484750
6
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
USB 4111
TFT LCD MONITOR
Installation of the headrest mainframe
© US Blaster Europe BV
Setup work
Remove the headrest and take the appropria-
te precautions to ensure that it is not damaged
during the installation.
Measurements
Push on the headrest with your fingers to
make sure there are no obstructions that
would hinder the installation. Use the paper
template to mark the area to be cut.
Cut the headrest
Using an adjustable-depth blade, start your
cut 1/4 inch inside one courner and cut diagon-
gonally across. Repeat the procedure for the
other two corners.
Remove foam & obstructions
Carefully peel back the headrest outer mate-
rial. Set the adjustable blade to one inch depth
and cut around the edges of the hole, staying
1/4 inch inside the edge. Pull up one corner of
the foam and use the blade to cut underneath.
Remove small sections at a time, using the pull
up and cut method for uniform depth. Use a
Dremel or other appropriate tool to remove
other obstructions. Insert the monitor to mea-
sure the fit and make adjustments if necessary.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für US Blaster USB 4111 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info