484748
3
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
USB 1389 - 1390 - 1391 - 1392
Class-AB Power amplifiers
INTRODUCTION
Thank you for purchasing this US BLASTER Class AB full range amplifier for your car audio system.
Now you own an amplifier of uncompromising design and engineering incorporating the latest advan-
ced circuit technology.
You will soon discover the amplifiers’ optimum sound and reliable performance.
US BLASTER amplifiers are adopted by advanced craftsmanship using the highest quality components
and strict quality control system. In order to provide you with long and pleasureable listening, we
recommend that you have your amplifier installed by an authorized US BLASTER dealer. It will ensu-
re installing your product properly and will also increase the warranty to one year. (please see the
w
arranty section for more details.)
Please read this manual thoroughly to ensure you get the maximum benefit from this amplifier. When
installed properly, this unit will provide you years of trouble-free performance.
DESIGN FEATURES
SMD Hi-Fi audio components.
FR-4 heavy duty double side PCB.
Low ESR high capacitance filter capacitor.
Super noise rejection circuit.
Smart protection system against overload, short circuit, overheat and low voltage.
Gold plated heavyduty connectors.
Intergrated high performance filters.
AMPLIFIER FUNCTIONS
1. Speaker connection
• Nev
er connect the speak
er cables with the chassis ground. This could destory your amplifier
.
• Check that y
our speakers are connected correctly which means plus to plus and minus to minus.
We recommend speaker cable from 16 Gauge or up. Other connection ways are shown in the attach-
ment.
2. BATT+
Battery +(plus) terminal. The +(plus) 12 Volt power cable must be connected with a fuse on the bat-
tery +(plus) terminal. We recommenda fuse listed on pre-installation a 12 feet copper cable with 8
Gauge thickness or up
.
3. REM
R
emote terminal. The remote cable must be connected with the radio remote output
terminal so that the amplifier will switch on and off automatically with the r
adio. If there are two or
more amplifiers connected to this antenna terminal it might be necessary to add an additional relay.
Please consult y
our dealer
.
4. GND
Chassis ground terminal. The chassis ground cable must be connected v
ery tight on a nearb
y massi
-
v
e and electric conductiv
e place.
© US Blaster Europe BV
3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für US Blaster USB 1392 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info