need help? Get answers 24/7 at our website: www.uniden.com.
    If You...

    Contact Uniden’s...

    have a question or problem

    Customer Care Line*

    need a part or an accessory
    Parts Department*
    need special assistance due to Accessibility Help Line
    a disability

    Phone Number

    817-858-2929 or
    (voice or TTY)

    * During regular business hours, Central Standard Time; see our website for detailed
    business hours.

    © 2013 Uniden America Corp.
    Ft. Worth, Texas

    Printed in Vietnam

  • Page 2

    What’s in the manual?
    Getting Started ............................ 3
    Installing Your Phone ................... 3
    Charge the Battery.......................3
    Connect the Telephone Cord.......3
    Test the Connection.....................3
    Changing from Tone to Pulse
    Getting to Know Your Phone ....... 4
    Base ............................................. 4
    Handset . ...................................... 4
    Reading the Display .................... 5
    Entering Text on Your Phone ....... 5
    Using the Menu ........................... 6
    Handset Setup Menu...............6
    Date & Time Menu...................6

    Global Setup Menu..................7
    Using Your Phone ........................ 7
    Basics ........................................... 7
    Changing the Volume...................7
    Using the Phonebook, Caller ID,
    and Redial Lists ......................... 7
    Adding Phonebook Entries...........8
    Deleting All the Entries.................8
    Chain Dialing................................8
    Using Call Waiting........................8
    Finding the Handset . ................... 9
    Voice Message Notification ......... 9
    Setting Up Voice Mail Access.......9
    Editing Your Voice Mail
    Troubleshooting ........................ 10

    Important Safety Instructions
    When using your telephone equipment, basic safety precautions should
    always be followed to reduce the risk of fire, electric shock and injury to
    persons, including the following:
    xx This unit is NOT waterproof. DO NOT expose it to rain/moisture.
    xx Do not use this product near water, for example, near a bath tub, wash bowl,
    kitchen sink or laundry tub, in a wet basement or near a swimming pool.
    xx Avoid using a telephone (other than a cordless type) during an electrical
    storm. There may be a remote risk of electric shock from lightning.
    xx Do not use the telephone to report a gas leak in the vicinity of the leak.
    xx Use only the power cord and batteries indicated in this manual. Do not
    dispose of batteries in a fire. They may explode. Check with local codes for
    possible special disposal instructions.
    xx Do not place the handset in any charging cradle without the battery installed
    and the battery cover securely in place.

    CAUTION! Risk of explosion if battery is replaced by an incorrect type.
    Dispose of used batteries according to the instructions. Do not open or
    mutilate the battery. Disconnect the battery before shipping this product.
    2 - English

  • Page 3

    Getting Started
    Installing Your Phone
    Charge the Battery
    1. Unpack the handset, battery pack, and battery
    cover. If you need to remove the cover, press in on
    the notch and slide the cover down and off.
    2. Line up the battery connector with the jack inside
    the handset; the connector only fits one way.
    3. Push the connector in until it clicks into place; tug gently on the wires to
    make sure the battery pack is securely connected.
    4. Replace the battery cover and slide it into place.
    5. Use the AC adapter to connect the power jack on the base to a regular
    indoor (120V AC) power outlet.
    6. Place the handset in the base with the display facing forward. If the display
    doesn’t light up, reseat the handset or connect the base to a different outlet.

    ## Charge the handset completely (about 15 hours) before using.
    Connect the Telephone Cord

    1. Use the telephone cord to connect the TEL LINE jack on the base to a
    standard telephone wall jack.

    ## If the display says Check TEL Line, check the connection between the
    base and the phone jack.
    2. If you are mounting the phone on the wall, place the mounting slots (on
    the rear of the base) over the pins on the wall plate; slide the base down to
    lock it into place.

    Test the Connection
    Make a quick test call. Pick up the handset and press Talk/flash. (Press End
    to hang up.)
    xx If there’s a lot of noise, check for interference (see p. 10).
    xx If you keep hearing a dial tone, change to pulse dialing (see below).

    Changing from Tone to Pulse Dialing
    Your phone uses tone dialing by default. If your phone company uses pulse
    dialing, you need to change your phone’s dial mode.
    1. Press Menu/select and select Global Setup.
    2. Select Dial Mode then Pulse. You’ll hear a confirmation tone.
    To send DTMF tones during a call (e.g., for an automated response system),
    press to temporarily switch to tone dialing. When you hang up, the phone
    automatically returns to pulse dialing.


    English - 3

  • Page 4

    Getting to Know Your Phone






    What it does
    xxIn standby: page the handset.

    Key (icon)


    Twelvekey dial








    What it does
    xxIn standby: increase the ringer volume.
    xxDuring a call: increase the volume.
    Up (
    xxIn any menu or list: move the cursor up one line.
    xxWhen entering text or numbers: erase the character at the
    cursor (press and hold to erase all characters).
    Phonebook/left xxIn standby or during a call: open the phonebook.
    ( )
    xxIn the menu: go back to the previous screen.
    xxIn standby: start a telephone call (get a dial tone).
    xxDuring a call: switch to a waiting call.
    xxIn standby: open the redial list.
    xxWhile entering a phone number: insert a 2-second pause.
    xxDuring a call: mute the microphone.
    xxWhile the phone is ringing: ignore this call (mute the
    4 - English

  • Page 5

    Key (icon)
    Caller ID/right
    Down (




    What it does
    xxIn standby: open the menu.
    xxIn any menu or list: select the highlighted item.
    xxIn standby or during a call: open the Caller ID list.
    xxDuring a call: hang up.
    xxIn any menu or list: exit and go to standby.
    xxIn standby: decrease the ringer volume.
    xxDuring a call: decrease the volume.
    xxIn any menu or list: move the cursor down one line.
    ) xxIn standby: access your voice mail service.

    What it means
    xxOn: the battery is charging.
    xxBlinking: there are new messages.

    Reading the Display
    The icons appear based on what you're doing with the phone.

    What it means
    You have a voice mail


    What it means
    The battery is 1) fully
    charged, 2) half charged,
    3) getting low, or 4)
    T-coil mode is on (see p. 6).
    The ringer is turned off and
    Enter 1) capital or 2) lower
    [Aa] [aA]
    will not ring for new calls.
    case letters.

    Entering Text on Your Phone
    xx Use the 12-key dial pad anytime you want to enter text into your phone (e.g.
    a name in the phonebook).
    xx If two letters in a row use the same key, enter the first letter; wait for the
    cursor to move to the next space and enter the second letter.


    move the cursor left


    move the cursor right

    Caller id/right.

    erase the character at the cursor


    erase the entire entry

    and hold clear.

    enter a blank space

    English - 5

  • Page 6



    switch between upper and lower case letters


    rotate through the punctuation and symbols


    Using the Menu
    Press MENU/SELECT to
    open the menu.

    Handset Setup
    Date & Time


    go back a screen
    press END to exit
    the menu.

    Press MENU/SELECT to choose
    the current option.

    xx If you don't press any keys
    for about thirty seconds, the
    handset exits the menu.

    Handset Setup
    Handset Setup
    Use UP and DOWN to
    Tones Setup
    rotate through the Ringer Handset
    Auto Talk

    Handset Setup Menu
    Menu Option

    What it does
    Reduce noise on hearing aids equipped with a telecoil
    (T-coil) feature. It shortens talk time, so keep your battery
    fully charged.
    Choose the handset's ring tone. As you highlight each ring
    Ringer Tones
    tone, you hear a sample. To confirm, press Menu/select.
    Have the handset answer a call when you pick it up from
    the cradle (without pressing any buttons).
    Have the handset answer a call when you press any key on
    Any Key Answer
    the 12-key dialpad.
    Change the name used in the handset’s display.
    Handset Language Change the display language.
    Key Touch Tone
    Have the keypad sound a tone when you press a key.

    Date & Time Menu
    Use this menu to set the clock (if you have Caller ID, the phone sets date and time
    automatically). Enter the date and time; select AM or PM. Use Caller ID/right
    to move the cursor past a digit without changing it. To confirm, press Menu/

    6 - English

  • Page 7

    Global Setup Menu
    Menu Option
    Dial Mode
    Edit Voice Mail
    VMWI Reset

    What it does
    Choose tone or pulse dialing (see p. 3).
    Program your voice mail access number so you can get
    messages by pressing one button (see p. 9).
    Reset the Visual Message Waiting Indicator (see p. 9).

    Using Your Phone
    make a call, dial the number, and
    answer a call
    hang up
    ignore a call (mute the ringer)
    mute the microphone during a call

    End or put the handset in the cradle.
    Mute while the phone is ringing.
    Mute. (Press again to turn it back on.)

    Changing the Volume
    You can adjust the volume of the earpiece and ringer separately.
    To change the... When...
    earpiece volume you are on a call
    Up to increase the volume or
    Down to decrease it.
    ringer volume * the phone is in standby
    * To turn off the ringer, turn the ringer volume all the way down.

    Using the Phonebook, Caller ID, and Redial Lists
    xx The phone can store up to 30 entries in its phonebook.
    xx If you subscribe to Caller ID (CID) service, the phone stores the information
    for the last 30 received calls to the CID list. Contact your telephone provider
    for more information.
    xx The handset remembers the last 5 numbers you dialed on it.
    Phonebook/left, Caller ID/right, or
    open the list
    scroll through the list
    Up or Down.
    dial the current entry
    English - 7

  • Page 8



    add 1 at the front of CID number

    * before dialing for a toll call.

    add the area code
    store the current CID or redial entry
    to the phonebook
    edit the current phonebook entry
    delete the current entry
    close the list

    # before dialing.

    Menu/SELECT, then select Store Into PB.
    Proceed to edit the name and number.
    Menu/select, then select Edit.
    Menu/select, then select Delete (or
    Delete Entry). To confirm, select Yes.

    ## When it’s in standby, the handset shows how many calls came in
    since the last time you checked the CID list.
    Adding Phonebook Entries
    With the phone in standby, open the phonebook. Press Menu/select and then
    select Create New. Proceed to enter a name and number.
    xx Enter the phone number (up to 20 digits) exactly as you would dial it.
    xx If you need to enter a pause between the numbers, press Redial/pause; you’ll
    see a P in the display. (The dialing will pause for about 2 seconds per a digit.)
    xx To edit the number, press Clear to back up the cursor and delete numbers.
    Re-enter the correct numbers.

    Deleting All the Entries
    With the phone in standby, open the list (phonebook, CID, or redial). Press Menu/

    select and then select Delete All. To confirm, select Yes.

    Chain Dialing
    If you often have to enter a series of digits or a code number during a call,
    you can save that code number as a regular phonebook entry and use the
    phonebook to send the code number.
    Make a call normally. When you hear the prompt that asks you to enter your
    number, open the phonebook and find the entry. Press Menu/select to send
    the code. If you change your mind, just close the phonebook.

    Using Call Waiting
    xx Call Waiting, a service available from your telephone provider, lets you
    receive calls while you are on another call. Caller ID on Call Waiting
    (CIDCW) service displays Caller ID information for a waiting call.
    xx If you get a Call Waiting call, the phone sounds a tone. Press Talk/flash to
    switch between the current call and the waiting call; each time you switch,
    there is a short pause before you’re connected to the other caller.
    8 - English

  • Page 9

    Finding the Handset
    With the phone in standby, press Find on the base. The handset will beep for 1
    minute. To cancel, press Find again or press any handset key.

    Voice Message Notification
    If you subscribe to a voice mail service, your phone displays the voice
    mail icon (
    ) when you have a new message. After you listen to your
    messages, the message icon turns off. If it doesn’t, you can reset it: With the
    phone in standby, open the menu and select Global Setup; select VMWI Reset,
    then select Yes.

    Setting Up Voice Mail Access
    If you have voice mail access through your service provider, you can program
    that access number into your phone and then just press one key to dial MESSAGES. You will set up an access code to your account, and you can
    either enter that manually after you have accessed the voice mail or you can
    program that into your phone, too.
    1. Press MESSAGES. If no voice mail access number has been set up, the system
    prompts you to do that now. (You can add the access number later; press
    Menu/Select then Global Setup/Edit Voice Mail.)
    2. Enter the provider’s voice mail access number. Press Menu/Select to set the
    3. The screen displays Done! and returns to the Global Setup menu.
    4. To access your provider’s voice mail service now, press MESSAGES. The
    system will dial the voice mail service and you can enter your security code
    manually when prompted.

    Editing Your Voice Mail Number
    You can add your voice mail security code to the voice mail number string.
    1. Press Menu/SelecT, then scroll to Global Setup/Edit Voice Mail.
    2. Enter your voice mail number again, then press Redial/Pause twice to enter
    a 4-second pause. Next, enter your security code.
    3. Press Menu/Select when you are finished. The system displays Done! and
    returns to the Global Setup menu.
    4. To access your provider’s voice mail service now, just press MESSAGES.
    The system will dial the access number, wait 4 seconds, and then dial the
    security code.

    English - 9

  • Page 10

    I can’t make or receive
    The handset won’t ring.
    The handset is not
    The handset won’t display
    CID information.
    I hear a beeping during
    a call.

    There’s a lot of noise or
    static on the line

    Possible solutions
    xxCheck the telephone cord connection.
    xxDisconnect the base AC adapter. Wait a few minutes,
    then reconnect it.
    xxMake sure the base is plugged in.
    xxMake sure the ringer is turned on.
    xxCharge the battery for 15-20 hours.
    xxCheck the battery connection.
    xxLet calls ring twice before answering.
    xxMake sure your CID service is active.
    xxThe battery is getting low. Check the handset for a low
    battery alert. Finish your conversation and return the
    handset to the cradle as soon as possible.
    xxCheck for interference from appliances (microwave
    ovens, TVs, etc.) or wireless devices (baby monitors,
    WiFi equipment, etc.). Move the handset or base away
    from the interference source.
    xxMove the handset closer to the base.
    xxTurn the T-coil on for telecoil hearing aids (see p. 6).

    Installing a Line Filter or DSL
    xx A telephone line filter or DSL filter
    prevents services that use the phone
    line from causing interference on
    your phone. To get a line filter,
    contact your service provider or
    look in an electronics store.
    xx Plug the filter into the telephone
    wall jack and plug the base into the
    filter. Make a test call to make sure
    the noise is gone.

    Liquid Damage
    CAUTION: If the base is covered in
    liquid, disconnect the adapter and
    phone cord from the wall before
    touching it.
    10 - English

    If the liquid is only on the exterior
    housing of the base or handset, wipe
    it off and use as normal. If you can
    hear liquid inside the housing:
    1. Remove all compartment covers,
    and disconnect all cables and
    2. If liquid is leaking from any vent
    or hole, turn the phone so that
    vent faces down. If not, place the
    largest vent face down.
    3. Let dry for at least 3 days. Check
    for liquid inside the phone before
    replacing compartment covers
    and reconnecting cords.

  • Page 11

    Adapter and Battery Information
    AC adapter
    Part number
    Input voltage
    Output voltage

    120V AC, 60 Hz
    8V AC @ 300mA

    Battery pack (with normal use)
    Part number
    300mAh, 2.4V DC
    Talk time
    about 7 hours
    Standby time
    about 6 days
    Battery life
    about 1 year
    xx Use only the supplied AC adapter.
    xx Use the proper adapter for the base.
    xx Do not place the unit in direct
    sunlight or subject it to high
    xx Replace the battery when the talk
    or standby time becomes noticeably
    reduced. For replacements, call the
    Parts Department (see the front
    xx When the battery gets low, the
    handset beeps or shows a low
    battery alert; put the handset in the
    cradle for recharging.

    Rechargeable Battery Warning
    xx This equipment contains a rechargeable
    Nickel-Metal-Hydride (Ni-MH) battery.
    xx Nickel is a chemical known to the state of
    California to cause cancer.
    xx Do not short-circuit the battery.
    xx The batteries in this equipment may explode
    if disposed of in a fire.
    xx Do not charge the batteries in any charger
    other than the one specified in the owner’s
    manual. Using another charger may damage
    the battery or cause it to explode.

    xx As part of our commitment to protecting our
    environment and
    conserving natural
    resources, Uniden
    voluntarily participates in
    an RBRC® industry
    program to collect and
    recycle used Ni-MH
    batteries within the
    United States. Please call
    1-800-8-BATTERY for information on
    Ni-MH battery recycling in your area.
    (RBRC® is a registered trademark of the
    Rechargeable Battery Recycling
    Rechargeable batteries must be recycled
    or disposed of properly.
    Warning! The cords on this product and/
    or accessories contain lead, a chemical
    known to the state of California to cause
    birth defects or other reproductive harm.
    Wash hands after handling.
    Uniden works to reduce lead content in
    PVC coated cords in our products and

    Compliance Information
    FCC Part 68 Information
    This equipment complies with Part 68 of
    the FCC rules and the requirements adopted
    by the ACTA. On the bottom of this
    equipment is a label that contains, among
    other information, a product identifier in
    the format US: AAAEQ##TXXXX. If
    requested, this number must be provided to
    the phone company.
    An applicable Universal Service Order
    Codes (USOC) certification for the jacks
    used in this equipment is provided (i.e.,
    RJ11C) in the packaging with each piece
    of approved terminal equipment. A plug
    and jack used to connect this equipment to
    the premises wiring and telephone network
    must comply with the applicable FCC
    Part 68 rules and requirements adopted by
    the ACTA. A compliant telephone cord
    and modular plug is provided with this
    product. It is designed to be connected
    to a compatible modular jack that is also

    English - 11

  • Page 12

    compliant. See installation instructions for
    The REN is used to determine the number
    of devices that may be connected to a phone
    line. Excessive RENs on a phone line may
    result in devices not ringing in response
    to an incoming call. In most but not all
    areas, the sum of RENs should not exceed
    five (5.0). To be certain of the number of
    devices that may be connected to a line,
    as determined by the total RENs, contact
    the telephone provider. The REN for this
    product is part of the product identifier that
    has the format US:AAAEQ##TXXXX.
    The digits represented by ## are the REN
    without a decimal point (e.g., 03 is a REN
    of 0.3).
    If this equipment causes harm to the
    telephone network, the telephone company
    will notify you in advance that temporary
    discontinuance of service may be required.
    But if advance notice isn't practical, the
    telephone company will notify the customer
    as soon as possible. Also, you will be
    advised of your right to file a complaint
    with the FCC if you believe it is necessary.
    The telephone company may make changes
    in its facilities, equipment, operations or
    procedures that could affect the operation
    of the equipment. If this happens the
    telephone company will provide advance
    notice in order for you to make necessary
    modifications to maintain uninterrupted
    Please follow instructions for repairing,
    if any (e.g. battery replacement section);
    otherwise do not substitute or repair any
    parts of the device except as specified in this
    manual. Connection to party line service
    is subject to state tariffs. Contact the state
    public utility commission, public service
    commission or corporation commission for
    information. This equipment is hearing aid
    If you experience trouble with this
    equipment, contact the manufacturer or
    an authorized agent. If the equipment is
    causing harm to the telephone network, the
    telephone company may request that you
    disconnect the equipment until the problem
    is resolved.

    12 - English

    If your home has wired alarm equipment
    connected to a phone line, be sure that
    installing the system does not disable your
    alarm equipment. If you have questions
    about what will disable alarm equipment,
    contact your telephone company or a
    qualified installer.
    Any changes or modifications to this
    product not expressly approved by the
    manufacturer or other party responsible for
    compliance could void your authority to
    operate this product.
    NOTICE: According to telephone company
    reports, AC electrical surges, typically
    resulting from lightning strikes, are very
    destructive to telephone equipment
    connected to AC power sources. To
    minimize damage from these types of
    surges, a surge arrestor is recommended.

    FCC Part 15 Information
    This device complies with part 15 of the
    FCC rules. Operation is subject to the
    following two conditions: (1) This device
    may not cause harmful interference, and (2)
    This device must accept any interference
    received, including interference that may
    cause undesired operation. Privacy of
    communications may not be ensured when
    using this phone.
    FCC PART 15.105(b): Note: This
    equipment has been tested and found to
    comply with the limits for a Class B digital
    device, pursuant to part 15 of the FCC
    Rules. These limits are designed to provide
    reasonable protection against harmful
    interference in a residential installation.
    This equipment generates, uses and can
    radiate radio frequency energy and, if not
    installed and used in accordance with the
    instructions, may cause harmful interference
    to radio communications. However, there
    is no guarantee that interference will not
    occur in a particular installation. If this
    equipment does cause harmful interference
    to radio or television reception, which can
    be determined by turning the equipment
    off and on, the user is encouraged to try to
    correct the interference by one or more of
    the following measures:
    xx Reorient or relocate the receiving antenna.

  • Page 13

    xx Increase the separation between the
    equipment and receiver.
    xx Connect the equipment into an outlet on
    a circuit different from that to which the
    receiver is connected.
    xx Consult the dealer or an experienced radio/
    TV technician for help.

    RF Exposure Information
    This product complies with FCC radiation
    exposure limits under the following
    xx The base must be placed to allow a
    minimum of 20 cm (8 inches) between the
    antenna and all persons during normal
    xx The base must not be collocated or operated
    in conjunction with any other antenna or
    xx The handset is designed for body-worn
    operation and meets FCC RF exposure
    guidelines when used with any belt clip,
    carrying case, or other accessory supplied
    with this product. (All necessary accessories
    are included in the package; any additional
    or optional accessories are not required
    for compliance with the guidelines.) Third
    party accessories (unless approved by the
    manufacturer) should be avoided as these
    might not comply with FCC RF exposure

    To return to normal operation, cycle
    the power for the base and remove and
    reinstall the handset battery.

    Industry Canada (I.C.) Notice
    Terminal equipment

    NOTICE: This equipment meets the
    applicable Industry Canada Terminal
    Equipment Technical Specifications. This
    is confirmed by the registration number.
    The abbreviation IC before the registration
    number signifies that registration was
    performed based on a Declaration of
    Conformity indicating that Industry Canada
    technical specifications were met. It does
    not imply that Industry Canada approved
    the equipment.
    NOTICE: The Ringer Equivalence Number
    (REN) for this terminal equipment is
    marked on the equipment itself. The REN
    assigned to each terminal equipment
    provides an indication of the maximum
    number of terminals allowed to be
    connected to a telephone interface. The
    termination on an interface may consist of
    any combination of devices subject only to
    the requirement that the sum of the Ringer
    Equivalence Numbers of all the devices
    does not exceed 5.

    Radio equipment

    The term IC before the radio certification
    number only signifies that Industry Canada
    technical specifications were met. Operation
    is subject to the following two conditions:
    D1364 Base
    (1) this device may not cause interference,
    and (2) this device must accept any
    1. Plug in the AC adapter.
    interference, including interference that may
    2. Immediately begin to press FIND HS
    cause undesired operation of the device.
    repeatedly on the base. All functions
    will be disabled after FIND HS is pressed "Privacy of communications may not be
    approximately 20 times in 15 seconds. ensured when using this telephone."

    Disable All Functions Except

    D1364 Handset

    Warranty (1 Year, Limited)

    1. Install the battery.
    2. Once Welcome, Please wait...
    disappears from the display, press and
    hold END, MENU, and * simultaneously.
    3. After about 5 seconds, a confirmation
    tone sounds, indicating all functions
    except charging have been disabled.

    Evidence of original purchase is required
    for warranty service.
    CORPORATION ("Uniden")
    warrants, for one year, to the original retail
    owner, this Uniden Product to be free from
    defects in materials and craftsmanship with

    English - 13

  • Page 14

    only the limitations or exclusions set out
    WARRANTY DURATION: This warranty
    to the original user shall terminate and
    be of no further effect 12 months after the
    date of original retail sale. The warranty
    is invalid if the Product is (A) damaged or
    not maintained as reasonable or necessary,
    (B) modified, altered, or used as part of
    any conversion kits, subassemblies, or
    any configurations not sold by Uniden,
    (C) improperly installed, (D) serviced
    or repaired by someone other than an
    authorized Uniden service center for a
    defect or malfunction covered by this
    warranty, (E) used in any conjunction
    with equipment or parts or as part of any
    system not manufactured by Uniden, or (F)
    installed or programmed by anyone other
    than as detailed by the owner's manual for
    this product.
    STATEMENT OF REMEDY: In the event
    that the product does not conform to this
    warranty at any time while this warranty is
    in effect, warrantor will either, at its option,
    repair or replace the defective unit and
    return it to you without charge for parts,
    service, or any other cost (except shipping
    and handling) incurred by warrantor or
    its representatives in connection with the
    performance of this warranty. Warrantor,
    at its option, may replace the unit with a
    new or refurbished unit. THE LIMITED

    14 - English

    DAMAGES. Some states do not allow
    this exclusion or limitation of incidental
    or consequential damages so the above
    limitation or exclusion may not apply to
    LEGAL REMEDIES: This warranty gives
    you specific legal rights, and you may also
    have other rights which vary from state
    to state. This warranty is void outside the
    United States of America and Canada.
    If, after following the instructions in the
    owner's manual you are certain that the
    Product is defective, pack the Product
    carefully (preferably in its original
    packaging). Disconnect the battery from the
    Product and separately secure the battery
    in its own separate packaging within the
    shipping carton. The Product should include
    all parts and accessories originally packaged
    with the Product. Include evidence of
    original purchase and a note describing the
    defect that has caused you to return it. The
    Product should be shipped freight prepaid,
    by traceable means, to warrantor at:
    Uniden America Service
    4700 Amon Carter Blvd.
    Fort Worth, TX 76155
    As an Energy Star®
    Partner, Uniden has
    determined that this
    product meets the
    Energy Star® guidelines
    for energy efficiency.
    Energy Star® is a U.S.
    registered mark.
    xx Uniden® is a registered trademark of Uniden
    America Corporation.
    xx The pictures in this manual are for example
    only. Your phone may not look exactly like
    the pictures.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.


Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Uniden D1364 series wenn:

Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.

Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Uniden D1364 series in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 0,84 mb groß.


Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.