Bedienungsanleitung Uspeed Wifi repeater (Seite 9 von 10) (Englisch)

706169

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

- 16 -- 15 -

3. Temporarily change the IP address of your computer

From the IPv4 settings, switch to conﬁgure your IP

address manually.

Type in the following settings:

• IP address: 192.168.10.111

• Subnet mask: 255.255.255.0

• Default gateway/Router: 192.168.10.1

• Note: Do not change DNS settings

Click “OK” and wait a few seconds to allow the new

settings to apply.

Step 1. Confirm Live Internet Connection

Please verify that your router or DSL modem is working

properly and that your existing devices can connect to

the Internet successfully.

Step 2. Select Repeater Location

Identify the wall socket where you would like to place

the repeater. Ensure your router / DSL modem is close

enough to connect to by cable.

Step 3. Connect Repeater to Network Socket

and Computer

1. Plug one end of your network cable into the router

network socket, and the other end into the port of the

repeater.

2. Plug the repeater into a wall socket; allow a 1-minute

start up time.

3. Connect your computer to the repeater wirelessly:

From your computer, view your available wireless

connections (typically accessible from the corner

of your desktop).

Choose the newly available “WiFi-Repeater”

network and connect. Note that no password is

needed at this time.

Step 4. Temporarily change the IP address

setting of your computer

1. Open the IP setting dialog on your computer

For PC users

Windows 7

Go to Start > Control Panel > Network & Sharing

Center > Change Adapter Settings (or Manage

Network Connections).

Windows XP

Go to Start > Control Panel > Network Connections.

Among the list of connections, right click

“Wireless Connection.”

Click “Properties” in the pop-up menu. The

“connection properties” window will appear.

In this window, double click “Internet Protocol

Version 4(TCP/IPv4).” The IP setting dialog will

appear.

Click the Wi-Fi icon from the top-right corner

of your desktop and choose “Open Network

Preferences.” The network conﬁguration window

will appear.

On the left of the window, select your Wi-Fi

connection. Then click “Advanced…” on the

lower right side.

Select the TCP/IP tab, and the IP setting page

will appear.

2. Record the current IPv4 settings before proceeding

Note: Computers are often set to “Obtain an IP

address automatically” via the DHCP setting. If it is

not, you need to write down the exact information of

your IP address, subnet mask and default gateway.

3. Click “Apply and Reboot,” then click “Yes.” Wait 1

minute to allow the repeater to restart completely.

Step 8. Restore your IP address settings

Follow the same process in Step 4, and restore your

original / recorded IP address settings.

Step 9. Connect your computer to repeater

wirelessly

1. From your computer, view your available wireless

connections and connect to the wireless access

point named “WiFi-Repeater.”

2. Type the password you just set up in Step 7.2, and

connect.

Congratulations! You should be able to surf the

Internet with your newly conﬁgured repeater

now.

Resetting the repeater and starting anew is

sometimes helpful when you’re having trouble

connecting.

To reset the device: Make sure the repeater is

connected to a power source, and push the device’s

reset button for 15 sec or until the indicator lights

turn o. Release the reset button, and wait 2

minutes to allow the repeater to restart completely.

Help: How do I reset my repeater?

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Uspeed Wifi repeater Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Uspeed Wifi repeater

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info