USB 7011
Professional 19” 4-Channel Mixer
OPERATION
(11,42,43,12)
CHANNEL 2: Switch allows you to select the PHONO
2/LINE 3 or the LINE 4 input. The CHANNEL SLIDE controls the input level of this channel.
(13,45,46,14)
CHANNEL 3: Switch allows you to select the PHONO 3/LINE 5 or the LINE 6 input. The CHANNEL
SLIDE controls the input level of this channel.
(15,47,48,40)
CHANNEL 4: Switch allows you to select the LINE 7 or the LINE 8 input.
(40)
The CHANNEL SLIDE controls the input level of this channel.
(18)
CROSSFADER SECTION: 1. The CROSSFADER allows the Mixing
of one source into another. The USB 7011 features an Assignable crossfader.
(17,19)
The ASSIGN switches allow you to Select which channel will play
(18)
The CROSSFADER in your unit is removable and if the need arises Can be easily replaced.
(23,24,25)
Master EQ: The master EQ allow you to adjust you output sound.
(51,52,53,24)
OUTPUT CONTROL SECTION: The level of the MAIN OUTPUT Is controlled by the MASTER .
(23)
The STEREO/MONO allow you to control the master signal stereo or mono model.
(25,50)
The BOOTH control
adjusts the level of the BOOTH OUTPUT .
HINT: The BOOTH OUTPUT is used by some DJs to run monitor speakers in their DJ Booth.
You can also use it as a second ZONE or AMP output.
(49)
NOTE: The REC OUTPUT has no level control. The Level is set by the channel slides of the
selected channel. The tonal qualities can be controlled by the equalizers.
(33,3126,27,28,29,30)
CUE SECTION: By connecting a set of headphones to the HEADPHONE jack, you can monitor any or
all of the channels. Press the MIX/SPLIT buttons for monitor the master output and the LED indica-
tor will glow, Pres it again for monitor channel input and the LED will be off, and then you can Pres
the BUTTONS to selector which channel you want to monitor and their respective LED indicators will
glow.
(32)
Use the CUE LEVEL
control to adjust the cue volume without Effecting the overall mix.
(34)
DISPLAY: The DISPLAY indicates either the MASTER output Left and right levels.
NOTE: This product is double insulated and not intended to be grounded.
© US Blaster Europe BV
